Ausstellung in Ontario, Kalifornien · Support am Zielort anfragen
Startseite / Maschinen / Stickstoffgeneratoren / Nitrogen Generator
SED-500DQF-F
Auf Anfrage
SED-500DQF-F
SED · SED-500DQF-F · Hervorgehoben

SED-500DQF-F — Nitrogen Generator

Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English

SED-500DQF-F Nitrogen Generator. Compact, lightweight bench-top high-purity nitrogen generator for laboratory gas chromatography use. Replaces traditional N₂ gas cylinders. Output 0–500 ml/min at 0.4 MPa, purity 99.996%,

Lieferzeit
Auf Anfrage
Durchsatz
Kontaktieren Sie uns

Funktionsweise

Uses single-liquid-surface single-cathode catalytic electrolysis with KOH solution as electrolyte and clean air as feed gas. Clean air enters the cathode side of the electrolytic cell through a high-precision pressure regulator. Oxygen diffuses across the membrane and is electrochemically separated to the anode side, then vented from a liquid trap. Nitrogen on the cathode side passes through a catalytic bed that removes residual oxygen, then through an adsorption filter that removes trace impurities and moisture, exiting at the gas outlet. A program controller continuously matches output flow to the GC demand for fully automatic constant-pressure / constant-flow operation.

Prozessbeschreibung
1Uses single-liquid-surface single-cathode catalytic electrolysis with KOH solution as electrolyte and clean air as feed gas.
2Clean air enters the cathode side of the electrolytic cell through a high-precision pressure regulator.
3Oxygen diffuses across the membrane and is electrochemically separated to the anode side, then vented from a liquid trap.
4Nitrogen on the cathode side passes through a catalytic bed that removes residual oxygen, then through an adsorption filter that removes trace impurities and moisture, exiting at the gas outlet.
5A program controller continuously matches output flow to the GC demand for fully automatic constant-pressure / constant-flow operation.

Technische Daten

Technische Daten für Variante: SED-500DQF-F

Technische Daten

Modell
SED-500DQF-F
Spannung
AC 220V ±10% 50Hz
Versorgung
AC 220V ±10% 50Hz, 150 W max; periodic top-up of KOH electrolyte / deionized water
Konformitätsangaben
Operating environment: 10–40 °C, RH ≤85%
Leistung
0.15 kW
Luftdruck
Outlet 0.4 MPa, regulation precision 0.003 MPa

Abmessungen

Länge
400 mm
Breite
200 mm
Höhe
300 mm
Gewicht
9 kg

Wesentliche Merkmale

0–500 ml/min nitrogen output, auto-tracking the GC demand
Purity 99.996%
Outlet pressure 0.4 MPa, regulation precision 0.003 MPa
Auto-vent system, anti-back-flow protection, low-liquid-level reminder
Single-liquid-surface single-cathode catalytic electrolysis
Catalytic deoxygenation + adsorption filter for trace H₂O and impurity removal
Compact 400×200×300 mm chassis, approximately 9 kg
Power consumption only 150 W on AC 220V ±10% 50Hz
Continuous or intermittent use
Compatible with all GC brands/models
Operating environment: 10–40 °C, RH ≤85%
Replaces high-pressure N₂ cylinders in the laboratory
Auto-tracking flow + low-liquid-level reminder + anti-back-flow trap = safe, hands-off operation
Compact and light enough for bench-top deployment next to the GC

Anwendungen

Carrier gas for laboratory gas chromatographs
Nitrogen supply for analytical instruments

Branchen

Petroleum
Chemicals
Agrochemicals / pesticides
Fertilizer
Leistung
Tobacco
Pharma
Brewing / spirits
Tap water / utilities
Environmental monitoring
Public health / anti-epidemic
Universities / research institutes
SED
Sprechen Sie mit SED Sales Team
Maschinenspezialisten · Kontakt per WhatsApp
Geschäftszeiten und Verfügbarkeit beim Team erfragen

Dokumentation

Datenblatt (PDF)
Überblick, technische Daten und Abmessungen · Originaldokument (Englisch)
Beim Vertrieb anfragen
Bedienhandbuch
Einrichtung, Betrieb und Fehlersuche · Originaldokument (Englisch)
Beim Vertrieb anfragen
Vergleichsdatenblatt (Standard und Economy)
Vergleich der Konfigurationen · Originaldokument (Englisch)
Beim Vertrieb anfragen
IQ / OQ / PQ-Protokolle
Validierungsunterlagen zur GMP-Konformität · Originaldokument (Englisch)
Beim Vertrieb anfragen
FAT / SAT-Protokolle
Abnahmeprüfungen im Werk und vor Ort · Originaldokument (Englisch)
Beim Vertrieb anfragen
CAD-Zeichnungen (STEP / IGES / DWG)
Konstruktionszeichnungen für die Aufstellung · Originaldokument (Englisch)
Beim Vertrieb anfragen
Kalibrierzertifikate
Schallpegel, Erdungswiderstand, Spannungsfestigkeit und Rauheit · Originaldokument (Englisch)
Beim Vertrieb anfragen
DQ (Designqualifizierung)
Vollständiges Designqualifizierungsprotokoll · Originaldokument (Englisch)
Beim Vertrieb anfragen
Werkstoffzeugnisse
Zusammensetzung des Edelstahls 316L · Originaldokument (Englisch)
Beim Vertrieb anfragen
SED
WhatsApp · SED Vertrieb
Vertriebskontakt · WhatsApp
→