Accueil / Équipements / Sécheur par atomisation de laboratoire/paillasse (≤3 kg/h) / Dryer – Spray Dryer – SED-PG Centrifugal Spray Dryer

SED-0.2PG1-Q

Sur devis

SED-0.2PG1-Q

SED · SED-0.2PG1-Q · En vedette

SED-0.2PG1-Q — SED-PG Centrifugal Spray Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-0.2PG1-Q is a compact benchtop spray dryer with a maximum feed rate of 2000 mL/h, using two-fluid (compressed-air) atomisation. All spray, drying and collection sections are SS316 stainless steel. Designed for univer

Choisir une variante (1)

Délai de livraison

Sur devis

Cadence

1500–2000 mL/h max feed rate

Fonctionnement

Liquid feed is delivered by a peristaltic pump to a two-fluid nozzle where compressed air (2–3 Bar, built-in oil-free compressor) atomises it into a fine mist. The mist contacts hot air (inlet 30–300 °C) inside the drying chamber; moisture evaporates in 1.0–1.5 s, leaving dry particles, which are separated in a cyclone and collected. An auto needle de-clog mechanism maintains clear nozzle flow during long runs.

Processus de fonctionnement

1Liquid feed is delivered by a peristaltic pump to a two-fluid nozzle where compressed air (2–3 Bar, built-in oil-free compressor) atomises it into a fine mist.

2The mist contacts hot air (inlet 30–300 °C) inside the drying chamber; moisture evaporates in 1.0–1.5 s, leaving dry particles, which are separated in a cyclone and collected.

3An auto needle de-clog mechanism maintains clear nozzle flow during long runs.

Caractéristiques techniques

Caractéristiques de la variante : SED-0 small spray dryer

Caractéristiques

Modèle

SED-0.2PG1-Q

Cadence

1500–2000 mL/h max feed rate

Tension

AC 220V single-phase grounded (heater 4 kW)

Fluides et énergie

AC 220 V single-phase grounded supply (total 5.1 kW); built-in oil-free compressor — no external air supply required.

Détails de conformité

SS316 wetted parts are compatible with pharmaceutical and food applications. No specific certification standard cited in source.

Puissance

5.1 kW

Pression d’air

Compressed air working pressure 2–3 Bar (built-in compressor)

Dimensions

Longueur

650 mm

Largeur

500 mm

Hauteur

1200 mm

Poids

125 kg

Emprise au sol

1200 mm (H) × 650 mm (L) × 500 mm (W); benchtop unit, approximately 125 kg.

Matériaux

Matériaux en contact

SS316 stainless steel (atomiser, drying chamber, collection section)

Matériaux du bâti

SS316 stainless steel (spray, drying and collection sections)

Caractéristiques principales

Maximum feed rate 2000 mL/h; minimum 50 mL

Inlet temperature 30–300 °C; outlet 30–150 °C; control accuracy ±1 °C

Evaporation rate 1500–2000 mL/h

Two-fluid atomiser, high-precision SS316, nozzle orifice 1.00 mm

Spray, drying and collection sections in SS316

Average drying time 1.0–1.5 s

Auto needle de-clog with adjustable frequency

Peristaltic feed pump with adjustable flow

Colour touch-screen HMI (Chinese/English), PID temperature control

Built-in oil-free compressor (<50 dB), 0.55 kW, 4.2 m³/h

Heater 4 kW AC 220 V single-phase grounded

Blower 0.55 kW, max 5.6 m³/min, max 1020 Pa

Working compressed-air pressure 2–3 Bar

Safety interlock: heater cannot start unless blower is running

≥95% of product in the same particle size distribution

Compact benchtop footprint — fits standard lab and R&D bench

Built-in oil-free compressor — no external compressed-air supply required

Auto-clearing nozzle — runs unattended for long batches

Bilingual touch-screen HMI (Chinese/English)

Heat-sensitive friendly: instantaneous heating preserves bioactivity

Applications

Spray drying of pharmaceutical APIs and intermediates

Spray drying of biologics, enzymes and biopesticides

Spray drying of food flavours, colours, milk and egg products

Spray drying of plant and vegetable extracts

Spray drying of polymers, resins, dyes, oxides, ceramics and blood products

Secteurs

Pharmaceutical R&D and laboratory

Food and beverage R&D

Universities and research institutes

Biotech, enzyme and biopesticide development

Specialty chemicals and ceramics R&D

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Quick-clamp connections (clamps 1, 2, 3) on the collection tube, drying chamber and feed line allow easy disassembly for cleaning. All product-contact surfaces are SS316. No specific CIP cycle described in source.