Accueil / Équipements / Aspirateur / Aspirateur

SED-1.1XCQ-G

Sur devis

SED-1.1XCQ-G

SED · SED-1.1XCQ-G · 1 unités vendues

SED-1.1XCQ-G — Aspirateur

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1.1XCQ-G is a 1.1 kW industrial vacuum cleaner / dust collector for general dust control in pharmaceutical and industrial production environments. Compact wheeled cabinet with all-metal body (304 stainless top half,

DQ / IQ / OQ / PQ design-install-operate-performance qualification protocolsFAT and SAT acceptance test protocols

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

290–300 m3/h (suction airflow)

Fonctionnement

A 1.1 kW turbine-sealed motor (overload/overheat protected, capable of 24 h continuous duty) drives a high-airflow blower that creates 200-220 mbar vacuum at the dust suction port (40 mm standard inlet). Dust-laden air enters via the hose, passes through the 30 L dust-collection drum, then through the 2.5 m2 star-shaped polyester-fiber needled filter (or optional high-efficiency cartridge); cleaned air exits through the silent damping device. Periodically the operator shakes the filter manually (or pulses with optional auto-cleaning) to dislodge trapped dust into the drum. A pressure-relief device on certain variants automatically vents excessive negative pressure.

Processus de fonctionnement

1A 1.1 kW turbine-sealed motor (overload/overheat protected, capable of 24 h continuous duty) drives a high-airflow blower that creates 200-220 mbar vacuum at the dust suction port (40 mm standard inlet).

2Dust-laden air enters via the hose, passes through the 30 L dust-collection drum, then through the 2.5 m2 star-shaped polyester-fiber needled filter (or optional high-efficiency cartridge); cleaned air exits through the silent damping device.

3Periodically the operator shakes the filter manually (or pulses with optional auto-cleaning) to dislodge trapped dust into the drum.

4A pressure-relief device on certain variants automatically vents excessive negative pressure.

Caractéristiques techniques

Caractéristiques de la variante : SED-1 1.1 kW industrial vacuum / dust collector with full validation package (this model)

Caractéristiques

Modèle

SED-1.1XCQ-G

Cadence

290–300 m3/h (suction airflow)

Tension

Three-phase 380V (or single-phase 220V on request, 50/60Hz)

Fluides et énergie

Power supply: three-phase 380V (default) or single-phase 220V (custom, extra cost); 50/60 Hz; 1.1 kW. Reliable earth ground required (also a static-discharge ground chain is included). Standard hose 40 mm ID; D40/D50/D60 accessory sets available.

Détails de conformité

Provides full validation package (DQ design, IQ install, OQ operate, PQ performance, plus FAT/SAT) for pharma users; turbine-sealed motor for clean exhaust; overload + overheat motor protection; pressure-relief device on select models.

Puissance

1.1 kW

Pression d’air

Vacuum 200-220 mbar

Dimensions

Longueur

500 mm

Largeur

450 mm

Hauteur

1200 mm

Poids

58 kg

Emprise au sol

Approx. 500 x 450 mm machine footprint, 1200 mm height; 58 kg net. Wheeled mobile unit — roll into position next to source equipment.

Matériaux

Matériaux en contact

304 stainless-steel upper section; star-shaped polyester-fiber needled filter (optional high-efficiency cartridge); 30 L stainless / coated-steel dust-collection drum

Matériaux du bâti

201 stainless-steel cabinet and handle; 304 stainless-steel upper assembly; ABS hose connector; silent castor wheels; 5 m power cord

Caractéristiques principales

Industrial dust collector for pharma/general production

Power 1.1 kW

Suction airflow 290-300 m3/h

Vacuum 200-220 mbar

30 L dust-collection drum

Filter area 2.5 m2 (20,000 cm2) star-shaped polyester-fiber needled (high-efficiency cartridge optional)

Filter cleaning: manual shake (standard), back-blow / electronic cleaning options

Turbine-sealed motor — 24 h continuous duty capability

Overload + overheat motor protection

Pressure-relief device (some models)

All-metal body: 304 SS upper, 201 SS cabinet/handle

Silent castor wheels for easy positioning

Standard inlet 40 mm; D40/D50/D60 accessory caliber options

5 m power cord

Operating noise 62-66 dB

Compact 500 x 450 x 1200 mm cabinet, 58 kg

DQ/IQ/OQ/PQ + FAT + SAT validation package available

Ready-to-validate: ships with full IQ/OQ/PQ/DQ + FAT/SAT documentation

Turbine-sealed motor designed for 24 h continuous operation (vs. typical 1-2 h shop-vac duty)

Quiet (62-66 dB) for production-floor placement

Stainless construction (304/201) survives pharma cleaning regimens

Modular accessory set (D40/D50/D60) adapts to any equipment fitting

Big 2.5 m2 filter area maintains high suction over long runs

Available in 3-phase or single-phase variants

Static-discharge grounding chain prevents charge buildup with powders

Applications

Dust capture at tablet presses

Dust capture at granulators and crushers

Dust capture at counting machines

Dust capture at capsule polishers

General production-floor dust collection in pharma/food/chem plants

Powder-spill cleanup in packaging suites

Secteurs

Fabrication pharmaceutique

Health products / nutraceuticals

Food processing

Chemical and ceramics

Electronics / battery

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

DQ / IQ / OQ / PQ design-install-operate-performance qualification protocols

FAT and SAT acceptance test protocols

Nettoyage et entretien

Manual shake the filter every shift to dislodge dust; replace polyester filter when collection drops noticeably. Empty the 30 L dust drum regularly. Verify ground chain contacts the floor and machine ground wire is connected (prevents static buildup). Power off and unplug before cleaning the filter or doing any maintenance. Do not vacuum wet dust, flammable / explosive / corrosive / radioactive substances, surface temp must be <=60 C.