صالة عرض في أونتاريو، كاليفورنيا · استفسر عن الدعم في وجهتك
الرئيسية / المعدات / آلة تحبيب / Disc Granulator (Pan Granulator)
SED-300YPZL-B
حسب الطلب
SED-300YPZL-B
SED · SED-300YPZL-B · مميز

SED-300YPZL-B — Disc Granulator

لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English

SED-300YPZL-B is a 300 mm bench-top disc / pan granulator (also known as a balling pan, ball-forming disc, disc-type granulator-mixer or disc ball-making machine) for granulating powders, small pellets and small lumps in

اختر التكوين (2)
مدة التسليم
حسب الطلب
الطاقة الإنتاجية
1–3 kg/batch

مبدأ العمل

Pre-watered disc-balling method: raw powder is uniformly humidified by atomized water in a twin-shaft mixer to form uniformly sized seed balls(moisture controlled to 12-14%; most water added in mixer, only 0-3% supplemental water added on the disc); seed balls then enter the inclined rotating disc. For dry-powder granulation, powder is added directly on the disc and lightly sprayed with water. Inside the disc, centrifugal force, friction and gravity drive the seed balls along a parabolic path; viscosity and plasticity make them coalesce and grow. With fixed disc tilt, rim height, rotation speed and moisture, granules of different sizes leave the disc rim at different escape angles. As balls roll, internal water migrates to the surface; binder cohesion and natural surface evaporation give the balls strength, and finished granules discharge over the rim with disc rotation.

وصف سير العمل
1Pre-watered disc-balling method: raw powder is uniformly humidified by atomized water in a twin-shaft mixer to form uniformly sized seed balls(moisture controlled to 12-14%; most water added in mixer, only 0-3% supplemental water added on the disc); seed balls then enter the inclined rotating disc.
2For dry-powder granulation, powder is added directly on the disc and lightly sprayed with water.
3Inside the disc, centrifugal force, friction and gravity drive the seed balls along a parabolic path; viscosity and plasticity make them coalesce and grow.
4With fixed disc tilt, rim height, rotation speed and moisture, granules of different sizes leave the disc rim at different escape angles.
5As balls roll, internal water migrates to the surface; binder cohesion and natural surface evaporation give the balls strength, and finished granules discharge over the rim with disc rotation.

المواصفات الفنية

مواصفات التكوين: Disc diameter 300 mm

المواصفات

الطراز
SED-300YPZL-B
الطاقة الإنتاجية
1–3 kg/batch
الجهد
أحادي الطور 220V 50Hz
القدرة
0.25 kW

الأبعاد

الطول
500 mm
العرض
300 mm
الارتفاع
600 mm

المواد

مواد التلامس
Stainless steel disc liner

الخصائص الرئيسية

300 mm pan diameter, manually adjustable tilt 30-90 deg(optimal 45 deg)
Granulation yield over 93%
Open discharge with adjustable speed switch for intermittent batch operation
Heavy reinforced base, no anchor bolts required, smooth running
Main gear high-frequency hardened, doubling service life
Stainless-steel disc liner, corrosion and wear resistant
Multi-rib radial steel plate disc bottom for rigidity
Soft-start to dampen impact and extend equipment life
Disc rotation speed 0-45 rpm
Cycle time 3-5 min per batch
Bench-top format with 1-3 kg per batch(3-5 min cycle)
Manually adjustable disc tilt over a wide range(30-90 deg)
Robust construction designed for long service life

التطبيقات

Granulation / spheronization of powders, pellets and small lumps
Pre-watered disc balling and dry-powder granulation

القطاعات

Pharmaceutical / nutraceutical solid-dose preparation
Fine chemicals and fertilizer granulation
Laboratory and pilot R&D
SED
تواصل مع SED Sales Team
متخصصو المعدات · تواصل عبر واتساب
استفسر عن مواعيد العمل وتوفر الفريق

الوثائق

ورقة البيانات (PDF)
نظرة عامة على المعدات والمواصفات والأبعاد · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
دليل التشغيل
التركيب والتشغيل واستكشاف الأعطال · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
ورقة مقارنة (قياسي واقتصادي)
مقارنة التكوينات · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات IQ / OQ / PQ
وثائق التحقق لمطابقة GMP · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات FAT / SAT
اختبارات القبول في المصنع وفي الموقع · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
رسومات CAD (STEP / IGES / DWG)
رسومات هندسية لتخطيط المنشأة · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المعايرة
مستوى الصوت ومقاومة التأريض والعزل وخشونة السطح · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
DQ (تأهيل التصميم)
بروتوكول كامل لتأهيل التصميم · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المواد
تركيب الفولاذ المقاوم للصدأ 316L · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
SED
واتساب · مبيعات SED
التواصل مع المبيعات · واتساب
→