Accueil / Équipements / Conditionneuse blister aluminium-plastique-aluminium / Aluminum-Plastic Aluminum (Tropical Aluminum / ALU-ALU) Blister Packaging Machine
SED-270TP-B
Sur devis
SED-270TP-B
SED · SED-270TP-B · En vedette
SED-270TP-B — Aluminum-Plastic Aluminum Blister Packaging Machine
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
Tropical aluminum (ALU-ALU) blister packaging machine built on the SED-270 cantilever flat-plate platform. Adds tropical aluminum (cold-form aluminum) forming and heat-sealing stations on top of the standard ALU-PVC capa
Délai de livraison
Sur devis
Cadence
10–35 blisters/min
Fonctionnement
Film forming proceeds through two parallel forming paths: conventional ALU-PVC forming (heat-assist thermoforming) and tropical ALU-ALU cold-form aluminium forming. In cold-form mode, the bottom aluminium foil is mechanically pressed into cavities without heating. Products are loaded into the formed cavities and sealed with an aluminium lidding foil under heat and pressure. Batch number embossing, creasing, and punching follow. Servo traction with eyemark registration maintains pitch accuracy throughout.
Processus de fonctionnement
1Film forming proceeds through two parallel forming paths: conventional ALU-PVC forming (heat-assist thermoforming) and tropical ALU-ALU cold-form aluminium forming.
2In cold-form mode, the bottom aluminium foil is mechanically pressed into cavities without heating.
3Products are loaded into the formed cavities and sealed with an aluminium lidding foil under heat and pressure.
4Batch number embossing, creasing, and punching follow.
5Servo traction with eyemark registration maintains pitch accuracy throughout.
Caractéristiques techniques
Caractéristiques de la variante : SED-270TP-B
Caractéristiques
Modèle
SED-270TP-B
Cadence
10–35 blisters/min
Tension
380V 50Hz
Fluides et énergie
380V 50Hz, 10 kW total power; compressed air >0.2 m3/min at 0.6-0.8 MPa (customer-provided); mould cooling water (running or circulating), consumption 60 L/h
Puissance
10 kW
Pression d’air
0.6-0.8 MPa (consumption >0.2 m³/min, self-provided)
Dimensions
Longueur
5360 mm
Largeur
850 mm
Hauteur
1750 mm
Poids
4000 kg
Emprise au sol
5360 x 850 x 1750 mm (L x W x H); working platform height 1400 mm
Matériaux
Matériaux en contact
Product-contact surfaces stainless steel; blister materials: non-toxic PVC 0.15-0.5 mm, PTP aluminium foil 0.02-0.035 mm, tropical aluminium 0.09-0.15 mm, cold-form aluminium foil 0.13-0.15 mm
Matériaux du bâti
Cantilever guide-rail machine body with front/rear split-frame design; stainless steel guard plates between mould bases
Caractéristiques principales
Dual forming capability: ALU-PVC thermoforming and ALU-ALU cold-form aluminium on the same machine
15-minute tool-free mould changeover via T-slot push-in guides and quick-lock handles
Lathe-type station adjustment with handwheel, positioner and scale ruler
Siemens PLC (S7-200 SMART) + Siemens HMI (6AV6648) + Siemens frequency converter for main drive
Mitsubishi servo traction drive (MR-JE-70A) with eyemark photoelectric closed-loop compensation
Cantilever structure separates operation zone from cam rotation zone for cleanliness and safety
Active PVC unwinding motor maintains constant film tension at any machine speed
Split machine body (2.2 m + 1.4 m) for sites with restricted access
Optional camera detection, vacuum rejection, photocell eyemark registration, and additional ALU-PVC moulds
Provides both standard ALU-PVC and high-protection ALU-ALU packaging on one platform
Maximum throughput 140 blisters/min (standard 80x57 mm, 4 blisters/cycle) at 35 cycles/min
Siemens electrical platform ensures parts availability and reliable after-sales support
Suitable for moisture-sensitive and light-sensitive pharmaceutical formulations requiring tropical climate protection
Applications
ALU-ALU cold-form blister packaging of moisture-sensitive tablets and capsules
ALU-PVC blister packaging of standard oral solid dosage forms
Pharmaceutical, medical, food, and nutraceutical blister packaging
Secteurs
Fabrication pharmaceutique
Nutraceutical packaging
Food packaging
Marques des composants
Siemens (HMI 6AV6648, PLC 6ES7288-1ST60, output modules 6ES7288-2DT08, analog module, frequency converter 6SL3210-5BE22, circuit breakers 5SL6 series)
Mitsubishi (traction servo drive MR-JE-70A, servo motor HG-KN73J-S100, encoder cable, power cable)
Schneider (emergency stop ZB2BS54C, jog button ZB2BA5C)
Omron (encoder E6B2-CWZ6C, relay group G6B-4BND)
SMC (air pressure alarm switch ISE20-N-01-L)
Tianhong (main motor MPF69-YEJ2.2)
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Conformité
GMP-compatible design
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial