Accueil / Équipements / Appareil d’eau ultrapure / Laboratory Ultrapure Water System

SED-15CCS-Q

Sur devis

SED-15CCS-Q

SED · SED-15CCS-Q · En vedette

SED-15CCS-Q — Laboratory Ultrapure Water System

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

Laboratory ultrapure water system (SED-15CCS-Q), 10-15 L/h, produces water meeting Grade II laboratory standard. Inlet: municipal tap water. Dual outlets: drinkable purified water and ultrapure water (resistivity ≥15 MΩ·

Output meets Grade II laboratory water standard

Délai de livraison

Sur devis

Cadence

10–15 L/h

Fonctionnement

Tap water → precision sediment + activated carbon pre-treatment removes particles, chlorine, organics → booster pump (0-0.9 MPa) → reverse osmosis (RO) demineralizes water (pressure drives H2O through membrane while ions/organics/colloids are rejected and discharged as concentrate) → polishing mixed-bed (UK Purolite resin) raises resistivity to ≥15 MΩ·cm → 0.2μm terminal microfilter removes residual particles, pyrogens, and bacteria. Anti-scaling RO program periodically flushes the membrane.

Processus de fonctionnement

1Tap water → precision sediment + activated carbon pre-treatment removes particles, chlorine, organics → booster pump (0-0.9 MPa) → reverse osmosis (RO) demineralizes water (pressure drives H2O through membrane while ions/organics/colloids are rejected and discharged as concentrate) → polishing mixed-bed (UK Purolite resin) raises resistivity to ≥15 MΩ·cm → 0.2μm terminal microfilter removes residual particles, pyrogens, and bacteria.

2Anti-scaling RO program periodically flushes the membrane.

Caractéristiques techniques

Caractéristiques de la variante : SED-15CCS-Q

Caractéristiques

Modèle

SED-15CCS-Q

Cadence

10–15 L/h

Tension

220V

Fluides et énergie

Inlet: municipal tap water, TDS conductivity <200 μS/cm, pressure >0.1 MPa, temperature 5-40°C. Power: 220V, 50W. Drain for RO concentrate.

Détails de conformité

Outlet ultrapure water: conductivity ≤0.07 μS/cm, resistivity 15 MΩ·cm. Suitable for hemodialysis, IV preparation, and other pharmaceutical-grade applications.

Puissance

0.05 kW

Dimensions

Longueur

610 mm

Largeur

485 mm

Hauteur

713 mm

Poids

26 kg

Emprise au sol

61 × 48.5 × 71.3 cm bench-top, 26 kg

Matériaux

Matériaux en contact

Food-grade PE tubing; SS pressure gauges; quick-connect plastic fittings

Matériaux du bâti

Standard cabinet (not specified)

Caractéristiques principales

Output 10-15 L/h

Dual outlet: pure water (drinkable) + ultrapure water (≥15 MΩ·cm)

Six-stage purification with quick-connect cartridges

Built-in online resistivity meter (Keda brand)

Online pressure display (2× SS pressure gauges, 0-7 MPa)

Automatic RO membrane flushing on startup, anti-scaling program

Low/high pressure auto-shutoff and system interlock protection

Water-low / water-full auto stop

Booster pump 0-0.9 MPa pressure range

Microcomputer control panel

Compact bench-top: 610×485×713 mm, 26 kg, 50 W

Output 40× higher than comparable imported lab products at 1/50 the operating cost

Original-water utilization 60-80% when feed <250 μS/cm, hardness ≤100 ppm

Quick-connect components for easy validation, calibration, maintenance, cleaning, sanitization, sampling

CSM anti-fouling RO membrane

UK Purolite polishing resin for high resistivity

Compact bench-top: 61×48.5×71.3 cm, only 26 kg, 50W

Applications

Electronics: monocrystalline silicon, semiconductor, IC chip packaging, displays, PCB

Pharmaceutical: large infusion (LVP), formulations, hemodialysis water

Coating: electroplating, battery, electrophoretic paint

Chemical industry: pharmaceuticals, dyeing, fine chemicals, cosmetics

Lab use: factory/university/company production labs, chemistry/physics labs, pilot plants, hospital biochemistry

Analysis & testing

Secteurs

Pharmaceutique

Electronics

Healthcare / hospital lab

Chemical / fine chemical

University / research lab

Coating / surface treatment

Marques des composants

CSM — RO membrane (anti-fouling,100G)

Purolite UK — polishing resin

Keda — online resistivity meter

Domestic — booster pump, solenoid valve, control panel

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Output meets Grade II laboratory water standard

Nettoyage et entretien

Periodic consumable replacement: 1μm PP cartridge every 1-3 months; activated carbon every 3-6 months; ultrapure cartridges every ~1000-2000L; terminal microfilter every 3-12 months; RO membrane every 1-2 years. If idle >1 month, soak in disinfectant or run periodically.