Accueil / Équipements / Purificateur / Fume and Dust Purifier

SED-JHQ-G

Sur devis

SED-JHQ-G

SED · SED-JHQ-G · En vedette

SED-JHQ-G — Fume and Dust Purifier

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

Compact bench-top fume and dust purifier for laser cutting/marking, machining, SMT reflow, wave soldering, hand soldering, lab, moxibustion/beauty, and hospital workstations. Multi-stage filtration delivers 99.97% effici

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

A brushless vortex blower draws contaminated air through a Ø75 mm flexible suction arm. Air passes through pre-filter cotton, mid-stage HEPA, and a high-efficiency final filter (0.3 µm @ 99.97%); cleaned air is exhausted directly indoors. Variable-speed control (10 levels) adjusts flow up to 350 m³/h.

Processus de fonctionnement

1A brushless vortex blower draws contaminated air through a Ø75 mm flexible suction arm.

2Air passes through pre-filter cotton, mid-stage HEPA, and a high-efficiency final filter (0.3 µm @ 99.97%); cleaned air is exhausted directly indoors.

3Variable-speed control (10 levels) adjusts flow up to 350 m³/h.

Caractéristiques techniques

Caractéristiques de la variante : SED-JHQ-G single Ø75 mm inlet

Caractéristiques

Modèle

SED-JHQ-G

Tension

220V 50Hz 1Φ

Puissance

0.2 kW

Dimensions

Longueur

420 mm

Largeur

260 mm

Hauteur

460 mm

Poids

19 kg

Caractéristiques principales

Single-port Ø75 mm suction inlet, system flow 350 m³/h

Brushless motor — low noise, high RPM, zero-maintenance

Vortex blower for high-suction, fatigue-resistant operation

10-step variable speed control with digital display

Multi-stage filtration: pre-filter cotton + medium HEPA + high-efficiency filter

Filtration efficiency 99.97 % @ 0.3 µm

Noise ≤52 dB

Individually replaceable filter cartridges to extend service life

All-metal frame with shock and vibration resistance

Bottom castors with brakes for mobility

Programmable shut-off timer, 1–300 minutes

Operating environment: ambient to 50 °C, humidity 40–80 %

Direct indoor discharge — no ducting required

Single Ø75 mm × 1.2 m flexible suction arm focuses extraction at the source

Brushless motor: zero maintenance, zero consumables (motor only)

Applications

Laser cutting and laser marking fume extraction

Soldering: SMT reflow, wave solder, hand-soldering benches

Mechanical machining dust capture

Lab fume extraction

Moxibustion / beauty salon smoke removal

Hospital procedure smoke extraction

Secteurs

Electronics manufacturing

Laser processing

Laboratory and R&D

Medical and beauty

Pharmaceutical R&D

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Open the top cover to replace filters. Install filter layers in order: high-efficiency filter, medium HEPA, pre-filter cotton. Press and latch the top cover on both sides. Replace pre-filter cotton regularly (5-pack supplied); replace HEPA and high-efficiency filter cartridges as needed. Suction arm: keep bend gradual to maintain suction; position intake within 150 mm of the work point; avoid high-airflow environments.