Accueil / Équipements / Sécheur rotatif sous vide biconique (HZG) / SED-HZG Double-Cone Rotary Vacuum Dryer
SED-1000HZG-T
Sur devis
SED-1000HZG-T
SED · SED-1000HZG-T · En vedette
SED-1000HZG-T — SED-HZG Double-Cone Rotary Vacuum Dryer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-1000HZG-T Double-Cone Rotary Vacuum Dryer, 1000 L total vessel (working volume ≤500 L). Designed for mixing and drying of pharmaceutical powders, crystals, and granules under vacuum. Also used for solution concentrat
Choisir une variante (1)
Délai de livraison
Sur devis
Cadence
3–13 L (vessel volume)
Fonctionnement
Material is loaded into the double-cone vessel under vacuum. The vessel rotates slowly (3–13 rpm, with timed forward/reverse) so the material continuously tumbles and exposes fresh surface. The jacket is heated indirectly by thermal oil; vacuum (–0.09 MPa) lowers the boiling point so liquid evaporates at low temperature. Vapour is drawn off by a water-ring vacuum pump; condensate can be recovered with an optional recovery unit.
Processus de fonctionnement
1Material is loaded into the double-cone vessel under vacuum.
2The vessel rotates slowly (3–13 rpm, with timed forward/reverse) so the material continuously tumbles and exposes fresh surface.
3The jacket is heated indirectly by thermal oil; vacuum (–0.09 MPa) lowers the boiling point so liquid evaporates at low temperature.
4Vapour is drawn off by a water-ring vacuum pump; condensate can be recovered with an optional recovery unit.
Caractéristiques techniques
Caractéristiques de la variante : SED-1000HZG-T vessel 1000 L / working 500 L / heat area 4.6 m² / rotation 3–13 rpm / drive 5.5 kW / vacuum –0.09 MPa / jacket ≤0.3 MPa / height 2700 mm / thermal oil heater 18 kW + pump 1.5 kW / vacuum pump 5.5 kW
Caractéristiques
Modèle
SED-1000HZG-T
Cadence
3–13 L (vessel volume)
Fluides et énergie
Thermal oil heater 18 kW + circulation pump 1.5 kW (jacket heating); 5.5 kW VFD drive motor; 5.5 kW vacuum pump; cooling water for vacuum-pump seal water tank; condenser cooling for vapour recovery (if equipped). Total electrical ≈30.5 kW.
Détails de conformité
Pharma-grade SS304 mirror-polished contact surfaces; full set of national-standard components; 1-year warranty.
Puissance
30.5 kW
Pression d’air
Internal vacuum -0.09 MPa; jacket pressure ≤0.3 MPa
Dimensions
Hauteur
2700 mm
Emprise au sol
Main unit height 2700 mm; overall footprint determined by machine configuration (not separately stated in spec)
Matériaux
Matériaux en contact
SS304 mirror-polished 8 mm (inner shell); SS304 (vacuum hood; buffer tank; vacuum-pump water tank; control box; feed port Φ400; discharge butterfly valve Φ200)
Matériaux du bâti
Q235A 8 mm (jacket); SS304 brushed 2 mm (outer cover); 10# channel steel (frame); SS 1.5 mm (frame cladding); glass fibre 60 mm (insulation)
Caractéristiques principales
Total vessel 1000 L; working volume ≤500 L
Heating area 4.6 m²; jacket pressure ≤0.3 MPa
Vessel vacuum –0.09 MPa
Rotation 3–13 rpm with VFD; forward/reverse with timed reversal
Drive motor 5.5 kW VFD
Thermal oil heater 18 kW + 1.5 kW oil circulation pump
5.5 kW water-ring vacuum pump (with SS304 water tank)
Inner vessel SS304 mirror-polished 8 mm
Q235A jacket 8 mm; SS304 outer 2 mm brushed
Glass-fibre insulation 60 mm
SS Φ400 feed port with auto-suction inlet; SS Φ200 butterfly discharge valve at 1 m clearance
Main unit height 2700 mm
WPA135 reducer (Changzhou); chains, vacuum gauge, rotary joints (Changzhou / Tengzhou)
Low-temperature drying preserves heat-sensitive APIs
Achieves <0.05% residual moisture
Closed system — no contamination, dust, or solvent emissions
Mixing and drying in one batch operation
Indirect jacket heating + vacuum dramatically cuts drying time vs atmospheric ovens
Optional vapour recovery for solvent reuse
Applications
Pharmaceutical API drying (heat-sensitive)
Crystallised intermediate drying
Powder/granule mixing and drying
Solution concentration
Material sterilisation / disinfection by heat under vacuum
Secteurs
Pharmaceutique
Chemical
Food
Metallurgy
Building materials
Marques des composants
Drive motor 5.5 kW VFD: Jiangsu
Reducer WPA135: Changzhou
Discharge butterfly valve: Changzhou
Vacuum gauge / chains / belts: Changzhou (national standard)
Rotary joints: Tengzhou, Shandong
Bearing seats: Changzhou
Thermal oil heater 18 kW + circulation pump 1.5 kW: Changzhou
Vacuum pump 5.5 kW (water-ring) + SS304 seal-water tank
Temperature controller / control box: Chint
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial