SED-20VH-E
Sur devis
SED · SED-20VH-E · 2 unités vendues
SED-20VH-E — V-Type Mixer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-20VH-E V-Mixer (V-type mixer, available in single-arm and double-arm configurations) is used for uniform mixing of dry powders and granular materials in pharmaceutical, chemical, food, feed, ceramics, metallurgy, hea
Choisir une variante (2)
Délai de livraison
Sur devis
Cadence
16–96 L total volume (8 L working, 10 kg max load, 5.6 kg optimum)
Fonctionnement
The speed reducer drives the V-shaped cylinder in rotation. The asymmetric two-arm geometry creates differential potential energy as material is repeatedly split, recombined, and sheared during rotation, producing transverse and radial flow. Per revolution, approximately 25% of the material transfers from one arm to the other, achieving very uniform mixing. The closed butterfly valve at the discharge prevents dust escape.
Processus de fonctionnement
1The speed reducer drives the V-shaped cylinder in rotation.
2The asymmetric two-arm geometry creates differential potential energy as material is repeatedly split, recombined, and sheared during rotation, producing transverse and radial flow.
3Per revolution, approximately 25% of the material transfers from one arm to the other, achieving very uniform mixing.
4The closed butterfly valve at the discharge prevents dust escape.
Caractéristiques techniques
Caractéristiques de la variante : SED-20VH-E dimensions approx. 950×350×830 mm
Caractéristiques
Modèle
SED-20VH-E
Cadence
16–96 L total volume (8 L working, 10 kg max load, 5.6 kg optimum)
Fluides et énergie
Single-phase or three-phase electrical supply per machine nameplate; 0.55 kW motor; third-type grounding required. Operating temperature 5–40°C; relative humidity 20–85%. Clean and ventilated environment required.
Détails de conformité
Manufacturer: SED PHARMA INC (Guizhou Shengde Machinery Co., Ltd.). 12-month warranty from installation, not exceeding 16 months after delivery. Operating environment: 5–40°C, 20–85% RH. Engineer on-site startup cost: USD 300/person/day (all travel expenses borne by buyer).
Puissance
0.55 kW
Dimensions
Longueur
1195 mm
Largeur
350 mm
Hauteur
885 mm
Emprise au sol
Place on a flat, stable level floor. Reserve at least 1 m clearance on all sides for maintenance. Whole machine ships pre-assembled; only requires power connection and grounding. Double-arm footprint: approximately 1195×350 mm.
Matériaux
Matériaux en contact
Stainless steel (cylinder and butterfly-valve discharge)
Matériaux du bâti
Stainless steel material cylinder; painted steel rack/base
Fonctionnement
Best Loading
5.6 kg
Load Factor
40 %
Max Loading
10 kg
Rotating Speed
20 rpm
Working Volume
8 L
Caractéristiques physiques
Barrel Volume
20 L
Cylinder Diameter
220 mm
Inlet Diameter
133 mm
Outlet Diameter
76 mm
warranty
Warranty Period
12 months
Caractéristiques principales
Total volume 20 L; working volume 8 L; load factor 40%
Max loading 10 kg; optimum loading 5.6 kg
Motor power 0.55 kW; rotating speed 20 rpm
Mixing uniformity: coefficient of variation ≤5%
Cylinder diameter φ220 mm; inlet diameter φ133 mm; outlet diameter φ76 mm
Stainless steel cylinder; smooth inner wall; no dead corners
Closed butterfly-valve discharge — dust-free operation
Available in single-arm and double-arm configurations
GMP-compliant design
Timer, emergency stop, and jog controls
Dimensions (double-arm): 1195×350×885 mm
GMP-compliant stainless steel construction
No dead corners; high uniformity (CV ≤5%)
Dust-free closed butterfly-valve discharging
Compact laboratory / small-batch footprint
Optional vacuum suction feeding and forced mixing mechanism
Applications
Uniform mixing of dry powders and granular materials
Laboratory R&D / pilot-scale mixing
Trace additive / minor-phase blending
Small-batch pharmaceutical and nutraceutical formulations
Secteurs
Pharmaceutique
Health drinks / nutraceutical
Chemical
Food
Feed
Ceramics
Metallurgy
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Conformité
GMP (Good Manufacturing Practice) compliant
Nettoyage et entretien
Pre-shift: wipe outer surface with clean damp cloth; open machine and wipe inside; clean hopper with cloth and 75% industrial alcohol. Post-shift: wipe inside and outside; sanitize hopper with 75% industrial alcohol. Do not use machine when power-related safety covers are removed. Lubricate per maintenance schedule.
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial