Accueil / Équipements / Remplisseuse de sauces épaisses avec agitation / SED-10JNG-P

SED-10JNG-P

Sur devis

SED · SED-10JNG-P · 3 unités vendues

SED-10JNG-P

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-10JNG-P is a pneumatically-driven, single-head semi-automatic horizontal liquid/cream filling machine for daily chemicals, food and beverage, pharmacy and chemistry. It dispenses doses of liquids and creams (20-2000

GMP (mirror-polished interior Ra <= 0.2-0.4 um per GMP requirements)

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

10–20 cycles/min

Fonctionnement

Material in the hopper feeds via a rotary disk valve into a stainless cartridge. A pneumatic cartridge cylinder draws the piston back to suck a measured volume from the hopper (rotary disk valve in suction position), then the rotary disk rotates to discharge position and the piston pushes the dose out through the discharge nozzle with anti-drip seal ring. Filling volume is set with a hand-wheel that positions the rear magnetic switch on the cartridge cylinder. Throttle valves on the cylinder set fill and discharge speeds. An inching/auto switch chooses single-shot or continuous cycling; an inching switch (foot/hand pedal) triggers each cycle in semi-auto mode. Air supply treatment unit (filter + regulator + oil atomizer) conditions the compressed air.

Processus de fonctionnement

1Material in the hopper feeds via a rotary disk valve into a stainless cartridge.

2A pneumatic cartridge cylinder draws the piston back to suck a measured volume from the hopper (rotary disk valve in suction position), then the rotary disk rotates to discharge position and the piston pushes the dose out through the discharge nozzle with anti-drip seal ring.

3Filling volume is set with a hand-wheel that positions the rear magnetic switch on the cartridge cylinder.

4Throttle valves on the cylinder set fill and discharge speeds.

5An inching/auto switch chooses single-shot or continuous cycling; an inching switch (foot/hand pedal) triggers each cycle in semi-auto mode.

6Air supply treatment unit (filter + regulator + oil atomizer) conditions the compressed air.

Caractéristiques techniques

Caractéristiques de la variante : SED-10JNG-P 4-head

Caractéristiques

Modèle

SED-10JNG-P

Cadence

10–20 cycles/min

Tension

220V 50Hz

Fluides et énergie

220 V 50 Hz; compressed air 0.4–0.6 MPa, ≥ 0.1 m³/min

Détails de conformité

Inner walls of main parts mirror-polished to Ra <= 0.2-0.4 um per GMP; rust- and corrosion-resistant. Standard CE-style safety devices: emergency stop, leakage protection.

Pression d’air

0.4-0.6 MPa (operating); regulator adjustable to 0.9 MPa

Dimensions

Longueur

970 mm

Largeur

450 mm

Hauteur

450 mm

Poids

34 kg

Emprise au sol

970 × 450 × 450 mm; net weight 34 kg

Matériaux

Matériaux en contact

SS304 standard (SS316 optional)

Matériaux du bâti

Stainless steel shell (SS304 standard)

Fonctionnement

Filling Heads

Caractéristiques physiques

Capacité de la trémie

80L L

Caractéristiques principales

Pneumatically-driven semi-automatic single-head horizontal filler

Filling volume 30-300 ml (factory standard) with +/-0.5% FS accuracy

Production capacity 10-20 cycles/min

Suitable for liquids and creams 20-2000 cP

Inching and automatic operation modes via selector switch

Hand-wheel + magnetic switch filling-volume regulation with locking screw

Throttle valves on cartridge cylinder for independent fill/discharge speed control

Anti-drip seal-ring discharge nozzle with changeable nose tip

Rotary disk valve metering with suction/discharge positions

Air supply treatment diad (filter + regulator + oil atomizer)

Mushroom-head emergency stop next to discharge nozzle

Stainless steel SS304 contact parts; SS316 customizable

Mirror-polished interior Ra <= 0.2-0.4 um for GMP compliance

Pneumatically driven — no electrical hazard at the filling zone

GMP-compliant: mirror-polished inner surfaces Ra ≤ 0.2–0.4 µm

Quick-release fittings (international standard universal snaps) for easy cleaning

Inching + automatic operation modes

Adjustable fill volume and speed within model range

Applications

Liquid and cream filling (20–2000 cP) in bottles, jars, tubes

Daily chemical products (shampoo, lotion, cream)

Food and beverage filling

Pharmaceutical liquid/cream dosing

Chemical liquid dispensing

Secteurs

Pharmaceutique

Daily chemical / personal care

Agroalimentaire et boissons

Chemical

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP (mirror-polished interior Ra <= 0.2-0.4 um per GMP requirements)

Nettoyage et entretien

Before startup and after each production run, clean all parts that come into contact with materials. Disassemble cartridge by loosening pressure screw; remove and clean piston and seal rings. Regularly drain water from air supply filter; check oil atomizer oil level (fill to 2/3 of cup).