SED-10QX — 10-Head Rotary Air Bottle Washing Machine
لا تزال ترجمة الوصف الكامل لهذا الطراز قيد العمل. راجع التفاصيل بالإنجليزية أو اطلب المعلومات من فريقنا. English
SED-10QX is a 10-head rotary air bottle-washing machine for round plastic bottles (diameter ≤60 mm, height 40–100 mm; mold change required for different sizes). Bottles are gripped by a stainless-steel manipulator, inver
مبدأ العمل
Bottles enter on a conveyor and are positioned by the spur-gear-driven stainless-steel manipulator, which clamps and inverts each bottle 180° over the wash station. A high-pressure air blowing valve(lip-seal with plunger guide) blasts compressed air into the inverted bottle to dislodge dust and particulates; an extraction system simultaneously draws the dirty air out. The manipulator then rotates the bottle upright and discharges it. A photoelectric sensor detects bottle presence so the blowing valve fires only when a bottle is in position. PLC + HMI controls speed and reports current production rate digitally.
المواصفات الفنية
المواصفات
الأبعاد
المواد
التوافق
الكهرباء
التشغيل
الخصائص الرئيسية
التطبيقات
القطاعات
العلامات التجارية للمكونات
التنظيف والصيانة
Regularly inspect dust port and clean it. Do not stack items on the air vent. Adjust and contact factory if air duct blockage occurs in operation. Cut power immediately if pressure overload. Periodically check bolts and inspect belt wear; repair or replace promptly. Keep equipment clean — free of dust and oil residue, belt path clear of debris. Mechanical parts can be cleaned with detergent(alcohol) and clean cloth; do not splash water or cleaning agents on electronic components. When idle long-term, clean and store.