SED-1250LXJ-A
Consultar
SED-1250LXJ-A
SED · SED-1250LXJ-A · Destacado
SED-1250LXJ-A — Centrífuga
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
SED-1250LXJ-A Flat-Plate Type Automatic Scraper Lower-Discharge Centrifuge is a heavy-duty pharmaceutical/chemical filter centrifuge with a 1250 mm × 630 mm drum (400 L volume, 530 kg max load). It runs at up to 1000 rpm
Plazo de entrega
Consultar
Capacidad de producción
Contáctenos
Funcionamiento
Slurry is fed through a DN50 feed pipe into a rotating distributor that spreads material evenly on the inner surface of the 1250 mm 316L drum. The drum is spun by a 22 kW vertical motor via belt drive, with VFD start and dynamic braking, reaching 1000 rpm (separation factor 700). Mother liquor passes through the perforated drum and is discharged via a DN125 outlet at the bottom. After centrifugation the drum decelerates and a hydraulic scraper (driven by a 1.5 kW oil pump at 3 MPa) descends into the cake, scraping it through a bottom discharge hole into a φ420 collection hopper. Cake washing uses a DN25 wash pipe; nitrogen blanketing is supplied via a φ16 line for inertion.
Proceso de funcionamiento
1Slurry is fed through a DN50 feed pipe into a rotating distributor that spreads material evenly on the inner surface of the 1250 mm 316L drum.
2The drum is spun by a 22 kW vertical motor via belt drive, with VFD start and dynamic braking, reaching 1000 rpm (separation factor 700).
3Mother liquor passes through the perforated drum and is discharged via a DN125 outlet at the bottom.
4After centrifugation the drum decelerates and a hydraulic scraper (driven by a 1.5 kW oil pump at 3 MPa) descends into the cake, scraping it through a bottom discharge hole into a φ420 collection hopper.
5Cake washing uses a DN25 wash pipe; nitrogen blanketing is supplied via a φ16 line for inertion.
Especificaciones técnicas
Especificaciones de la variante: SED-1250LXJ-A
Especificaciones
Modelo
SED-1250LXJ-A
Tensión
3-phase / 50 Hz / 380 V
Suministros
3-phase 50 Hz / 380 V power: main motor 22 kW (IP54), cloth/distributor motor 2.2 kW, oil-pump motor 1.5 kW. Compressed air 0.4–0.6 MPa supplied by customer. Hydraulic station 3 MPa working pressure. Optional nitrogen via φ16 quick-connect for inert blanketing. DN125 mother-liquor drain, DN50 feed, DN25 wash connections.
Detalles de conformidad
Designed and manufactured to JB/T10769.2-2007. 100 % NDT inspection of drum welds, strict dynamic balance test. Motor IP54 (main) and IP55 (on-site operation box). Includes scraper mechanical limit, process interlocking, emergency shutdown, grounding, open-cover protection, vibration protection, fault detection/alarm, and motor overload/overheat protection.
Potencia
25.7 kW
Presión de aire
0.4–0.6 MPa (compressed air, supplied by customer); hydraulic system 3 MPa
Dimensiones
Longitud
2300 mm
Anchura
1700 mm
Altura
2400 mm
Peso
5000 kg
Superficie de instalación
2300 × 1700 mm equipment footprint, 2400 mm height. Floor must support ≈5 t machine weight; bottom plate 60 mm thick. Provide ≥1 m clearance for hydraulic-station and pneumatic-box access.
Materiales
Materiales en contacto
316L stainless steel (drum liner 12 mm; basket bottom cast steel lined with 2 mm 316L; bearing seat lined with 2 mm 316L; shell 5 mm 316L with 25 mm 316L flange; cover 8 mm 316L with 25 mm 316L flange; centrifuge plate Q235A carbon steel 60 mm lined with 2 mm 316L on contact face; scraper bar / lift cylinder contact parts 316L; feed/wash/nitrogen and drain pipes 316L; collection hopper 316L; distributor cone 316L; level-detector pendulum 316L); fluorine rubber seals
Materiales del cuerpo
316L stainless steel for shell, cover and flanges; Q235A carbon steel base plate (60 mm) lined; 304 stainless steel exposed surfaces of scraper device, plate top, motor shutter cover; carbon-steel sprayed main control cabinet
Características principales
1250 mm × 630 mm drum, 400 L volume
Maximum load 530 kg per batch
Maximum drum speed 1000 rpm, separation factor 700
Hydraulic scraper bottom discharge (auto)
All material-contact parts 316L stainless steel
Hydraulic flip-open cover with quick-snap lock, fluorine-rubber seal
Drum welds 100 % NDT-inspected and dynamically balanced
No drum reinforcement hoop — fewer hygiene dead corners
High-viscosity liquid elastic damping (>95 % vibration isolation)
Four-point support, drum rotates clockwise top-down
Working temperature -10 to 70 °C, pressure 0–0.05 MPa
Process interlocking, scraper limit, e-stop, ground, open-cover, vibration, fault-alarm and motor overload protection
Noise ≤85 dBA at 1.0 m
Compliant with JB/T10769.2-2007 design and manufacturing standards
Sealing surface above drum keeps process liquid off the seal — long ring life, no leakage
Hydraulic flip-up cover gives full top access for cleaning and inspection
Maintenance-free oil supply built into main bearing housing
Self-cleaning rotating distributor handles even poorly-flowing materials
Carbon-steel sprayed main control cabinet with INVT inverter, Xinjie PLC + HMI
Aplicaciones
Solid–liquid separation of crystalline pharmaceutical APIs
Filter cake washing in fine-chemical processes
Dewatering of granular intermediates
Nitrogen-blanketed centrifugation of flammable/oxygen-sensitive materials
Sectores
Pharmaceutical / API manufacturing
Fine chemicals
Specialty / agrochemical synthesis
Food and starch processing
Marcas de componentes
INVT main inverter (22 kW)
INVT cloth/distributor inverter (2.2 kW)
Xinjie PLC and touch screen
Tracy low-voltage electrical components
Profitable main and distributor motors
Wuxi Houde vibration sensor
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Conformidad
JB/T10769.2-2007 (design and manufacture standard)
Limpieza y mantenimiento
Hydraulic flip-up cover provides full access for top cleaning. Wash via integrated DN25 washing pipe; rinse mother-liquor through DN125 outlet. Drum has no reinforcement hoop, minimising hygiene dead corners. All material-contact connections smooth with rounded-corner welds.
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial