Showroom à Ontario, Californie · Assistance à confirmer pour votre destination
Accueil / Équipements / Mélangeur sans gravité / Zero-Gravity Mixer (Twin-Shaft Paddle Mixer)
SED-0.6WZL-B
Sur devis
SED-0.6WZL-B
SED · SED-0.6WZL-B · En vedette

SED-0.6WZL-B — Zero-Gravity Mixer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.6WZL-B Zero-Gravity Mixer (Twin-Shaft Paddle Mixer / Anti-Gravity Mixer). Effective volume 0.6 m³; maximum batch output 600 kg. Two parallel counter-rotating shafts carry paddles set at preset angles; the paddle-ti

Choisir une variante (9)
Délai de livraison
Sur devis
Cadence
600 kg/batch

Fonctionnement

Twin-shaft counter-rotating paddle mixing in a horizontal trough with a saddle-shaped (W-section) cross-section. Two parallel shafts spin in opposite directions at 43 rpm — above the critical speed at which paddle-tip linear velocity equals gravitational acceleration holding material to the trough wall. At that speed material is launched to the parabolic apex (zero-gravity point) and becomes effectively weightless, enabling rapid, uniform intermingling of components with widely differing particle sizes and bulk densities. The overlapping paddle geometry simultaneously generates gentle shear, breaking loosely agglomerated lumps without attrition. The batch is complete in 1–3 min for typical dry blends.

Processus de fonctionnement
1Twin-shaft counter-rotating paddle mixing in a horizontal trough with a saddle-shaped (W-section) cross-section.
2Two parallel shafts spin in opposite directions at 43 rpm — above the critical speed at which paddle-tip linear velocity equals gravitational acceleration holding material to the trough wall.
3At that speed material is launched to the parabolic apex (zero-gravity point) and becomes effectively weightless, enabling rapid, uniform intermingling of components with widely differing particle sizes and bulk densities.
4The overlapping paddle geometry simultaneously generates gentle shear, breaking loosely agglomerated lumps without attrition.
5The batch is complete in 1–3 min for typical dry blends.

Caractéristiques techniques

Caractéristiques de la variante : SED-0 .12WZL-B (0.12 m³

Caractéristiques

Modèle
SED-0.6WZL-B
Cadence
600 kg/batch
Fluides et énergie
Electricity for 11 kW drive motor. Voltage not specified in the source spec; confirm with supplier.
Détails de conformité
No material grade, certifications, or detailed compliance information provided in the source document; specification sheet is a brief overview and parameter table only.
Puissance
11 kW

Dimensions

Longueur
1800 mm
Largeur
1850 mm
Hauteur
1500 mm
Poids
1200 kg
Emprise au sol
Footprint 1800 (L) × 1850 (W) × 1500 (H) mm; weight approximately 1200 kg. Install on a level, load-bearing floor.

Caractéristiques principales

Effective volume 0.6 m³; maximum batch output 600 kg
Twin parallel counter-rotating shafts with paddles at preset angles
Rotation 43 rpm — above critical (zero-gravity) speed for weightless blending
Gentle shear breaks loose lumps without damaging fragile particles
Mixes powders, granules, small chunks, and fibers with equal efficiency
Drive power 11 kW; overall dimensions 1800 × 1850 × 1500 mm; weight 1200 kg
Fast, uniform mixing of dry solids with very different particle sizes/densities — typical 1–3 min vs. 15–30 min for a ribbon blender
Gentle on fragile granules, crystals, fibers, and soft chunks
Twin-shaft paddle design eliminates density stratification common in slower mixers
Broad series (0.12 to 9 m³) enables seamless scale-up from lab to production

Applications

Mixing dry powders and granules
Blending components with widely different particle sizes and densities
Gentle mixing of fibers and small chunks
Pre-tableting blend in pharma solid-dosage manufacturing
Feed and food premix mixing
Chemical and ceramic powder mixing

Secteurs

Pharmaceutical solid-dosage manufacturing
Animal feed
Food and food premix
Chemical industry
Ceramics and minerals
Cosmetics powders
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe

Documentation

Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial
SED
WhatsApp · Ventes SED
Contact commercial · WhatsApp
→