SED-200SCD-Y
Consultar
SED-200SCD-Y
SED · SED-200SCD-Y · 2 unidades vendidas
SED-200SCD-Y — Moisture Analyzer
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
The SED-200SCD-Y is a halogen-lamp thermogravimetric moisture analyzer for rapid and precise determination of moisture content in pharmaceutical, food, grain, tobacco, paper, textile, mineral, and chemical raw material s
Plazo de entrega
Consultar
Capacidad de producción
Contáctenos
Funcionamiento
Halogen-lamp thermogravimetric drying: place sample on tared scale pan in the heated chamber; ring halogen lamp heats sample rapidly and uniformly while built-in precision balance continuously measures weight; firmware calculates and displays % moisture loss in real time. Drying continues until either timed completion or auto-mode (weight loss per unit time falls below threshold), then the final moisture value is locked and displayed. Touchscreen menus support weight calibration (single-point with 100 g weight or 4-point linearity), clock setting, AUTO DRY (unknown samples), TIME DRY (timed), RECORD (unit conversions), and DATABASE (up to 18 saved records).
Proceso de funcionamiento
1Halogen-lamp thermogravimetric drying: place sample on tared scale pan in the heated chamber; ring halogen lamp heats sample rapidly and uniformly while built-in precision balance continuously measures weight; firmware calculates and displays % moisture loss in real time.
2Drying continues until either timed completion or auto-mode (weight loss per unit time falls below threshold), then the final moisture value is locked and displayed.
3Touchscreen menus support weight calibration (single-point with 100 g weight or 4-point linearity), clock setting, AUTO DRY (unknown samples), TIME DRY (timed), RECORD (unit conversions), and DATABASE (up to 18 saved records).
Especificaciones técnicas
Especificaciones de la variante: SED-200SCD-Y
Especificaciones
Modelo
SED-200SCD-Y
Tensión
AC 220V 50Hz (or 120V 60Hz, 1-phase) - max 480 W
Suministros
AC 220V 50Hz (or 120V 60Hz), single-phase. Max 480 W during heating. Stable mains voltage required (no exceeding limits). Operating environment: 15-30 C, fluctuation <5 C/h, 50-85% RH (non-condensing). Avoid corrosive gas (H2S, NOx fluorides), strong magnetic/electric fields, direct sunlight or strong wind. Preheating 30 min after power-on recommended.
Detalles de conformidad
Frequent power-on recommended to keep instrument in stable thermal state and reduce preheat time. Periodic calibration check required. Operates per halogen thermogravimetric moisture-determination standards.
Potencia
0.48 kW
Dimensiones
Longitud
360 mm
Anchura
215 mm
Altura
185 mm
Peso
4.5 kg
Superficie de instalación
Desktop unit, 360 x 215 mm footprint, 170-185 mm height; 4.5 kg net weight. Place on solid stable working platform with at least 1 m clearance above for heat dissipation. Ground connection required.
Materiales
Materiales en contacto
metal sample plate (90 mm diameter)
Materiales del cuerpo
metal shell with halogen-resistant chamber
Componentes
Output Interface
RS232C
Electricidad
Max Power
480 W
Funcionamiento
Drying Technology
/Ring Halogen Lamp
Max Capacity
110 g
Moisture Accuracy
±0.5 (sample ≥3g) %
Moisture Range High
100 %
Moisture Range Low
0 %
Moisture Readability
0.01 %
Balance Readability
0.001 g
Repeatability
0.1 %
Temperature Control Accuracy
±1 °C
Temperature Range Max
200 °C
Time Control Max
99 min
Características físicas
Pan Size
90 mm
Características principales
Maximum sample weight 110 g
Balance readability 0.001 g (1 mg); calibration scale 10 mg
Moisture readability 0.01% (or 0.02-0.1% for samples >=3 g)
Moisture measurement accuracy +/-0.5% (sample >=3 g)
Repeatability 0.1%
Moisture content range 0-100%
Temperature range room temp to 200 C; accuracy +/-1 C
Heating time 0-99 min (1-min increments)
Ring halogen lamp heating element (rapid, uniform)
Color TFT touchscreen HMI with 9 display modes (moisture, dry weight, ATRO dry, ATRO wet, etc.)
Stop modes: timed (manual) or auto
RS232C output for PC / printer (9600 baud)
Single-point and 4-point linearity calibration
Up to 18 records saved in onboard database
End-of-heating buzzer
Sample plate diameter 90 mm
AC 220V 50Hz (also 120V 60Hz available); max 480 W
Fast: typical samples measured in just a few minutes
High precision: 1 mg balance + +/-0.5% moisture accuracy meets pharma/QC needs
Touchscreen with 9 display modes - flexible for different reporting requirements
RS232C interface for PC/printer integration in QC labs
Compact desktop unit (4.5 kg) - portable across labs
Unique high-precision insulated sensor for reliable temperature data
Aplicaciones
Free water / moisture content determination in raw materials
QC sampling in pharma manufacturing (granulation moisture, etc.)
Food, grain, tobacco, paper, textile moisture testing
Mineral and chemical raw material moisture analysis
Laboratory R&D moisture studies
Sectores
Farmacéutico
Food and grain processing
Tobacco
Paper
Textile
Mineral / mining
Chemical raw materials
Laboratory and R&D
Marcas de componentes
Imported halogen heating lamp
High-precision insulated thermal sensor
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Conformidad
Accuracy Level 2 (per Chinese balance standard)
Limpieza y mantenimiento
Keep clean and dust-free. Clean scale pan and shell with detergent and soft cloth; alcohol and gasoline are forbidden. Periodic check and recalibration recommended. After each measurement, allow chamber to cool to room temperature (open cover) before next sample.
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial