SED-1500FZ-U
Sur devis
SED-1500FZ-U
SED · SED-1500FZ-U · En vedette
SED-1500FZ-U — Mélangeur à cône carré
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-1500FZ-U Square Cone Mixer (high-spec U revision) — 1,500 L total / 800 L working / 400 kg loading SS316L pharma-grade total mixer for granule-granule, granule-powder, and powder-powder blending. 30° tilt-axis design
Choisir une variante (1)
Délai de livraison
Sur devis
Cadence
Contactez-nous
Fonctionnement
Material is loaded into the SS316L mixing pan and the lid is locked with a silicone-rubber seal. The operator sets mixing time and speed on the 7" touch-screen HMI; the variable-frequency drive ramps the 5.5 kW motor through a worm-gear reducer to rotate the pan at 3–10 rpm. Because the pan axis is offset 30° from the rotation axis, material tumbles and also rolls tangentially along the pan wall, producing intense fold-and-cross mixing. At preset time, the system stops vertically (pan upright). To discharge, the operator opens the DN200 anti-mis-operation butterfly valve at the lower apex.
Processus de fonctionnement
1Material is loaded into the SS316L mixing pan and the lid is locked with a silicone-rubber seal.
2The operator sets mixing time and speed on the 7" touch-screen HMI; the variable-frequency drive ramps the 5.5 kW motor through a worm-gear reducer to rotate the pan at 3–10 rpm.
3Because the pan axis is offset 30° from the rotation axis, material tumbles and also rolls tangentially along the pan wall, producing intense fold-and-cross mixing.
4At preset time, the system stops vertically (pan upright).
5To discharge, the operator opens the DN200 anti-mis-operation butterfly valve at the lower apex.
Caractéristiques techniques
Caractéristiques de la variante : SED-1500FZ-U high-spec SS316L 1
Caractéristiques
Modèle
SED-1500FZ-U
Fluides et énergie
Electrical supply for 5.5 kW VFD-driven motor. Cabling between control cabinet and machine is buyer-supplied.
Détails de conformité
Fully meets pharmaceutical GMP requirements: no dead corners, no exposed screws, mirror-polished SS316L interior (Ra ≤0.4–0.6 µm), silicone lid seal, food-grade polymer gaskets. 1-year warranty; 48-hour service response.
Puissance
5.5 kW
Dimensions
Poids
900 kg
Matériaux
Matériaux en contact
SS316L stainless steel (rotating barrel 3 mm, mixing pan, Φ400 inlet, mirror-polished interior Ra ≤0.4–0.6 µm); stainless steel DN200 butterfly discharge valve; food-grade silicone gaskets
Matériaux du bâti
SS316L barrel and inlet; SS304 1.5 mm control cabinet; SS304 2 mm optional loading stairs; #45 carbon steel rotating main shaft; assembled steel frame
Caractéristiques principales
1,500 L total / 800 L working / 400 kg loading capacity
30° offset rotation axis for combined tumble + tangential motion — ≥99% uniformity
VFD-controlled rotation 3–10 rpm
5.5 kW Wuxi Jinlong motor + Yidrive VFD
Worm-gear reducer (Changzhou Yannuo)
SS316L mirror-polished interior, Ra ≤0.4–0.6 µm; matte exterior Ra ≤1.2 µm
No dead corners, no exposed screws, all radii rounded
Silicone rubber lid seal
Easy-clean DN200 discharge butterfly valve with anti-mis-operation interlock
LG (Korea) PLC + 7" Kinco touch-screen + CHINT electrics
Auto vertical-stop at end of cycle
Top-tier U-revision: SS316L (vs FZ-B SS304), mirror polish, GMP-grade finish
Mixing uniformity ≥99% — qualifies as a final/total mixer for solid-dose pharma
PLC + HMI + VFD vs basic FZ-B fixed-speed contactor control
Special anti-mis-operation butterfly valve avoids accidental discharge during run
Optional loading platform for ergonomic top-feeding
1-year warranty + 48-hour field-service response + bi-annual customer follow-up
Applications
Total mixing in pharmaceutical solid-dose lines
Granule-granule, granule-powder, powder-powder blending
Pre-compression mix preparation
Secteurs
Pharmaceutical solid preparation
Chemical
Food
Marques des composants
LG / Korea — PLC
Kinco/— 7" touch screen (Shenzhen)
Yidrive/— 5.5 kW VFD
Wuxi Jinlong/— 5.5 kW motor
Changzhou Yannuo/— worm-gear reducer
Wuxi — food-grade silicone seal/gasket
Harbin/— bearings
Henan — sprockets
CHINT/— electrical components (Zhejiang)
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Conformité
GMP-compliant
Nettoyage et entretien
All product-contact surfaces rounded — no dead zones or residue. Easy-clean DN200 butterfly valve at apex. SS316L mirror polish for fast wash-down.
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial