Inicio / Equipos / Prensa de tabletas de alta velocidad — grande (30–45 estaciones) / High-Speed Rotary Tablet Press
SED-660-45GY-D
Consultar
SED-660-45GY-D
SED · SED-660-45GY-D · Destacado
SED-660-45GY-D — High-Speed Rotary Tablet Press
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
The SED-660-45GY-D is a high-speed automatic rotary tablet press with 45 stations of ISO-D tooling and double discharge, capable of pressing up to 405,000 tablets per hour at a maximum punch-disk speed of 75 rpm. It supp
Elegir variante (2)
Plazo de entrega
Consultar
Capacidad de producción
405000 tablets/hour
Funcionamiento
Granules or powder enter two forced feeders at the top; impellers fill the dies on the rotating punch disk under controlled depth. The 45 sets of upper and lower punches are guided by closed cam tracks, twice per rotation: filling, pre-press (eliminates trapped air, pre-shapes), main press (final shaping at up to 100 kN with sensor feedback), and discharge. Each rotation produces 90 tablets (45 stations × 2 discharges). A hydraulic accumulator system buffers main-press pressure for stability and provides overload protection. A platen seals the die during the powder-throw zone; a scraper recycles excess powder. Defective tablets are diverted via a corner-solenoid scrap plate to a separate channel.
Proceso de funcionamiento
1Granules or powder enter two forced feeders at the top; impellers fill the dies on the rotating punch disk under controlled depth.
2The 45 sets of upper and lower punches are guided by closed cam tracks, twice per rotation: filling, pre-press (eliminates trapped air, pre-shapes), main press (final shaping at up to 100 kN with sensor feedback), and discharge.
3Each rotation produces 90 tablets (45 stations × 2 discharges).
4A hydraulic accumulator system buffers main-press pressure for stability and provides overload protection.
5A platen seals the die during the powder-throw zone; a scraper recycles excess powder.
6Defective tablets are diverted via a corner-solenoid scrap plate to a separate channel.
Especificaciones técnicas
Especificaciones de la variante: SED-660-45GY-D (this model): 45-station
Especificaciones
Modelo
SED-660-45GY-D
Capacidad de producción
405000 tablets/hour
Suministros
Main motor 11 kW via VFD inverter (3-phase). Industrial-grade earthing required. Industrial dust-collection pipeline connection. Three lubricants: No. 00 lithium grease, N46 engine oil for two oil systems, No. 460 worm-gear oil, N46 hydraulic oil. Operating temperature 0–40°C, no corrosive air, no conductive dust, no strong magnetic fields, no excessive vibration.
Detalles de conformidad
Designed and built to GMP standard. Twin-chamber sealed construction prevents cross-contamination between purification room, press chamber, and transmission room. Manufactured by SED Pharma Inc., 720 E Carnegie Dr, Suite 240, San Bernardino CA 92408 (USA). User Manual version 2024.
Potencia
11 kW
Dimensiones
Longitud
1704 mm
Anchura
1380 mm
Altura
1926 mm
Peso
4056 kg
Superficie de instalación
1704 × 1380 mm (~2.4 m²) plus minimum 1 m clearance for service. Floor must take 4056 kg machine weight; lift only by forklift at center of gravity, max tilt 25° during handling.
Materiales
Materiales en contacto
Stainless steel pressing chamber; non-metallic upper/lower parallel guide rails to reduce noise; PTFE bushing on material-tank-to-feeder connection
Materiales del cuerpo
Solid four-column two-layer frame (base plate, support legs, machine base, columns, cross) — high-rigidity steel structure with stainless steel cladding and four glass doors on the press chamber
Características principales
45-station ISO-D tooling with double discharge — 2 tablets per station per revolution
Up to 405,000 tablets/hour at 75 rpm
Maximum main pressure 100 kN, pre-pressure 20 kN
Variable-frequency 11 kW main motor with constant-torque low-speed start
Two forced feeders with sight windows; recyclable powder via collecting scraper
Hydraulic overload protection with two accumulators (1 MPa + 2.5 MPa setpoints)
Three centralized lubrication systems (grease, intermittent oil, continuous oil) PLC-controlled
Sealed press chamber + sealed transmission chamber prevents cross-contamination
Servo-controlled filling depth adjustment for stable tablet weight
Touch-screen HMI with main/pre-pressure display and scrap/sampling control
Pressure-sensor feedback on main press converts to voltage for PLC monitoring
Integrated dust collection on middle and lower punch disks
Max tablet diameter: 25 mm (round); max irregular long-axis: 25 mm
Max filling depth: 20 mm; tablet thickness: 0.5–8 mm
Main machine: 1704 × 1380 × 1926 mm, 4056 kg; controller: 750 × 550 × 1750 mm, 240 kg
Highest throughput in SED's ISO-D rotary press line — >400K tablets/hour
Double-discharge design produces 2 tablets per station per revolution, doubling effective rate
Worm-gear-driven lower press wheel pressurization is more synchronous than competitors' eccentric-shaft method — less noise, less powder spillage, tighter weight tolerance
Sealed twin-chamber design meets the strictest GMP cleanroom requirements
Servo filling adjustment delivers tighter tablet-weight CV than mechanical-only filling
Variable-frequency drive provides constant low-speed torque for sticky formulations
ISO-D tooling is interchangeable with other ISO-D presses, reducing tool inventory cost
Aplicaciones
High-volume pharmaceutical tablet pressing (round, oval, caplets, multi-layer)
Engraved or double-sided positioning tablets
Chemical tablet pressing (catalysts, detergents)
Food tablet pressing (sweeteners, supplements)
Electronic component tablets
Veterinary medicine tablets
Customized salt tablets (confirmed per quotation)
Sectores
Pharmaceutical (innovator and generic tablet manufacturing)
Chemical
Food and nutraceutical
Electronics
Veterinario
Marcas de componentes
Variable-frequency main motor 11 kW with inverter
Worm-gearbox reducer using oil No. 460
Hydraulic system using N46 hydraulic oil with 2 accumulators + relief valve
PLC + touch-screen control
Servo motor for filling-depth adjustment
Pressure transmitter on main press
Electric grease pump using No. 00 lithium grease
Electric oil pump using N46 engine oil for intermittent and continuous lubrication
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Limpieza y mantenimiento
Pre-production: clean dies, scrapers, feeder bottom; check punch and die wear, polish minor scratches with waterproof sandpaper. Post-shift: full vacuum of dust collector, wipe sealed chambers, inspect blocking-rod position, clean Plexiglas discharge cover. Change-over batch cleaning of feeder, dies, and platen mandatory. Replace continuous-lubrication oil every 6 months; clean oil filter every 3 months.
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial