SED-400BY-D — Recubridora sencilla
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-400BY-D Simple Sugar Coating Machine is a small benchtop pan-coater for tablets, pills and granules. Suitable for coatings that have to be added by hand (cannot be sprayed). The 400 mm clockwise-rotating coating pan
Funcionamiento
Tablets / pills / granules are loaded into the 400 mm sugar-coating pan. A single-direction low-speed motor (transmitted via belt + worm-gear reducer) rotates the pan clockwise at 0-46/50 rpm so that the batch tumbles and rubs in an optimal flow curve. Operator manually adds syrup / coating mix in batches. Simultaneously a 60 W blower forces 500 W heated hot air (~50 deg C) into the pan via a duct so the moisture in the coating evaporates rapidly, producing uniform, glossy sugar-coated tablets. Pan elevation 15-45 deg adjustable to match material flow.
Especificaciones técnicas
Especificaciones
Dimensiones
Materiales
Electricidad
Funcionamiento
Características físicas
Características principales
Aplicaciones
Sectores
Limpieza y mantenimiento
Wipe outer surfaces and inside the machine with a clean wet towel before each shift; wipe the coating pan first with a clean towel and then with 75 percent industrial alcohol for sterilisation. After post-shift cleaning use the same procedure. After each batch / when stopping for long periods, remove the rotating pan to clean and rinse out remaining powder; if the pan is copper, oil its surface to prevent oxidation. Replace gearbox lubricating oil (HJ-10) every 6 months and grease (ZG-2) on rolling bearings every 6 months. Dust the electrical control cabinet weekly.