Accueil / Équipements / Enrobeuse simple / SED-1250JB-E Simplified (Sugar/Film) Coating Machine

SED-1250JB-E

Sur devis

SED-1250JB-E

SED · SED-1250JB-E · En vedette

SED-1250JB-E — SED-1250JB-E Simplified Coating Machine

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1250JB-E Simplified Coating Machine applies sugar or film coating to the exterior of Chinese and Western medicine tablets. Integrates the original sugar-coating drum with a controllable hot-air system and automatic s

GMP compliant (material contact parts)

Choisir une variante (4)

Délai de livraison

Sur devis

Cadence

80–150 kg/batch

Fonctionnement

Tablets are loaded into a 1250 mm rotating coating pan inclined at an adjustable angle (15–45°, typical 30°). As the pan rotates clockwise (0–28 rpm, frequency-controlled), tablets tumble through a spray zone where an atomizing spray gun applies coating solution. Simultaneously, controllable hot air (room temperature to 80°C) dries the applied coating. Fixed baffles inside the pan ensure the optimal tablet trajectory for uniform coating.

Processus de fonctionnement

1Tablets are loaded into a 1250 mm rotating coating pan inclined at an adjustable angle (15–45°, typical 30°).

2As the pan rotates clockwise (0–28 rpm, frequency-controlled), tablets tumble through a spray zone where an atomizing spray gun applies coating solution.

3Simultaneously, controllable hot air (room temperature to 80°C) dries the applied coating.

4Fixed baffles inside the pan ensure the optimal tablet trajectory for uniform coating.

Caractéristiques techniques

Caractéristiques de la variante : SED-800JB-E 30–50 kg/batch

Caractéristiques

Modèle

SED-1250JB-E

Cadence

80–150 kg/batch

Fluides et énergie

Single/three-phase electrical supply per nameplate; compressed air 4–6 kg/cm² via Ø8 PU pipe (customer-supplied compressor); ventilated clean room 5–40°C, 20–85% RH; Type-3 grounding ≤4 Ω.

Détails de conformité

Material-contact parts are 304 stainless steel meeting GMP requirements. Equipment must be reliably grounded with grounding resistance ≤4 Ω.

Puissance

2.2 kW

Pression d’air

4-6 kg/cm²

Dimensions

Longueur

1350 mm

Largeur

1350 mm

Hauteur

1600 mm

Poids

500 kg

Emprise au sol

1350×1350 mm machine footprint; height 1600 mm. Maintain ≥1 m clearance on all sides for maintenance and safe operation.

Matériaux

Matériaux en contact

304 acier inoxydable

Matériaux du bâti

304 acier inoxydable

Caractéristiques principales

1250 mm coating drum diameter

80–150 kg per batch capacity

Frequency-converter speed control (0–28 rpm), forward/reverse

Adjustable drum tilt 15–45° (typical 30°)

Controllable hot-air system, room temperature to 80°C

Internal heating 3 kW + external heating 3 kW (6 kW total)

Blower fan 370 W

Spray gun model RA-C1

Compressed air supply 4–6 kg/cm² (customer-supplied compressor)

Dimensions 1350×1350×1600 mm; weight 500 kg

304 stainless steel material-contact parts (GMP compliant)

Reliable Type-3 grounding required (≤4 Ω)

Simple, easy-to-operate sugar/film coating with smooth, glossy, fine tablet surface

Saves coating excipient material

Easy maintenance with replaceable wear parts

Integrated electrical, pneumatic and hydraulic control in one upgraded machine

12-month warranty after installation, lifetime maintenance and 24-hour online support

Applications

Sugar coating of pharmaceutical tablets

Film coating of pharmaceutical tablets

Coating of Chinese medicine tablets

Coating of Western medicine tablets

Secteurs

Fabrication pharmaceutique

Traditional Chinese medicine

Nutraceutical / supplement tableting

Marques des composants

HLP-A series inverter

SAJ8000-M series inverter

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP compliant (material contact parts)

Nettoyage et entretien

Pre-production: wipe outer surface and interior with clean wet cloth; wipe drum with clean cloth then 75% industrial alcohol. Post-shift: wipe inside and outside with clean wet cloth; wipe drum with cloth then 75% industrial alcohol. After every shift, rinse spray gun, liquid cylinders and pipes with water.