Accueil / Équipements / Ligne d’extraction d’huile de coco / Coconut Oil Refining Production Line

SED-1250YZYX-F

Sur devis

SED-1250YZYX-F

SED · SED-1250YZYX-F · En vedette

SED-1250YZYX-F — Coconut Oil Refining Production Line

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

10 T/D coconut oil refining production line for edible oil refining. Continuous mechanized line covering refining, bleaching, deodorization, and vacuum stages with automatic-welded vessels and S-shaped heating/cooling co

Choisir une variante (6)

Délai de livraison

Sur devis

Cadence

10 T/D

Fonctionnement

Crude coconut oil is alkali-refined in a refining tank with S-shaped heating coils and wing stirrer to remove free fatty acids; soap-stock is separated and pumped out. Refined oil is then dried and decolorized in a bleaching tank with activated bleaching clay (80-150 kg/t) and filtered through a leaf vibration filter. Bleached oil enters a stainless-steel deodorization tank where high-pressure steam jets and a triple-stage water-steam vapor jet vacuum strip volatile odor compounds, producing high-smoking-point edible oil. Heating is supplied by an organic heat carrier (thermal oil) furnace; vacuum and cooling are recirculated through dedicated pumps and a cooling tower.

Processus de fonctionnement

1Crude coconut oil is alkali-refined in a refining tank with S-shaped heating coils and wing stirrer to remove free fatty acids; soap-stock is separated and pumped out.

2Refined oil is then dried and decolorized in a bleaching tank with activated bleaching clay (80-150 kg/t) and filtered through a leaf vibration filter.

3Bleached oil enters a stainless-steel deodorization tank where high-pressure steam jets and a triple-stage water-steam vapor jet vacuum strip volatile odor compounds, producing high-smoking-point edible oil.

4Heating is supplied by an organic heat carrier (thermal oil) furnace; vacuum and cooling are recirculated through dedicated pumps and a cooling tower.

Caractéristiques techniques

Caractéristiques de la variante : Refining tank LYY180

Caractéristiques

Modèle

SED-1250YZYX-F

Cadence

10 T/D

Fluides et énergie

Electricity ≤65 kWh per tonne crude oil; steam ≤320 kg per tonne crude oil; water ≤0.2 t per tonne crude oil; bleaching clay 80-150 kg/t (depending on crude oil quality); diesel for organic heat carrier furnace (400,000 kcal); compressed air from on-board V-0.6/0.7-C compressor.

Puissance

88.5 kW

Dimensions

Longueur

28000 mm

Largeur

8000 mm

Hauteur

8000 mm

Emprise au sol

Workshop 28 m × 8 m × 8 m (L × W × H), plus outdoor area for organic heat carrier furnace, cooling tower, thermal oil pumps and water pumps.

Matériaux

Matériaux en contact

acier inoxydable; Carbon steel; Polypropylene

Matériaux du bâti

Carbon steel; acier inoxydable

Caractéristiques principales

Continuous mechanized refining-bleaching-deodorization-vacuum line, reducing labor cost

Sealed bleaching and deodorization sections; whole equipment uses automatic welding for clean appearance

Refining tank with double-speed motor, S-shaped heating coils and wing-type stirrer for fast heat-up and uniform water washing

Drying & decolorization tank with double-layer S-shaped coils for rapid heat-up and cool-down

Stainless-steel deodorization tank with high-pressure steam jet system and double-layer S-shaped coils

Energy-saving low-frame vapor jet vacuum pump with high suction rate and steam savings

Outdoor organic heat carrier furnace (400,000 kcal) with diesel fuel for stable thermal supply

Dedicated cooling tower (100 m³/h) and circulation pumps for thermal management

10 T/D capacity sized for small-to-mid edible oil producers

Produces refined oil meeting yellow ≤25 / red ≤2.5 Lovibond color, smoking point ≥205 °C, acid value ≤0.30 mg KOH/g

Mechanization and continuous flow lower labor headcount versus batch refining

Automatic welding gives a clean, leak-tight appearance suited to food-grade plants

Energy-saving vapor jet vacuum reduces steam consumption versus conventional ejectors

Specifies clear consumption norms (≤65 kWh/t, ≤320 kg steam/t, ≤0.2 t water/t) for predictable opex

Applications

Coconut oil refining (crude to edible)

Edible vegetable oil refining (alkali refining, bleaching, deodorization)

Small-to-mid scale edible oil refinery plants

Secteurs

Edible oil processing

Coconut oil production

Food and oils & fats manufacturing

Marques des composants

CHNT (electrical components)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →