Accueil / Équipements / Sécheur centrifuge à grande vitesse pilote/petite production (5–50 kg/h) / SED-PG Series High-Speed Centrifugal Spray Dryer

SED-10PG-N

Sur devis

SED-10PG-N

SED · SED-10PG-N · En vedette

SED-10PG-N — SED-PG Series High-Speed Centrifugal Spray Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-10PG-N high-speed centrifugal spray dryer with 10 kg/h water evaporation capacity, electric heating, inlet 100-200°C, outlet 55-105°C, 25.15 kW total power, 304 stainless steel material-contact parts, cyclone + bag f

Délai de livraison

Sur devis

Cadence

8.5–10.5 kg water evaporated/h

Fonctionnement

Filtered, heated air enters the air distributor at the top of the dryer and spirals uniformly into the chamber. Slurry from a feed tank is pumped via screw pump to a high-speed centrifugal atomizer at the tower top, broken into fine droplets that contact hot air co-currently; rapid heat and mass transfer dries the droplets into powder within seconds. The dried powder + exhaust pass through cyclone and bag filter for collection; tail gas is exhausted by induced draft fan.

Processus de fonctionnement

1Filtered, heated air enters the air distributor at the top of the dryer and spirals uniformly into the chamber.

2Slurry from a feed tank is pumped via screw pump to a high-speed centrifugal atomizer at the tower top, broken into fine droplets that contact hot air co-currently; rapid heat and mass transfer dries the droplets into powder within seconds.

3The dried powder + exhaust pass through cyclone and bag filter for collection; tail gas is exhausted by induced draft fan.

Caractéristiques techniques

Caractéristiques de la variante : SED-10PG-N

Caractéristiques

Modèle

SED-10PG-N

Cadence

8.5–10.5 kg water evaporated/h

Tension

380V, 50Hz

Puissance

25.15 kW

Dimensions

Longueur

2180 mm

Largeur

1680 mm

Hauteur

3200 mm

Matériaux

Matériaux en contact

304 acier inoxydable

Matériaux du bâti

304 stainless steel inner/outer (delta=2 mm); 50 mm aluminium silicate insulation; carbon steel control cabinet (painted)

Caractéristiques principales

High automation, good safety, low energy consumption

Heating, drying tower and gas-solid separation systems all designed with margin to ensure capacity and quality

Air hammer on main body — pulsed compressed-air shock to dislodge powder adhering to walls

Electric centrifugal atomizer with stable operation, uniform atomization and long life

Carbon steel control cabinet with all motors independently start/stop, frequency-controlled feed rate (interlocked with outlet temperature) and atomizer speed

Auto temperature control with digital display (<=±5°C error)

Cyclone separator + bag filter for 99% recovery rate

Pressure differential transmitter for in-tower negative pressure display

99% material recovery via cyclone + bag filter

Frequency-controlled feed and atomizer with outlet temperature interlock

Air hammer mitigates powder wall sticking

Applications

Liquid material drying — solutions, slurries

Pharmaceutical, food and chemical drying applications

Secteurs

Pharmaceutique

Chemical

Food

Marques des composants

Chint (Zhejiang Chint) — electrical components

Jingjiang — XH-10 centrifugal atomizer (0.75 kW)

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →