SED-990JJ2-H
حسب الطلب
SED · SED-990JJ2-H · 3 وحدة مباعة
SED-990JJ2-H — Metal Detection Machine
لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English
SED-990JJ2-H is a digital, multi-frequency, full-stainless-steel metal detection (metal-checker) machine. A balanced-coil three-coil probe driven by Multi-Mode 3F triple-frequency electronics detects ferrous, non-ferrous
مدة التسليم
حسب الطلب
الطاقة الإنتاجية
60–80 bottles/min(60–80 ppm typical reference)
مبدأ العمل
Balanced-coil three-coil method: a central transmit coil driven by an oscillator generates a magnetic field; two equally-spaced receive coils on either side are wound to cancel each other's signal to zero. When metal passes through the tunnel, it perturbs the field and unbalances the receive coils, producing a non-zero signal. A digital signal processor(DSP) performs product compensation, automatic phase localization, residual-compensation filtering, and outputs a rejection signal. Multi-Mode 3F triple-frequency electronics let the machine auto-select the frequency that best discriminates the contaminant from product effect(e.g., 50 kHz for aluminum-foil-packaged products).
وصف سير العمل
1Balanced-coil three-coil method: a central transmit coil driven by an oscillator generates a magnetic field; two equally-spaced receive coils on either side are wound to cancel each other's signal to zero.
2When metal passes through the tunnel, it perturbs the field and unbalances the receive coils, producing a non-zero signal.
3A digital signal processor(DSP) performs product compensation, automatic phase localization, residual-compensation filtering, and outputs a rejection signal.
4Multi-Mode 3F triple-frequency electronics let the machine auto-select the frequency that best discriminates the contaminant from product effect(e.g., 50 kHz for aluminum-foil-packaged products).
المواصفات الفنية
مواصفات التكوين: SED-990JJ2-H
المواصفات
الطراز
SED-990JJ2-H
الطاقة الإنتاجية
60–80 bottles/min(60–80 ppm typical reference)
الجهد
AC 220 V ±10%, 50/60 Hz, 1.5 kVA max(also accepts 110/240 V single-phase)
المرافق
Single-phase AC 220 V +/-10%(or 110/240 V), 50/60 Hz, 1.5 kVA max, separate dedicated circuit with circuit breaker(and leakage breaker in damp environments). Grounding: soft copper >=1.6 mm2 with grounding impedance < 100 Ohm. Operating environment: 0-40 degC, 30-85% RH, no condensation, no direct sunlight, no corrosive gases or saltwater, low vibration, low dust.
تفاصيل المطابقة
Equipment certified to ISO9000 and CE. Frame, control box, and conveyor are SUS304 food-grade stainless and the conveyor belt is food-grade PU, meeting HACCP, GMP, FDA, and CAS standards. NOT certified for combustible-dust environments - a custom explosion-proof variant is required for Zone 22 dusty service. Export configuration available with UL-certified electrical components on request.
الأبعاد
الطول
1600 mm
العرض
1050 mm
الارتفاع
1150 mm
الوزن
220 kg
مساحة التركيب
Overall conveyor frame 1600 mm L x 1050 mm W x 1150 mm H; frame height adjustable 750 +/-50 mm to match adjacent conveyors. Reserve clearance for service access to the control box at one end and a separate dedicated power circuit(do not share with large motors or packaging machines that generate electrical noise).
المواد
مواد التلامس
316 stainless steel(probe housing, epoxy-potted); food-grade PU conveyor belt
مواد الهيكل
SUS304 food-grade stainless steel frame, control box, and sheet-metal parts
المكونات
Belt Material
PU
التشغيل
FE Accuracy
1.5 mm mm
NonFE Accuracy
1.5 mm mm
SUS304 Accuracy
2.0 mm mm
Belt Speed Range
20-120 m/min m/min
Frequency Modes
3F
Operating Humidity
30-95% %
Operating Temperature
-10~ 40℃ °C
البيانات الفيزيائية
Detection Height
200 mm mm
Detection Width
300 mm mm
Frame Height
750 ±50 mm mm
السلامة
Alarm Method
+
Protection Rating
IP65
الخصائص الرئيسية
Detection tunnel 300 mm wide x 200 mm high
Sensitivity(open-air): Fe Phi1.5 mm sphere, Non-Fe Phi1.5 mm sphere, SUS304 Phi2.0 mm sphere
Triple-frequency Multi-Mode 3F with automatic frequency selection
Variable belt speed 20-120 m/min(no impact on accuracy in this range)
Speed envelope up to 1000 m/min with optional speed control upgrade
7-inch touchscreen HMI with multi-language support and password management
Self-learning auto-product registration - 12-second auto setup
Stores parameters for multiple product recipes
Photoelectric trigger with adjustable rejection delay/hold times
Audio-visual alarm + automatic belt stop on detection
Operating temp -10 degC to +40 degC, humidity 30-95%
IP65 enclosure
Probe encapsulated in 316 stainless steel with epoxy resin potting - washdown and thermal-shock tolerant
Full SUS304 food-grade frame, food-grade PU conveyor belt
Frame height 750 +/-50 mm
Customizable rejection devices: air-blast, push-rod, flap, etc.
Network/data-sharing capability for multi-machine deployments
Auto-learn means line operators set up new SKUs in under a minute, no engineer required
Triple-frequency rejects product effect from wet/salty/oily/aluminum-foil items where single-frequency detectors false-trigger
Cleanroom-friendly: full SS304/316 build, IP65, food-grade PU belt - wash down without losing calibration
Designed for HACCP/GMP/FDA/CAS audited lines(food + pharma)
Recipe storage + photoeye-gated detection cuts false rejects on multi-SKU shared lines
Networking lets QA teams pull alarm logs across all detectors in a plant
التطبيقات
Inline metal-contaminant rejection on packaged consumer goods lines
Bottled tablets / capsules / liquids
Bagged or jarred gummies and candies
Frozen, brined, and high-water-content food inspection
Aluminum-foil-packaged product inspection
Raw-material screening for chemicals, leather, knit fabric
القطاعات
الأدوية
Food & beverage (incl. bread, dumplings, biscuits, frozen, meat, seafood)
Toys
Garment & knitting
Footwear
Chemicals
Leather
العلامات التجارية للمكونات
Thermo Fisher (US) - control board (INBOARD-STEAWE6535) and sensing board (INBOARD-SEN160200)
MEAN WELL (Taiwan) - switch-mode power supplies LRS-150-24 and SP-480-12
Kantai Electronics (Taiwan) - solid-state relay PQSSR-HD 380VDC 20A
GoldRising (Guangdong) - OCM12864-2 display
LEMO - aviation connectors 3BT1G0801CLA90G / 3BZ1G801CLL
Delta Electronics (Taiwan) - conveyor VFD
Yongli (Shanghai) - food-grade PU conveyor belt
SKF - bearings
MISUMI - synchronous belt/pulley (25-tooth widened) and waterproof seals
Schneider (Germany) - switches and connectors
SED
تواصل مع SED Sales Team
متخصصو المعدات · تواصل عبر واتساب
استفسر عن مواعيد العمل وتوفر الفريق
الامتثال
ISO9000
CE
HACCP-aligned construction
GMP-aligned construction
FDA-aligned construction
CAS-aligned construction
التنظيف والصيانة
Regularly inspect and remove dust accumulation from the SED-990JJ2-H surface to prevent unsanitary buildup and explosion hazard in dust-prone environments. The 316 stainless probe and SUS304 frame tolerate washdown. Avoid cleaning chemicals or product temperatures that drive the resin-potting surface above +60 degC - fit a thermal protective cover when conveying high-temperature product.
الوثائق
ورقة البيانات (PDF)
نظرة عامة على المعدات والمواصفات والأبعاد · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
دليل التشغيل
التركيب والتشغيل واستكشاف الأعطال · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
ورقة مقارنة (قياسي واقتصادي)
مقارنة التكوينات · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات IQ / OQ / PQ
وثائق التحقق لمطابقة GMP · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات FAT / SAT
اختبارات القبول في المصنع وفي الموقع · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
رسومات CAD (STEP / IGES / DWG)
رسومات هندسية لتخطيط المنشأة · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المعايرة
مستوى الصوت ومقاومة التأريض والعزل وخشونة السطح · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
DQ (تأهيل التصميم)
بروتوكول كامل لتأهيل التصميم · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المواد
تركيب الفولاذ المقاوم للصدأ 316L · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات