Accueil / Équipements / Laveuse de bouchons en caoutchouc / Automatic Rubber Stopper Washer (75,000 stoppers/batch)
SED-7.5YX-Z
Sur devis
SED-7.5YX-Z
SED · SED-7.5YX-Z · En vedette
SED-7.5YX-Z — Automatic Rubber Stopper Washer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-7.5YX-Z Automatic Rubber Stopper Washer is a fourth-generation pharmaceutical rubber stopper cleaning, siliconization, sterilization, and drying machine designed to fully meet the new GMP requirements (China 2010 GMP
Délai de livraison
Sur devis
Cadence
7.5 /
Fonctionnement
Stoppers tumble in a slowly rotating drum (0.5-8 rpm VFD) inside a sealed chamber. Mechanical motion combines with high-pressure water spray, intermittent compressed-air injection that creates boiling/bubble-collapse impacts, and vacuum degassing — together stripping contaminants from every stopper surface (including crevices and pin-holes). Self-circulating filtered water (two-stage filter) provides fine wash and rinsing to save WFI. Saturated pure steam at 121 ℃ is held for an F0-controlled period (recalculated every 6 s) for sterilization. Vacuum drying followed by 100-class hot-air drying removes residual moisture; vacuum-cycled cooling brings the load below 60 ℃. Reverse drum rotation discharges via a closed CIP/SIP-capable port with airbag seal and inter-locked dual doors separating the loading (D/C-grade) and discharge (A-grade) cleanrooms.
Processus de fonctionnement
1Stoppers tumble in a slowly rotating drum (0.5-8 rpm VFD) inside a sealed chamber.
2Mechanical motion combines with high-pressure water spray, intermittent compressed-air injection that creates boiling/bubble-collapse impacts, and vacuum degassing — together stripping contaminants from every stopper surface (including crevices and pin-holes).
3Self-circulating filtered water (two-stage filter) provides fine wash and rinsing to save WFI.
4Saturated pure steam at 121 ℃ is held for an F0-controlled period (recalculated every 6 s) for sterilization.
5Vacuum drying followed by 100-class hot-air drying removes residual moisture; vacuum-cycled cooling brings the load below 60 ℃.
6Reverse drum rotation discharges via a closed CIP/SIP-capable port with airbag seal and inter-locked dual doors separating the loading (D/C-grade) and discharge (A-grade) cleanrooms.
Caractéristiques techniques
Caractéristiques de la variante : SED-7.5YX-Z
Caractéristiques
Modèle
SED-7.5YX-Z
Cadence
7.5 /
Tension
380V 50Hz 3Φ
Fluides et énergie
Power: 380V 50Hz 3-phase, 56 kW; Purified water: ~2600 kg/batch; WFI: ~1300 kg/batch; Pure steam: 0.25 MPa, ~160 kg/batch; Compressed air: 0.6–0.8 MPa, 1.8 m³/batch; Incoming power cable: 4+PE×16 mm²; Control cable: 60+PE×1 mm²
Puissance
56 kW
Pression d’air
0.6-0.8 MPa
Dimensions
Longueur
3300 mm
Largeur
2300 mm
Hauteur
2600 mm
Poids
4500 kg
Matériaux
Matériaux en contact
SS316; SS316L (drum and product-contact surfaces, Ra ≤ 0.4 μm)
Matériaux du bâti
SS304 (outer skin and jacket cover); carbon-steel frame (powder-coated); chloride-free aluminum-silicate wool insulation (50 mm)
Caractéristiques principales
Compliant with 2010 GMP, EU cGMP, US FDA
Vacuum auto-feeding through top-mount feeder
Central water-curtain spray (laser-cut nozzles, frequency-controlled pump pressure)
Air-water mixed boiling rinse with bubble-collapse cleaning
Vacuum degassing for crevice and pin-hole cleaning
Self-circulating fine wash (two-stage filtration) saves WFI
Pure-steam sterilization at 121℃ with F0 recalculated every 6 seconds
Vacuum drying plus 100-class hot-air drying
Pulsed vacuum cooling to ≤60℃ before discharge
Fully-enclosed sterile discharge system with transparent sight glass and CIP/SIP
Fixed elephant-trunk discharge (no rotating wear, zero metallic-particle risk)
Double-shaft (front + rear) drum support, externally driven
Dual mechanical + PTFE flexible drum-shaft seals
Active condensate / low-temperature steam evacuation via PLC-controlled angle-seat valves (replaces traditional steam traps)
Cold-spot dual RTD probe + mid-chamber control RTD; ±0.5℃ heat-distribution control
Pressure transmitter for chamber pressure regulation
Position-feedback signal on every executive valve
Pneumatic and program inter-locked feed/discharge doors
Over-pressure dual safety (safety valve at 0.16 MPa)
Optional 100-class FFU isolator at discharge port for B-grade cleanroom integration
Drum and rear-head removable on rail trolley for full internal cleaning
Siemens S7-1200 PLC + 12" Siemens HMI (Chinese, English optional)
Four-level password management, electronic signature, audit trail
Recipe management (50+ recipes), USB data export, Brother thermal printer
Wireless heat-distribution / heat-penetration validation tooling
All product-contact surfaces SS316/316L Ra ≤ 0.4 μm, fully radiused, no dead legs
Fourth-generation product proven across 30+ provinces and exported abroad
Patented dual-shaft drum support eliminates support-roller friction contamination
Patented sterile discharge port couples directly with stopper transfer systems
F0 recalculated every 6 s instead of every 60 s — tighter sterilization control
Active condensate evacuation gives ±0.5℃ uniformity (better than steam-trap designs)
Audit trail upgraded to meet new GMP data-integrity requirements
Higher-grade configuration than peers (Siemens, Schneider, Grundfos, GEMU, Camozzi)
Applications
Rubber stopper washing for powder injectables
Rubber stopper washing for lyophilized powder injectables
Rubber stopper washing for water injections (small-volume parenterals)
Rubber stopper washing for oral liquids
Rubber stopper washing for large-volume parenterals (LVP)
Aluminum cap washing
Secteurs
Fabrication pharmaceutique
Injectable drug production
Sterile API manufacturing
Marques des composants
PLC (CPU 1214C, SM1223, SM1231)
Siemens S7-1200
HMI (12" main, 7" discharge)
Siemens / Kunlun-Tongtai
Circuit breakers, contactors, sockets
Siemens
Intermediate relays
Schneider
VFD, switching power supply, industrial switch
Delta
Pressure transmitter, PT100 RTD
Xun'er
Level switch
Omron
Pneumatic valves
Hebron
Pneumatic FRL units, filter regulators
KAIYUAN
Manual ball valve, manual sampling valve, horizontal steam trap, top breather
Wenzhou
Vertical steam trap
Zhongzhi Jinggong
Safety valve
Zhejiang Haiyi
Pressure-reducing valve
Zhejiang Yongjiu
Pure-steam pressure gauge
Bourdon
Booster water pump
GLOBAL
Vacuum pump
Feiyao
Liquid filter, compressed-air sterile breather
Cobetter
Mechanical seal
Zhejiang Lantian
Door inter-lock pneumatic cylinders
Camozzi
Diaphragm/angle-seat valves (preferred imported brand)
GEMU
Imported water pump (preferred)
Grundfos
Thermal printer
Brother
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Conformité
China 2010 new-version GMP
EU cGMP
US FDA standards
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial