Accueil / Équipements / Analyse d’humidité / Moisture Analyzer

SED-200SCD-Y

Sur devis

SED-200SCD-Y

SED · SED-200SCD-Y · 2 unités vendues

SED-200SCD-Y — Moisture Analyzer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

The SED-200SCD-Y is a halogen-lamp thermogravimetric moisture analyzer for rapid and precise determination of moisture content in pharmaceutical, food, grain, tobacco, paper, textile, mineral, and chemical raw material s

Accuracy Level 2 (per Chinese balance standard)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Halogen-lamp thermogravimetric drying: place sample on tared scale pan in the heated chamber; ring halogen lamp heats sample rapidly and uniformly while built-in precision balance continuously measures weight; firmware calculates and displays % moisture loss in real time. Drying continues until either timed completion or auto-mode (weight loss per unit time falls below threshold), then the final moisture value is locked and displayed. Touchscreen menus support weight calibration (single-point with 100 g weight or 4-point linearity), clock setting, AUTO DRY (unknown samples), TIME DRY (timed), RECORD (unit conversions), and DATABASE (up to 18 saved records).

Processus de fonctionnement

1Halogen-lamp thermogravimetric drying: place sample on tared scale pan in the heated chamber; ring halogen lamp heats sample rapidly and uniformly while built-in precision balance continuously measures weight; firmware calculates and displays % moisture loss in real time.

2Drying continues until either timed completion or auto-mode (weight loss per unit time falls below threshold), then the final moisture value is locked and displayed.

3Touchscreen menus support weight calibration (single-point with 100 g weight or 4-point linearity), clock setting, AUTO DRY (unknown samples), TIME DRY (timed), RECORD (unit conversions), and DATABASE (up to 18 saved records).

Caractéristiques techniques

Caractéristiques de la variante : SED-200SCD-Y

Caractéristiques

Modèle

SED-200SCD-Y

Tension

AC 220V 50Hz (or 120V 60Hz, 1-phase) - max 480 W

Fluides et énergie

AC 220V 50Hz (or 120V 60Hz), single-phase. Max 480 W during heating. Stable mains voltage required (no exceeding limits). Operating environment: 15-30 C, fluctuation <5 C/h, 50-85% RH (non-condensing). Avoid corrosive gas (H2S, NOx fluorides), strong magnetic/electric fields, direct sunlight or strong wind. Preheating 30 min after power-on recommended.

Détails de conformité

Frequent power-on recommended to keep instrument in stable thermal state and reduce preheat time. Periodic calibration check required. Operates per halogen thermogravimetric moisture-determination standards.

Puissance

0.48 kW

Dimensions

Longueur

360 mm

Largeur

215 mm

Hauteur

185 mm

Poids

4.5 kg

Emprise au sol

Desktop unit, 360 x 215 mm footprint, 170-185 mm height; 4.5 kg net weight. Place on solid stable working platform with at least 1 m clearance above for heat dissipation. Ground connection required.

Matériaux

Matériaux en contact

metal sample plate (90 mm diameter)

Matériaux du bâti

metal shell with halogen-resistant chamber

Composants

Output Interface

RS232C

Alimentation électrique

Max Power

480 W

Fonctionnement

Drying Technology

/Ring Halogen Lamp

Max Capacity

110 g

Moisture Accuracy

±0.5 (sample ≥3g) %

Moisture Range High

100 %

Moisture Range Low

0 %

Moisture Readability

0.01 %

Balance Readability

0.001 g

Repeatability

0.1 %

Temperature Control Accuracy

±1 °C

Temperature Range Max

200 °C

Time Control Max

99 min

Caractéristiques physiques

Pan Size

90 mm

Caractéristiques principales

Maximum sample weight 110 g

Balance readability 0.001 g (1 mg); calibration scale 10 mg

Moisture readability 0.01% (or 0.02-0.1% for samples >=3 g)

Moisture measurement accuracy +/-0.5% (sample >=3 g)

Repeatability 0.1%

Moisture content range 0-100%

Temperature range room temp to 200 C; accuracy +/-1 C

Heating time 0-99 min (1-min increments)

Ring halogen lamp heating element (rapid, uniform)

Color TFT touchscreen HMI with 9 display modes (moisture, dry weight, ATRO dry, ATRO wet, etc.)

Stop modes: timed (manual) or auto

RS232C output for PC / printer (9600 baud)

Single-point and 4-point linearity calibration

Up to 18 records saved in onboard database

End-of-heating buzzer

Sample plate diameter 90 mm

AC 220V 50Hz (also 120V 60Hz available); max 480 W

Fast: typical samples measured in just a few minutes

High precision: 1 mg balance + +/-0.5% moisture accuracy meets pharma/QC needs

Touchscreen with 9 display modes - flexible for different reporting requirements

RS232C interface for PC/printer integration in QC labs

Compact desktop unit (4.5 kg) - portable across labs

Unique high-precision insulated sensor for reliable temperature data

Applications

Free water / moisture content determination in raw materials

QC sampling in pharma manufacturing (granulation moisture, etc.)

Food, grain, tobacco, paper, textile moisture testing

Mineral and chemical raw material moisture analysis

Laboratory R&D moisture studies

Secteurs

Pharmaceutique

Food and grain processing

Tobacco

Paper

Textile

Mineral / mining

Chemical raw materials

Laboratory and R&D

Marques des composants

Imported halogen heating lamp

High-precision insulated thermal sensor

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Accuracy Level 2 (per Chinese balance standard)

Nettoyage et entretien

Keep clean and dust-free. Clean scale pan and shell with detergent and soft cloth; alcohol and gasoline are forbidden. Periodic check and recalibration recommended. After each measurement, allow chamber to cool to room temperature (open cover) before next sample.