Accueil / Équipements / Armoire de stérilisation à bain d’eau / Water-Bath (Water-Shower) Sterilizer

SED-3.0SM-J

Sur devis

SED-3.0SM-J

SED · SED-3.0SM-J · En vedette

SED-3.0SM-J — Water-Bath Sterilizer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-3.0SM-J water-bath (water-shower) sterilizer with vacuum leak test. Two variants: (1) with side spray + motor-driven double doors, SS304 inner shell; (2) with hot-air drying (leak-detection/drying type) + sliding dou

GB150-2011 steel pressure vesselX-ray inspection certificateLabor-department pressure vessel quality certification

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

The sterilizer uses high-temperature circulating water (water-spray method) as the sterilization medium. Process: Start → auto-check utilities/equipment status → fill water to set level → water circulates from chamber bottom through circulation pump → plate heat exchanger internal channel → top spray nozzles showering items → heating phase (steam on HEX energy side) → sterilization phase (dual monitoring: F0 value + temperature/time) → cooling phase (cooling water on HEX energy side) → optional drain → end. The medium runs in a relatively closed loop; external hot/cold energy acts indirectly via the plate heat exchanger — no secondary contamination. Counter-pressure and equalization-pressure protection allows sterilization of glass bottles, ampoules, plastic bottles, and flexible plastic bags containing liquid preparations.

Processus de fonctionnement

1The sterilizer uses high-temperature circulating water (water-spray method) as the sterilization medium.

2Process: Start → auto-check utilities/equipment status → fill water to set level → water circulates from chamber bottom through circulation pump → plate heat exchanger internal channel → top spray nozzles showering items → heating phase (steam on HEX energy side) → sterilization phase (dual monitoring: F0 value + temperature/time) → cooling phase (cooling water on HEX energy side) → optional drain → end.

3The medium runs in a relatively closed loop; external hot/cold energy acts indirectly via the plate heat exchanger — no secondary contamination.

4Counter-pressure and equalization-pressure protection allows sterilization of glass bottles, ampoules, plastic bottles, and flexible plastic bags containing liquid preparations.

Caractéristiques techniques

Caractéristiques de la variante : SED-3 .0SM-J basic: vacuum leak-test + side spray

Caractéristiques

Modèle

SED-3.0SM-J

Tension

380V/50Hz,

Fluides et énergie

Drinking water 0.1–0.3 MPa; pure water 0.1–0.2 MPa; boiler steam 0.4–0.6 MPa; compressed air 0.5–0.7 MPa; AC 380 V 50 Hz three-phase five-wire 5.5 kW

Détails de conformité

Complies with GB150-2011 steel pressure vessel standard. Full X-ray inspection; complete labor-department quality certification supplied.

Puissance

5.5 kW

Pression d’air

0.5-0.7 MPa (compressed air)

Dimensions

Longueur

2350 mm

Largeur

2200 mm

Hauteur

2200 mm

Poids

3200 kg

Matériaux

Matériaux en contact

SS304 stainless steel inner shell (basic variant) / SS316 (drying variant); SS304 sanitary piping; SS304 sterilization cart and transport trolley

Matériaux du bâti

6 mm SS304 inner shell (or SS316) + Q345R pressure-vessel-grade reinforcement; 1.2 mm SS304 brushed-finish outer panels; 50 mm aluminum-silicate insulation

Caractéristiques principales

Water-bath (water-spray) circulating-water sterilization; temperature uniformity ≤ ±1 °C

Dual monitoring: F0 value + temperature/time

Gas-tight double-door (motor-driven or sliding), mutual interlock + pressure safety interlock

Door-not-sealed prevents steam admission; chamber pressurized prevents door opening (GMP safety interlock)

Vacuum leak-test function; optional hot-air drying (leak-detection/drying variant) or side spray

Plate heat exchanger indirect heating — no secondary contamination

Sparying (USA) spiral high-flow wide-angle nozzles for uniform shower coverage

Siemens S7-200 PLC (MTBF 50,000 h)

Real-time printout of pressure/temperature/time/F0 sterilization report

Supports F0-value and temperature-time dual monitoring modes

International brand core components (Siemens PLC, ASCO pneumatic valves, WILO pump, HUBA pressure transmitter) for long-term reliability

GB150-2011 pressure vessel standard + X-ray inspection + labor-department quality certification for strong regulatory compliance

Supports electronic signature + administrator privileges + multi-level password (GMP compliant)

ASCO angle-seat valves rated 4,000,000 cycles for low long-term operating cost

Applications

High/low-temperature sterilization of liquid preparations in glass bottles, ampoules, plastic bottles, and flexible bags

High/low-temperature sterilization of beverages and canned foods

Terminal sterilization of injectable large-volume parenterals

Secteurs

Pharmaceutique

Injectable preparations

Food canning

Beverage

Marques des composants

PLC

Siemens S7-200

HMI (touchscreen)

Siemens or Taiwan TRE

Angle-seat pneumatic valves

ASCO

Circulation pump

WILO

Pressure transmitter

HUBA

Solenoid valves

Airtac

Pressure gauges

BLD (Beijing Blide)

Safety valves

Guangyi

Plate heat exchanger

Yuanzhuo

Thermal printer

Weihuan (EPSON chip)

Temperature probes Pt100 Class-A

Iris

Vacuum pump (basic type)

Yulong water-ring

Vacuum generator (drying type)

FESTO

Spray nozzles

Sparying

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GB150-2011 steel pressure vessel

X-ray inspection certificate

Labor-department pressure vessel quality certification