صالة عرض في أونتاريو، كاليفورنيا · استفسر عن الدعم في وجهتك
الرئيسية / المعدات / جهاز تقطير المياه / 5-Effect Tubular Multi-Effect Water-for-Injection Still
SED-300ZLS-N
حسب الطلب
SED-300ZLS-N
SED · SED-300ZLS-N · مميز

SED-300ZLS-N — 5-Effect Tubular Multi-Effect Water-for-Injection Still

لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English

SED-300ZLS-N is a 5-effect tubular multi-effect water-for-injection (WFI) still, co-developed with Prof. Lin Zaiqi (inventor of China's multi-effect distillation still, Dalian University of Technology) and incorporating

Chinese Pharmacopoeia 2020 — Water for Injection standardConductivity <2 µS/cm per national standard (achieved <0.6 µS/cm)Bacterial endotoxin ≤0.252 EU/mL per national standard (achieved <0.125 EU/mL)
اختر التكوين (1)
مدة التسليم
حسب الطلب
الطاقة الإنتاجية
300 L/h

مبدأ العمل

Five-effect falling-film distillation: industrial steam enters Effect I and heats pre-treated feed water, vaporising pure steam; pure steam from Effect I serves as the heat source for Effect II, cascading through Effects III–V. Each effect operates at successively lower pressure and temperature, maximising energy recovery(>20% steam savings). Distillate is condensed in a high-temperature condenser then a low-temperature condenser. A conductivity sensor(CCT8301A, 316L) continuously monitors the distillate outlet; off-spec water is automatically diverted. Xianko PLC + 7-inch touchscreen provides full-automatic unattended operation with alarms for low/high water level, low/medium/high pressure.

وصف سير العمل
1Five-effect falling-film distillation: industrial steam enters Effect I and heats pre-treated feed water, vaporising pure steam; pure steam from Effect I serves as the heat source for Effect II, cascading through Effects III–V.
2Each effect operates at successively lower pressure and temperature, maximising energy recovery(>20% steam savings).
3Distillate is condensed in a high-temperature condenser then a low-temperature condenser.
4A conductivity sensor(CCT8301A, 316L) continuously monitors the distillate outlet; off-spec water is automatically diverted.
5Xianko PLC + 7-inch touchscreen provides full-automatic unattended operation with alarms for low/high water level, low/medium/high pressure.

المواصفات الفنية

مواصفات التكوين: 5-effect SED-300ZLS-N)

المواصفات

الطراز
SED-300ZLS-N
الطاقة الإنتاجية
300 L/h
القدرة
0.755 kW

الأبعاد

الطول
1600 mm
العرض
800 mm
الارتفاع
2500 mm

المواد

مواد التلامس
316L stainless steel for all distillate, pure-steam and feed-water wetted surfaces(evaporator tubes, gas-liquid separators, condensers, piping, valves, pump); 304 stainless steel for non-contact frame, ducting and electrical cabinet
مواد الهيكل
304 stainless steel frame, machine rack and electrical cabinet(600×200×650 mm)

الخصائص الرئيسية

Five-effect tubular multi-effect distillation, 316L wetted parts(304 elsewhere)
Distillate conductivity <0.6µS/cm; bacterial endotoxin <0.125 EU/mL
Meets 2020 Chinese Pharmacopoeia Water for Injection standard
Qualified WFI within 5 minutes of start-up
Steam savings >20%; no extra cooling water needed
Overall dimensions 1600 × 800 × 2500 mm
Siemens 0.75 kW VFD for feed water pump control
Xianko PLC + 7-inch touchscreen + I/O modules for full-auto unattended operation
Gas-liquid separators with vane, mesh mist eliminator and reverse water separator per effect
Engineered to exceed 2020 Pharmacopoeia WFI standard
Co-developed with Finnish/US/Italian know-how and Prof. Lin Zaiqi(Dalian Univ. of Technology)
Sold as part of complete WFI system with SED-65DZQ-N pure-steam generator and SED-500WSX-N storage tank

التطبيقات

Production of Water for Injection(WFI) for pharmaceutical manufacturing
High-purity distilled water for injectable formulations

القطاعات

Pharmaceutical injectable manufacturing
Biotech and life-science manufacturing
Hospital pharmacy production

العلامات التجارية للمكونات

VFD 0.75 kW
Siemens
PLC + 7-inch touchscreen + I/O modules
Xianko
Switching power supply 24V/7A
Meanwell
Circuit breakers, contactors, relays, buttons
Chint
Conductivity controller probe CCT8301A
Metal flow meter 0–1000 L
SED
تواصل مع SED Sales Team
متخصصو المعدات · تواصل عبر واتساب
استفسر عن مواعيد العمل وتوفر الفريق

الامتثال

Chinese Pharmacopoeia 2020 — Water for Injection standard
Conductivity <2µS/cm per national standard(achieved <0.6µS/cm)
Bacterial endotoxin ≤0.252 EU/mL per national standard(achieved <0.125 EU/mL)

الوثائق

ورقة البيانات (PDF)
نظرة عامة على المعدات والمواصفات والأبعاد · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
دليل التشغيل
التركيب والتشغيل واستكشاف الأعطال · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
ورقة مقارنة (قياسي واقتصادي)
مقارنة التكوينات · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات IQ / OQ / PQ
وثائق التحقق لمطابقة GMP · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات FAT / SAT
اختبارات القبول في المصنع وفي الموقع · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
رسومات CAD (STEP / IGES / DWG)
رسومات هندسية لتخطيط المنشأة · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المعايرة
مستوى الصوت ومقاومة التأريض والعزل وخشونة السطح · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
DQ (تأهيل التصميم)
بروتوكول كامل لتأهيل التصميم · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المواد
تركيب الفولاذ المقاوم للصدأ 316L · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
SED
واتساب · مبيعات SED
التواصل مع المبيعات · واتساب
→