SED-5ZSJ-T — Whirlpool Pump Type
Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English
SED-5ZSJ-T is an electric (whirlpool-pump) vacuum powder feeder that pneumatically conveys 5000 kg/h of powder/granule (flour-equivalent over 4 m) from drums/IBCs into mixers, reactors, hoppers, tablet presses, packing m
Funktionsweise
Step 1: whirlpool pump starts and creates vacuum in the hopper. Step 2: reversing valve connects pump to hopper; unload door closes; vacuum draws material through the suction tube. Step 3: material is conveyed to the hopper through the feed entry while filters separate material from air. Step 4: reversing valve switches; cylinder opens the unload door; material drops into the receiving device. Step 5: back-blow system fires compressed air through the filters to dislodge fines, restoring filter capacity for the next cycle. A level meter on the receiving device automatically pauses or resumes cycling.
Technische Daten
Technische Daten
Abmessungen
Werkstoffe
Komponenten
Elektrik
Betrieb
Physikalische Angaben
Wesentliche Merkmale
Anwendungen
Branchen
Konformität
Reinigung und Wartung
Open clip and remove hopper cover (cover/air container is no-clean side). Remove filter cartridges; blow powder off with compressed air; clean with warm water (<80 °C) and soft brush only (hard brush forbidden — it harms filter accuracy); blow with compressed air until filters are transparent; air-dry or oven-dry below 50 °C. Open clips and rinse hopper with clean water. Reassemble. Cleaning required at every batch/material change. Periodic back-blow keeps film-covered filters at full capacity.