Accueil / Équipements / Calibreur de granulés / Grinding Dry Cone Mill — SED-100ZL-W

SED-100ZL-W

Sur devis

SED-100ZL-W

SED · SED-100ZL-W · En vedette

SED-100ZL-W

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

Grinding Dry Cone Mill . Crushes agglomerated raw materials and dry non-conforming medicines into uniform granules per mesh size. Material is fed via hopper and gate valve into a conical work chamber where a rotary 316L

Délai de livraison

Sur devis

Cadence

10–100 kg/h

Fonctionnement

Material is fed via hopper; gate valve regulates flow into the conical chamber. A 316L cone-mill knife rotates at 300–2800 rpm creating vortex and centrifugal force that throws particles outward against a 316L screen. Shear between knife edge and screen breaks particles, which exit through the screen mesh. Particle size is set by screen mesh, knife-screen gap, and speed.

Processus de fonctionnement

1Material is fed via hopper; gate valve regulates flow into the conical chamber.

2A 316L cone-mill knife rotates at 300–2800 rpm creating vortex and centrifugal force that throws particles outward against a 316L screen.

3Shear between knife edge and screen breaks particles, which exit through the screen mesh.

4Particle size is set by screen mesh, knife-screen gap, and speed.

Caractéristiques techniques

Caractéristiques de la variante : SED-100ZL-W

Caractéristiques

Modèle

SED-100ZL-W

Cadence

10–100 kg/h

Tension

1PH/220V/50Hz (alt: 3PH/220V/60Hz per parameter table)

Fluides et énergie

1PH/220V/50Hz (primary); parameter table also lists 3PH/220V/60Hz. Motor 1.5 kW. Optional vacuum feeder requires compressed air.

Détails de conformité

Provides packing list and certificate of conformity for main equipment and purchased parts. Optional full validation suite: DQ/IQ/OQ/FAT/SAT, MOC, COC, calibration, sub-supplier certs.

Puissance

1.5 kW

Dimensions

Emprise au sol

Refer to drawing (not numerically specified in source).

Matériaux

Matériaux en contact

316L (feeding port, mill knife, screen, discharging port, drive shaft 2Cr13)

Matériaux du bâti

SUS304 (square-tube frame, electrical box)

Caractéristiques principales

Capacity 10–100 kg/h

Motor 1.5 kW with VFD speed control 300–2800 rpm

Standard 1.2 mm screen, interchangeable for varied granule sizes

316L product-contact parts (knife, screen, ports, hopper)

304 square-tube frame, 304 electrical box

4× 3-inch PU caster wheels for mobility

Schneider ATV-320 frequency converter

Schneider emergency stop; Siemens 5SY circuit breaker

Standard discharge height 650 mm (customisable)

Optional pneumatic vacuum feeder for closed-loop feeding

Patented shaft sealing — no lubrication oil leakage

No dead corners, no overheating, low dust, low noise

Easy to clean and move

316L wetted parts — pharma-grade

VFD speed control gives wide particle-size tunability

Mobile design with PU casters

Optional 2-year sealing-parts spare kit

Full validation documentation package available (DQ/IQ/OQ/FAT/SAT) bilingual EN/ZH

CE certificate available

Solves screen-wear scrap contamination issue

Applications

Crushing agglomerated raw materials

Dry milling of non-conforming medicines

Pharmaceutical granule sizing

Chemical / mineral granule sizing

Food powder de-clumping

Secteurs

Pharmaceutique

Chemical

Food

Mineral / fine-particulate

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

Nettoyage et entretien

316L surfaces with no retention dead corners. SOPs for operating, cleaning and maintenance available as documentation option.