Accueil / Équipements / Sécheur continu à lit fluidisé vibrant ZGF (avec refroidissement LZGF / granulation par pulvérisation PZGF) / Linear Vibrating Fluidized Bed Cooler — SED-0.3-6ZGF-T

SED-0.3-6ZGF-T

Sur devis

SED-0.3-6ZGF-T

SED · SED-0.3-6ZGF-T · En vedette

SED-0.3-6ZGF-T

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.3-6ZGF-T is a 1.8 m² linear vibrating fluidized bed cooler sized for 150–300 kg/h of milk powder, cooling from 70–85 °C inlet to 20–25 °C outlet. Driven by two 1.5 kW vibration motors and a 7.5 kW SS304 blower. Ove

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

150–300 kg/h (milk powder reference)

Fonctionnement

Vibration motors generate excitation that bounces material across an SS304 reinforced-bottom perforated bed plate. Cool ambient air is filtered (S=3 m² polyester non-woven filter in stainless body), delivered by the 7.5 kW blower into the lower-box plenum, distributes evenly through the bed and fluidises the material for direct cool-mass transfer. Cooled product exits via the discharge port; warm exhaust air is routed back to the spray dryer (typical milk-powder line integration).

Processus de fonctionnement

1Vibration motors generate excitation that bounces material across an SS304 reinforced-bottom perforated bed plate.

2Cool ambient air is filtered (S=3 m² polyester non-woven filter in stainless body), delivered by the 7.5 kW blower into the lower-box plenum, distributes evenly through the bed and fluidises the material for direct cool-mass transfer.

3Cooled product exits via the discharge port; warm exhaust air is routed back to the spray dryer (typical milk-powder line integration).

Caractéristiques techniques

Caractéristiques de la variante : SED-0 1.8 m² vibrating fluidized bed cooler (sister: SED-0.3-3ZGF-T 0.9 m² dryer)

Caractéristiques

Modèle

SED-0.3-6ZGF-T

Cadence

150–300 kg/h (milk powder reference)

Fluides et énergie

Electric power ~10 kWh/h (7.5 kW blower + 2×1.5 kW vibration motors + control); cool ambient air supply.

Détails de conformité

All product-contact surfaces SS304, suitable for dairy and food applications. No specific certification standard cited in source.

Puissance

10 kW

Dimensions

Longueur

6000 mm

Largeur

300 mm

Hauteur

2800 mm

Poids

1500 kg

Emprise au sol

Overall L 6,000 × W 300 × H 2,800 mm, weight 1,500 kg. Long-bed format designed for spray-dryer line integration.

Matériaux

Matériaux en contact

SS304 stainless steel (bed plate, lower box, upper cover, ducting, blower housing)

Matériaux du bâti

SS304 stainless steel / rubber (16 shock absorbers φ80) / canvas (soft connections) / carbon steel (reinforcement flanges) / silicone (sealing pads)

Caractéristiques principales

Cooling area 1.8 m² (bottom-reinforced bed plate)

Capacity 150–300 kg/h (milk-powder reference)

Inlet temperature 70–85 °C, outlet temperature 20–25 °C

Two vibration motors 1.5 kW each (3 kW total)

7.5 kW SS304 blower

S=3 m² polyester non-woven air filter (stainless body)

16 rubber shock absorbers φ80

DN320 air-supply ducting and DN500 exhaust ducting (SS304 / 2 mm)

Two φ120 tempered-glass sight glasses

DN400 cleaning port

Inspection door with silicone sealing pads

Soft canvas connections at inlet and outlet for vibration isolation

Energy consumption ~10 kWh/h

Overall dimensions L 6,000 × W 300 × H 2,800 mm; weight 1,500 kg

Optimised for spray-dryer milk-powder lines — exhaust integrates back to the dryer for energy recovery

Stable, low-noise vibration drive — high cooling efficiency

30%+ energy savings vs conventional cooling devices via vibration-enhanced fluidisation

Adjustable bed thickness, transport speed and amplitude (stepless within design range)

Fully enclosed construction prevents cross-contamination

Reinforced bottom mesh plate for long service life

Suitable for fragile or irregular particles

Applications

Cooling of milk powder after spray drying

Cooling of food and beverage spray-dried powders

Cooling of pharmaceutical and chemical granules

Cooling of irregular or fragile particle materials

Secteurs

Dairy and milk-powder manufacturing

Food and beverage processing

Fabrication pharmaceutique

Fine chemicals

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

DN400 cleaning port and inspection door allow in-place chamber cleaning. Sight glasses and bed mesh are removable. SS304 wetted surfaces. Specific CIP protocol not described in source.