Accueil / Équipements / Redresseuse de flacons LP (cadence en BPM, basse–moyenne) / High-Speed Bottle Unscrambler — SED-150LP

SED-150LP

Ontario, CA

SED · SED-150LP · 15 unités vendues

SED-150LP

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-150LP High-Speed Bottle Unscrambler is an integrated electromechanical unit for automatically aligning, orienting and discharging round/square/oval/special-shape plastic bottles at up to 60–180 bottles/min, eliminati

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

60–180 flacons/min

Fonctionnement

Operator loads empty bottles into the 220L hopper. An elevator feeds them into a rotating disc where centrifugal force orients them in neck-leading and base-leading positions and pushes them onto the infeed belt. Twin synchronous wheels separate bottle spacing. A hook mechanism then inverts neck-leading bottles into base-leading position so that all bottles can be tipped upright by the calibration mechanism, exiting mouth-up to the downstream conveyor.

Processus de fonctionnement

1Operator loads empty bottles into the 220L hopper.

2An elevator feeds them into a rotating disc where centrifugal force orients them in neck-leading and base-leading positions and pushes them onto the infeed belt.

3Twin synchronous wheels separate bottle spacing.

4A hook mechanism then inverts neck-leading bottles into base-leading position so that all bottles can be tipped upright by the calibration mechanism, exiting mouth-up to the downstream conveyor.

Caractéristiques techniques

Caractéristiques de la variante : SED-150LP-C box-type unscrambler with Siemens PLC/touch-screen

Caractéristiques

Modèle

SED-150LP

Cadence

60–180 flacons/min

Tension

220V 50Hz single-phase (110V/220V/380V customizable)

Fluides et énergie

220V 50Hz single-phase (110V/220V/380V customizable) at 1.2 kW; compressed air 0.6 MPa, 3.5 L/min; proper third-type grounding.

Détails de conformité

Designed to GMP standards; equipped with overload protection and emergency-stop button.

Puissance

1.2 kW

Pression d’air

0.6 MPa, 3.5 L/min

Dimensions

Longueur

2400 mm

Largeur

1050 mm

Hauteur

1450 mm

Poids

630 kg

Emprise au sol

Reserve at least 1 m clearance around the machine for safe operation and maintenance; rear access required for servicing. Adjustable feet allow ±50 mm height adjustment to match the production line.

Matériaux

Matériaux en contact

High-quality stainless steel (housing and bottle hopper)

Matériaux du bâti

High-quality stainless steel

Compatibilité

Applicable Bottle Types

round, square, flat-square, irregular plastic bottles

Fonctionnement

Consommation d’air

3.5 L/min

Caractéristiques physiques

Capacité de la trémie

220 L

Caractéristiques principales

Capacity 60–180 bottles per minute

Handles round, square, flat-square, and special-shape plastic bottles: diameter 20–100 mm, height 20–150 mm

220L hopper with stair/elevator feed

Centrifugal rotating disc with twin synchronous spacing wheels

Hook-mechanism inversion station automatically rights mouth-down bottles

Inverted-bottle detection and rejection

Delta touch-screen PLC with automatic and manual modes

Adjustable feed-bottle delay, jam-detection delay and motor frequencies via parameter screen

Alarm history log

Adjustable feet (±50 mm) for line-height matching

Quantitative bottle-discharge control and overload protection

Noise level ≤70 dB

Stainless-steel body and hopper meet GMP standards

Wide compatibility — one machine handles multiple bottle shapes/sizes via change-mold

Compact footprint and high speed compared with traditional unscramblers

Intelligent joint control with upstream and downstream equipment, no dedicated operator needed

Top-tier OEM components (Delta, MEAN WELL, Schneider, AirTAC, SICK, MAILI)

Reliable — imported low-voltage components, low fault rate

Easy to clean and maintain

Applications

Plastic-bottle unscrambling for tablet/capsule counting and bottling lines

Feeding of bottles to filling, capping and labeling lines

Round/square/flat-square/special-shape plastic bottle orientation

Secteurs

Pharmaceutique

Agroalimentaire et boissons

Cosmetics / light industry

Chemical industry

Condiments / juice / dairy

Marques des composants

MAILI — rotating disc motor, bottle-sorter motor

Delta, Taiwan — touch screen, PLC main control system, inverter

AYMOTOR/— alternate inverter

MEAN WELL, Taiwan — switching power supply

Schneider, France — emergency-stop switch, miniature circuit breaker

AirTAC, Taiwan — pneumatic components

SICK, Germany — photoelectric bottle sensor

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Wipe outer surfaces and conveying tracks with a clean wet towel before production and after each shift. Open the hood and wipe internal surfaces; clean inside and outside of the hopper with a clean towel and 75% industrial alcohol. Clean mechanical parts with detergent (alcohol). Use a dry cloth on the touch screen, signal lights, photoelectric sensor windows and pressure switches. Lubricate the conveyor transmission chain and width-adjustment knobs monthly with oil (0–35°C) or every three months with grease (>35°C / <0°C). Dust the electrical control cabinet weekly.