SED-25PG-J — Centrifugal Spray Dryer SED-25PG-J
Die vollständige Beschreibung dieses Modells wird noch übersetzt. Lesen Sie die englischen Details oder fragen Sie unser Team nach weiteren Informationen. English
SED-25PG-J Centrifugal Spray Dryer using spray-gun atomisation (Q=0.5 m³/min). Open-cycle co-current drying system. Heat source: 90 kW electric heater supplemented by steam. Drying chamber Φ2000 mm × H2150 mm (304 SS, 2
Funktionsweise
Feed solution (1–40% solids) is pumped by a peristaltic pump (0.6 kW, infinitely-variable speed) to a spray-gun atomiser (Q=0.5 m³/min) at the top of the drying chamber. Air drawn through a primary filter and heated by a 90 kW electric heater to 180–220°C enters via a spiral volute and a two-layer hot-air distributor with adjustable swirl angle. Hot air and droplets contact co-currently in the Φ2000 mm chamber; water evaporates in milliseconds, reducing moisture below 5%. Three SK30 pneumatic air hammers de-cake the cone bottom. Powder is recovered through a cyclone + bag filter + wet scrubber, with a 7.5 kW induced-draft fan providing system suction. Atomiser/feed-pump and heater/ID-fan are safety interlocked.