Accueil / Équipements / Étuve de précision / Precision Oven

SED-72JMX-Y

Sur devis

SED-72JMX-Y

SED · SED-72JMX-Y · En vedette

SED-72JMX-Y — Precision Oven

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-72JMX-Y precision oven (drying / curing oven), 72 L working volume (W450 × H400 × D400 mm). Temperature range RT+10°C to +300°C; ramps from RT to 100°C in ~10 min, cool-down 300°C to RT ~1 h. Temperature stability ≤±

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Forced-circulation BTC (Balanced Temperature Control): a centrifugal fan draws air through nichrome heating elements and pushes hot air via dual horizontal channels into the chamber, then back through the return duct. PID microcomputer compares K-type sheathed thermocouple feedback to set point and modulates SSR-driven heater output for dynamic equilibrium.

Processus de fonctionnement

1Forced-circulation BTC (Balanced Temperature Control): a centrifugal fan draws air through nichrome heating elements and pushes hot air via dual horizontal channels into the chamber, then back through the return duct.

2PID microcomputer compares K-type sheathed thermocouple feedback to set point and modulates SSR-driven heater output for dynamic equilibrium.

Caractéristiques techniques

Caractéristiques de la variante : SED-72JMX-Y

Caractéristiques

Modèle

SED-72JMX-Y

Tension

220V 50Hz 1Φ

Puissance

4.5 kW

Matériaux

Matériaux en contact

304 high-temperature-resistant stainless steel (inner chamber, argon-arc welded)

Matériaux du bâti

A3 steel plate with anti-static powder-coated finish (outer shell); high-density aluminum silicate (insulation)

Caractéristiques principales

Working chamber 72 L (W450 × H400 × D400 mm)

Temperature range RT+10°C to +300°C

Ramp RT → 100°C in ~10 min; 300°C → RT in ~1 h

Temperature stability ≤±1%, uniformity ≤±1% (per GB/T 2423.2)

PID controller with PV/SV display, 0.1°C resolution

Self-tuning PID + SSR control for stable temperature

Energy-saving mode reduces power draw 80–90% after reaching set point

304 SS argon-arc-welded inner chamber (no self-generated dust)

High-density aluminum silicate insulation

Anti-static powder-coated A3 steel outer shell

Centrifugal fan + dual horizontal hot-air channels

25×25 cm viewing window (omitted above 200°C)

Two standard shelves

Air intake / exhaust ports

Multiple safety protections: ground, independent over-temperature, heater short-circuit / overload, blower-motor overload

Energy consumption ~1/10 of comparable peers thanks to PID energy-saving mode

Low outer-shell temperature minimizes impact on room temperature

Stable temperature control with self-tuning PID

Fast recovery after door open/close events

Applications

Heat vulcanization of rubber and synthetic rubber products

Curing of rubber hoses, belts, sealing strips

Curing of synthetic rubber wires

Curing of silicone insulation sleeves

General precision drying / heat treatment of small parts

Secteurs

Rubber and synthetic rubber processing

Wire and cable

Electronics

Pharmaceutical / lab

General manufacturing

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →