Accueil / Équipements / Sécheur continu à lit fluidisé vibrant ZGF (avec refroidissement LZGF / granulation par pulvérisation PZGF) / Vibrating Fluid Bed Dryer

SED-800ZGF-G

Sur devis

SED-800ZGF-G

SED · SED-800ZGF-G · En vedette

SED-800ZGF-G — Vibrating Fluid Bed Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

The SED-800ZGF-G Vibrating Fluid Bed Dryer has a capacity of 400–800 kg/h, drying bed area 2.275 m², and total installed power 25 kW (380V 50Hz 3Φ). Material-contact parts are 904 stainless steel. Vibrating motors genera

Délai de livraison

Sur devis

Cadence

400–800 kg/h

Fonctionnement

Cold air is filtered by a primary filter, heated to 150°C by the steam heat exchanger, and fed into the fluid bed air chamber via the inlet. Wet material enters the bed continuously; under the dual action of vibration (two 1.5 kW motors at 16.67 Hz) and uniformly distributed hot air through the air-distribution plate, the material is suspended and contacts the hot airstream for heat-and-mass-transfer drying. Exhaust air is cleaned by the cyclone separator and pulse bag filter before being discharged by the induced draft fan. Dried product exits via the discharge outlet.

Processus de fonctionnement

1Cold air is filtered by a primary filter, heated to 150°C by the steam heat exchanger, and fed into the fluid bed air chamber via the inlet.

2Wet material enters the bed continuously; under the dual action of vibration (two 1.5 kW motors at 16.67 Hz) and uniformly distributed hot air through the air-distribution plate, the material is suspended and contacts the hot airstream for heat-and-mass-transfer drying.

3Exhaust air is cleaned by the cyclone separator and pulse bag filter before being discharged by the induced draft fan.

4Dried product exits via the discharge outlet.

Caractéristiques techniques

Caractéristiques de la variante : SED-800ZGF-G

Caractéristiques

Modèle

SED-800ZGF-G

Cadence

400–800 kg/h

Tension

380V 50Hz 3Φ

Puissance

25 kW

Matériaux

Matériaux en contact

904 stainless steel: main unit upper chamber 2 mm; air-distribution plate 1.5 mm; lower chamber inner liner; cyclone separator 3 mm; pulse bag filter 2 mm; inlet duct Φ300; damper Φ350; outlet duct Φ400 1.5 mm

Matériaux du bâti

Insulated outer shell: SUS 304 stainless steel; frame and reinforcing ribs: SUS 304 stainless steel; induced draft fan housing: carbon steel Q235A; shutdown fan: SUS 304 stainless steel; insulation: silica-alumina rock wool 50 mm

Caractéristiques principales

Capacity 400–800 kg/h

Drying bed area 2.275 m²

Two vibrating motors 1.5 kW each at 16.67 Hz

Steam heater 200 m², operating pressure 0.4–0.6 MPa, steam consumption 200–350 kg/h

Blower 5.5 kW (4-72No4A); induced draft fan 15 kW (9-26No5A)

Inlet air temperature 150°C, digital display and automatic temperature control with over-temperature alarm

Air-distribution plate: 0.5 m fish-scale holes + 3.0 m straight holes Φ1.5 mm

Cyclone separator CLP-700, inlet wind speed 19 m/s

Pulse bag filter MC-72-54-1, filter area 54 m², 72 bags Φ120×2000 mm, 500g anti-static polyester needle felt, compressed-air back-blow cleaning

Shutdown fan TGFY.3 0.75 kW (×2)

Silica-alumina rock wool insulation 50 mm thick

Soft connections at main unit inlet/outlet, multi-point vibration damping

Total installed power 25 kW

Electrical components: Chint

904 stainless steel material contact — excellent corrosion resistance

Dual fluidisation by vibration + hot air for uniform drying

Multi-point vibration damping on the entire frame for stable operation

Automatic temperature control + over-temperature alarm for safe, reliable operation

Complete process chain: filtration → heating → drying → dust removal → induced draft

Applications

Continuous drying of powder/granule materials

Fluid bed drying of wet granules

Drying of heat-sensitive materials

Secteurs

Pharmaceutique

Food

Chemical

Granule/powder processing

Marques des composants

/Electrical components

Chint

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →