Accueil / Équipements / Sécheur centrifuge à grande vitesse pilote/petite production (5–50 kg/h) / SED-PG Series Centrifugal Spray Dryer

SED-10PG-Q

Sur devis

SED-10PG-Q

SED · SED-10PG-Q · En vedette

SED-10PG-Q — SED-PG Series Centrifugal Spray Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-10PG-Q centrifugal spray dryer with 10 kg/h water evaporation capacity, 50-300°C inlet, 30-150°C outlet, 18 kW electric heater (24 kW total power), 36,000 rpm centrifugal atomizing head (Φ52 mm disk), PLC control wit

Délai de livraison

Sur devis

Cadence

8.5–10.5 kg water evaporated/h

Fonctionnement

Air is filtered, heated and enters the hot-air distributor at the chamber top, spiralling uniformly into the chamber. Feed liquid is filtered and pumped to the centrifugal atomizer head at the chamber top, sprayed into very fine droplets that contact hot air with very large surface area; moisture evaporates rapidly and dries to granular product within seconds. Wet exhaust is captured at tower bottom + cyclone separator and exhausted via blower.

Processus de fonctionnement

1Air is filtered, heated and enters the hot-air distributor at the chamber top, spiralling uniformly into the chamber.

2Feed liquid is filtered and pumped to the centrifugal atomizer head at the chamber top, sprayed into very fine droplets that contact hot air with very large surface area; moisture evaporates rapidly and dries to granular product within seconds.

3Wet exhaust is captured at tower bottom + cyclone separator and exhausted via blower.

Caractéristiques techniques

Caractéristiques de la variante : SED-10PG-Q

Caractéristiques

Modèle

SED-10PG-Q

Cadence

8.5–10.5 kg water evaporated/h

Tension

380V

Puissance

24 kW

Dimensions

Longueur

2100 mm

Largeur

1200 mm

Hauteur

2450 mm

Matériaux

Matériaux en contact

acier inoxydable

Matériaux du bâti

Stainless steel main tower Φ1200×1400 mm; square-tube stainless steel frame; 50 mm insulation cotton; Q235A steel induced draft fan

Caractéristiques principales

Fast drying — 95-98% moisture evaporated in seconds

Suitable for heat-sensitive materials (co-current flow)

Wide application — polymers, dyes, pigments, ceramics, dairy, fish/blood products, fertilisers, organic/inorganic compounds

Good product dispersibility, flowability and solubility

Single-step processing of 40-60% (or up to 90%) moisture solutions into powder — no crushing/screening required

Centrifugal atomizing head, electric drive, 36,000 rpm, Φ52 mm spray disk

PLC control with 7" touchscreen

Mobile design with castor wheels

Compact spray dryer with PLC and 7" touchscreen

Wide application range across pharmaceutical, food and chemical sectors

Applications

Pilot-scale spray drying R&D

Heat-sensitive material drying

Polymer, dye, pigment, dairy, pharmaceutical drying

Secteurs

Pharmaceutique

Chemical

Food

Dyes and pigments

Marques des composants

Weicon — 7" touchscreen

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →