SED-2000CRJ-G — In-Line Pallet Film Wrapping Machine
لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English
SED-2000CRJ-G in-line pallet stretch wrapping machine with automatic film-load / film-cut / film-smooth system. Turntable diameter 2000mm, turntable height 500mm, effective wrapping height 2000mm, conveyor roller-line ef
مبدأ العمل
Goods enter the wrapping machine on the conveyor line; a photoelectric sensor detects the goods height and stops the rollers at the correct position. The turntable rotates at variable frequency(0–8 rpm), winding LLDPE stretch film(pre-stretched to 300%) from the bottom up. The film carriage rises and falls on a high-strength belt-traction lifting mechanism according to programmable top/bottom lap counts(1–9 each). After completing the set number of wrapping passes, the pneumatic auto film-load/cut/smooth system seals the film tail. The conveyor then transfers the wrapped pallet out, ready for the next cycle.
المواصفات الفنية
المواصفات
الأبعاد
الخصائص الرئيسية
التطبيقات
القطاعات
العلامات التجارية للمكونات
التنظيف والصيانة
Perform break-in maintenance after first week of operation. Regularly check all fastening screws. Lubricate turntable drive chain with grease every three months(remove 6 turntable screws to access). Lubricate the 8 base rollers every three months; replace if worn. Lubricate the column chain every three months(open column door to access). Lubricate film-carriage slides monthly(apply until just before dripping).