SED-0.5PG-Z

Closed-loop nitrogen spray drying with solvent recovery. Slurry is fed by a peristaltic pump(Sinuo YZ15) through silicone tubing to an imported QFN-BL-J-W2019 two-fluid hollow-cone atomizer(60° spray angle, mean droplet < 100μm, liquid pressure 0.1–0.3 MPa). The atomized slurry meets a stream of heated nitrogen in theΦ220 SUS316L drying tower; solvent evaporates and the dry powder falls to the tower-bottom collection bottle. The exhaust nitrogen stream(now carrying solvent vapor) exits through a cyclone separator and PTFE-coated SUS316L bag filter(≥99% total recovery), then enters the condensation system where the solvent vapor is liquefied at temperatures down to −40 °C(DLSB-50/40 chiller, 5.7 kW; ethanol recovery ≥96%). The dry inert gas is recirculated by a Taiwan DaGang blower(1.3 kW) through an H13 high-efficiency filter back into the heater and drying tower, completing the closed loop. An online oxygen analyzer monitors inert-loop integrity continuously; a nitrogen-line pressure switch prevents operation without adequate N₂ supply. Heating uses a dual-stage system(pre-heater + main heater totalling 5 kW, PID controlled to ±1 °C) to avoid excessive heater-wall temperature.