صالة عرض في أونتاريو، كاليفورنيا · استفسر عن الدعم في وجهتك
الرئيسية / المعدات / وعاء تعقيم بالبخار / Electric-heating Automatic Steam Sterilizer
SED-400ZQMJ-A
حسب الطلب
SED-400ZQMJ-A
SED · SED-400ZQMJ-A · مميز

SED-400ZQMJ-A — Electric-heating Automatic Steam Sterilizer

لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English

SED-400ZQMJ-A fully-automatic high-temperature steam sterilizer (electric-heating type). Stainless-steel welded chamber with internal stainless basket, handwheel-operated lid, screw-thread sealing and translating lid ope

اختر التكوين (2)
مدة التسليم
حسب الطلب
الطاقة الإنتاجية
65–100 L

مبدأ العمل

Electric heating tubes heat the water in the chamber to generate steam. A touchscreen computer board controls sterilisation time, temperature, pressure and cool-down temperature. Solenoid valves handle automatic exhaust and air replenishment; check valves prevent steam backflow. A pressure sensor manages temperature control and cool-down pressure compensation. At the end of the cycle the unit automatically enters the cool-down phase and sounds an audible alarm.

وصف سير العمل
1Electric heating tubes heat the water in the chamber to generate steam.
2A touchscreen computer board controls sterilisation time, temperature, pressure and cool-down temperature.
3Solenoid valves handle automatic exhaust and air replenishment; check valves prevent steam backflow.
4A pressure sensor manages temperature control and cool-down pressure compensation.
5At the end of the cycle the unit automatically enters the cool-down phase and sounds an audible alarm.

المواصفات الفنية

مواصفات التكوين: 65 L basket 370×540 ×1

المواصفات

الطراز
SED-400ZQMJ-A
الطاقة الإنتاجية
65–100 L
الجهد
220V/50Hz
المرافق
Compressed air at 0.3 MPa
القدرة
4.5 kW
ضغط الهواء
0.22 MPa

الأبعاد

الطول
400 mm

المواد

مواد التلامس
High-quality stainless-steel chamber body; stainless-steel basket; silicone rubber sealing ring
مواد الهيكل
Stainless-steel welded chamber body

الخصائص الرئيسية

Electric-heating type: high heating efficiency, fast warm-up
High-quality stainless-steel welded chamber body
Built-in stainless-steel basket
Handwheel lid opener, screw-thread seal, translating lid mechanism
Touchscreen computer-board control
Full-cycle time/temperature/pressure/cool-down temperature control
End-of-cycle audible alarm
Low-water alarm device(protects heating tube)
Pressure gauge; safety valves ×2; solenoid valves ×2; manual ball valves ×2
Heating tube + check valves ×2(water inlet / air replenishment)
Pressure sensor for cool-down pressure compensation
Inner pot diameter 400 mm
Sterilisation chamber effective capacity: 65 L or 100 L
Basket dimensions — 65 L: 370×540×1 / 100 L: 370×340×2
Rated working pressure 0.22 MPa; operating pressure range 0.15-0.2 MPa
Time range 0-999 min; temperature range 0-130 °C, precision 0.1 °C, error ±0.5 °C
Silicone rubber sealing ring
Operating environment 10-50 °C, relative humidity 30%-70%
Service life 8 years
Electric heating for fast warm-up and high efficiency
Fully automatic control(time, temperature, pressure, cool-down)
Multiple safety devices: safety valve, low-water alarm, check valves
8-year service life

التطبيقات

Steam sterilisation
Sterilisation of injectables and pharmaceuticals

القطاعات

الأدوية
Injectable products

العلامات التجارية للمكونات

PLC
Not specified
SED
تواصل مع SED Sales Team
متخصصو المعدات · تواصل عبر واتساب
استفسر عن مواعيد العمل وتوفر الفريق

التنظيف والصيانة

Descale regularly(recommended every 3 months); use de-ionised water or boiled water to prevent scale build-up on the heating tube and chamber interior. Protect and regularly replace the silicone sealing ring between lid and body. Lubricate bolts, nuts and other rotating parts monthly. Replace the safety valve every six months.

الوثائق

ورقة البيانات (PDF)
نظرة عامة على المعدات والمواصفات والأبعاد · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
دليل التشغيل
التركيب والتشغيل واستكشاف الأعطال · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
ورقة مقارنة (قياسي واقتصادي)
مقارنة التكوينات · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات IQ / OQ / PQ
وثائق التحقق لمطابقة GMP · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات FAT / SAT
اختبارات القبول في المصنع وفي الموقع · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
رسومات CAD (STEP / IGES / DWG)
رسومات هندسية لتخطيط المنشأة · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المعايرة
مستوى الصوت ومقاومة التأريض والعزل وخشونة السطح · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
DQ (تأهيل التصميم)
بروتوكول كامل لتأهيل التصميم · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المواد
تركيب الفولاذ المقاوم للصدأ 316L · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
SED
واتساب · مبيعات SED
التواصل مع المبيعات · واتساب
→