Accueil / Équipements / Mélangeur-granulateur humide de production (≥200 L) / SED-200SZ-H 200L Wet Mixing Granulator

SED-200SZ-H

Sur devis

SED · SED-200SZ-H · 1 unités vendues

SED-200SZ-H — SED-200SZ-H 200L Wet Mixing Granulator

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-200SZ-H 200L Wet Mixing Granulator. A one-step granulator that mixes, wets and granulates dry powder in a single SUS304 chamber, meeting GMP standards. Widely used in pharmaceutical, chemical, food, powder metallurgy

GMP-compliant design

Délai de livraison

Sur devis

Cadence

80–480 kg/batch

Fonctionnement

A specially shaped 3-leaf blending wheel is rotated at controlled speed by the gearing, making material move in a regular helical 3-D motion for thorough mixing. The wetted soft mass is then cut into uniform granules in a short time by the high-speed rotary multi-layer herringbone cutter blades. The process of mixing, wetting and granulating runs automatically and continuously, completing in approximately 10 minutes.

Processus de fonctionnement

1A specially shaped 3-leaf blending wheel is rotated at controlled speed by the gearing, making material move in a regular helical 3-D motion for thorough mixing.

2The wetted soft mass is then cut into uniform granules in a short time by the high-speed rotary multi-layer herringbone cutter blades.

3The process of mixing, wetting and granulating runs automatically and continuously, completing in approximately 10 minutes.

Caractéristiques techniques

Caractéristiques de la variante : SED-200SZ-H

Caractéristiques

Modèle

SED-200SZ-H

Cadence

80–480 kg/batch

Fluides et énergie

Compressed air >0.5 MPa for shaft air seal and pneumatic discharge valve; electrical power per motor ratings.

Détails de conformité

Meets GMP standard. Export packing in seaworthy wooden case. 12-month warranty from installation, no more than 16 months from delivery. FOB Ningbo or Shanghai sea port.

Puissance

11 kW

Pression d’air

>0.5 MPa

Dimensions

Emprise au sol

No foundation required; install level on flat ground. Allow adequate clearance around the machine for future maintenance. Check electrical supply matches nameplate voltage before starting.

Matériaux

Matériaux en contact

SUS304 (mixing barrel, mixer blade, crusher blade, pneumatic open cover)

Matériaux du bâti

SUS304; channel stainless steel frame and sealing plate; 45# steel principal/crusher shafts

Caractéristiques principales

200 L volume, 80 kg per batch (60–80 kg/batch per manual)

Two-speed blending: 270/180 rpm at 9/11 kW

Two-speed cutter: 1500/3000 rpm at 4.5/5.5 kW

Working time 8–15 min; granule size 20–80 mesh

Mixing barrel: SUS304 stainless steel, no dead angles, conical top with pneumatic discharge valve

Silicon-rubber airproof seal between barrel and cover; dual air seal on drive shafts

Safety interlock: barrel lid or discharge opening prevents blending/cutter start

Snow-like loose granules, high uniformity and compressibility

Mixing, wetting and granulating in one barrel — avoids manual contamination

Snow-like loose granules; more particles, less fines, good compressibility

Saves binder by 20–25% vs. older granulation methods; shorter drying time

4× higher efficiency vs. traditional stirring + swing granulation

GMP-compliant design with advanced layout, reliable seal and safe operation

Applications

Pharmaceutical wet granulation

Powder mixing and granulation

Color/pigment uniform dispersion

Secteurs

Pharmaceutique

Chemical

Food

Powder metallurgy

Cosmétiques

Dyes

Detergents

Marques des composants

NSK (bearings)

Wuxi (mixing/crushing two-speed motors, reducer, discharge cylinder, transmission belt)

Delixi (electrical appliances)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP-compliant design

Nettoyage et entretien

Add water to barrel and run blender and cutter; barrel cover and discharge port have sealing components for effective cleaning.