صالة عرض في أونتاريو، كاليفورنيا · استفسر عن الدعم في وجهتك
SED-12QX-L
حسب الطلب
SED-12QX-L 12-Head Rotary Bottle Washing Machine
SED · SED-12QX-L · 1 وحدة مباعة

SED-12QX-L — 12-Head Rotary Bottle Washing Machine

لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English

SED-12QX-L Automatic 12-head rotary bottle washing machine. Closed-design rotary bottle rinser with both water and air washing options, suitable for wine, fruit wine, liquor, sauce, honey, beverage and PET bottle product

مدة التسليم
حسب الطلب
الطاقة الإنتاجية
2500–3000 bph

مبدأ العمل

Motor and reducer drive the main shaft, which rotates 12 grippers through a circular path. The infeed star wheel transfers bottles into the grippers; a flipping track inverts each bottle to the vertical mouth-down position. A water(or air) distribution valve opens to flush each bottle for a controlled time, then closes; the bottle drains over the controlled-bottle station to leave no residual water; the gripper flips the bottle upright again and the outfeed star wheel discharges. Limit switches at every station auto-stop on faults.

وصف سير العمل
1Motor and reducer drive the main shaft, which rotates 12 grippers through a circular path.
2The infeed star wheel transfers bottles into the grippers; a flipping track inverts each bottle to the vertical mouth-down position.
3A water(or air) distribution valve opens to flush each bottle for a controlled time, then closes; the bottle drains over the controlled-bottle station to leave no residual water; the gripper flips the bottle upright again and the outfeed star wheel discharges.
4Limit switches at every station auto-stop on faults.

المواصفات الفنية

مواصفات التكوين: SED-12QX-L

المواصفات

الطراز
SED-12QX-L
الطاقة الإنتاجية
2500–3000 bph
الجهد
380V(main 1.1 kW; lifting 0.37 kW)
المرافق
380 V 3-phase mains for approximately 1.5 kW total(1.1 kW main + 0.37 kW lift); rinse water supply or compressed air for air-wash mode
القدرة
1.47 kW

المواد

مواد التلامس
Rubber pad on claw(bottle-mouth seal)

الخصائص الرئيسية

12 heads(grippers) per cycle
Throughput 2500-3000 bottles/hour
Applicable bottle mouth diameter: phi 22-32 mm
Applicable bottle height: 120-360 mm
Applicable bottle-neck diameter: phi 40-100 mm
Main motor: 1.1 kW, 380 V
Lifting motor: 0.37 kW, 380 V
Closed-housing design prevents contamination
Inverter(frequency conversion) speed regulation
Electric height adjustment for quick changeover
Water and air rinse channels available
Water/air distribution valve controls flush and drain times
High-precision long-life claw grippers
Limit switches throughout for fault auto-stop
Italian-derived design with closed hygienic enclosure
Dual water/air rinse capability
12 heads at 2500-3000 bph saves time and labor
Low water consumption with controlled valve timing
Electric height adjustment simplifies changeover
Auto-stop on faults via limit switches

التطبيقات

Wine and spirits bottle washing
Sauce and condiment bottle washing
Honey bottle washing
Beverage and PET bottle washing

القطاعات

Wine and spirits
Beverage
Sauce/condiment
Honey
General food packaging
SED
تواصل مع SED Sales Team
متخصصو المعدات · تواصل عبر واتساب
استفسر عن مواعيد العمل وتوفر الفريق

الوثائق

ورقة البيانات (PDF)
نظرة عامة على المعدات والمواصفات والأبعاد · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
دليل التشغيل
التركيب والتشغيل واستكشاف الأعطال · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
ورقة مقارنة (قياسي واقتصادي)
مقارنة التكوينات · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات IQ / OQ / PQ
وثائق التحقق لمطابقة GMP · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
بروتوكولات FAT / SAT
اختبارات القبول في المصنع وفي الموقع · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
رسومات CAD (STEP / IGES / DWG)
رسومات هندسية لتخطيط المنشأة · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المعايرة
مستوى الصوت ومقاومة التأريض والعزل وخشونة السطح · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
DQ (تأهيل التصميم)
بروتوكول كامل لتأهيل التصميم · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
شهادات المواد
تركيب الفولاذ المقاوم للصدأ 316L · المستند الأصلي (الإنجليزية)
اطلب من فريق المبيعات
SED
واتساب · مبيعات SED
التواصل مع المبيعات · واتساب
→