Accueil / Équipements / Mélangeur à cuve / Groove Type Mixing Machine

SED-150CH-B

Sur devis

SED-150CH-B

SED · SED-150CH-B · En vedette

SED-150CH-B — Groove Type Mixing Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-150CH-B Groove Type Mixing Machine. For pharmaceutical, chemical and food industries to evenly mix powdery or paste materials. S-type stirrer rotates via mechanical transmission and moves material reciprocally for un

Choisir une variante (6)

Délai de livraison

Sur devis

Cadence

120–720 L per batch

Fonctionnement

Mechanical transmission drives an S-type (single-S) stirrer rotating inside a U-/groove-shaped drum. The stirrer pushes material back and forth along the drum to achieve uniform mixing of major and minor components. After mixing, the drum is tilted approximately 45 degrees and the discharge motor empties the contents through the discharge port.

Processus de fonctionnement

1Mechanical transmission drives an S-type (single-S) stirrer rotating inside a U-/groove-shaped drum.

2The stirrer pushes material back and forth along the drum to achieve uniform mixing of major and minor components.

3After mixing, the drum is tilted approximately 45 degrees and the discharge motor empties the contents through the discharge port.

Caractéristiques techniques

Caractéristiques de la variante : SED-100CH-B 100L

Caractéristiques

Modèle

SED-150CH-B

Cadence

120–720 L per batch

Tension

380V or 220V (per customer)

Fluides et énergie

380V or 220V three-phase supply with proper grounding; ambient 5-40 °C, RH 20-85%; clean, vibration-free site

Puissance

3.55 kW

Dimensions

Longueur

1800 mm

Largeur

600 mm

Hauteur

1150 mm

Poids

300 kg

Emprise au sol

1800 x 600 x 1150 mm; reserve at least 1 m around equipment for service

Matériaux

Matériaux en contact

304 stainless steel (drum and stirrer)

Matériaux du bâti

Carbon-steel frame; 304 stainless-steel material-contact parts

Caractéristiques principales

Working volume 150 L per batch

Single S-type stirrer, 0-24 rpm, 360° discharge tilt

Stirring motor 3 kW; discharge motor 0.55 kW

Total connected load ~3.55 kW

Footprint 1800 x 600 x 1150 mm; weight 300 kg (user-manual spec) / 420 kg (Chinese spec sheet)

Material-contact parts in 304 stainless steel

Stirrer close to drum, no dead corner; sealed both ends of stirring shaft

Programmable mixing time with auto-stop

Electric (tilt-out) discharge system

Suitable for powdery, granular, wet and paste materials with good fluidity

380V or 220V supply, configurable to customer requirement

Stirrer close to drum eliminates dead corners — uniform mix of major and minor components

Both ends of stirring shaft sealed against leakage

Programmable mixing time + auto-stop improves batch consistency

Tilt-out electric discharge speeds changeover

Material-contact parts in 304 stainless steel meets pharma/food requirements

Voltage selectable: 380V or 220V per customer

Applications

Powder mixing

Wet/paste material mixing

Mixing of major and subsidiary materials at varying ratios

Secteurs

Pharmaceutique

Health care

Agroalimentaire et boissons

Chemical

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Pre-production: wipe outer/inner surfaces with clean wet towel; wipe material cylinder with clean towel then 75% industrial alcohol. Post-shift: wipe inside and outside with wet towel; wipe cylinder with towel then 75% industrial alcohol for sterilization.