Accueil / Équipements / Étuve de séchage à air chaud / Electric Blast (Forced-Air) Constant-Temperature Drying Oven — 655 L

SED-655RFX-B

Sur devis

SED-655RFX-B

SED · SED-655RFX-B · En vedette

SED-655RFX-B — 655 L

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-655RFX-B electric blast (forced-air) constant-temperature drying oven. 655 L chamber, control range RT+10°C to 300°C, fluctuation ±1.0°C, resolution 0.1°C. Inner chamber 840×600×1,355 mm, mirror-finish stainless stee

Délai de livraison

Sur devis

Cadence

655 L

Fonctionnement

Rear-mounted electric tubular heaters warm air, which a high-temperature-tolerant blower circulates through the chamber via dedicated air ducts, ensuring all four sides of the load see uniform hot air. The microcomputer PID controller modulates heater output to hold the set point (RT+10°C to 300°C) within ±1.0°C; an independent over-temperature limit alarm cuts power if deviation exceeds the set band. Timer (1–9,999 min) ends the cycle automatically. 8 cm insulation between cabinet and chamber minimizes heat loss.

Processus de fonctionnement

1Rear-mounted electric tubular heaters warm air, which a high-temperature-tolerant blower circulates through the chamber via dedicated air ducts, ensuring all four sides of the load see uniform hot air.

2The microcomputer PID controller modulates heater output to hold the set point (RT+10°C to 300°C) within ±1.0°C; an independent over-temperature limit alarm cuts power if deviation exceeds the set band.

3Timer (1–9,999 min) ends the cycle automatically.

48 cm insulation between cabinet and chamber minimizes heat loss.

Caractéristiques techniques

Caractéristiques de la variante : SED-655RFX-B

Caractéristiques

Modèle

SED-655RFX-B

Cadence

655 L

Tension

380V 50Hz 3Φ

Puissance

5 kW

Dimensions

Longueur

1030 mm

Largeur

920 mm

Hauteur

1800 mm

Poids

257 kg

Matériaux

Matériaux en contact

Mirror stainless steel interior; synthetic silicone door seal

Matériaux du bâti

Cold-rolled steel with electrostatic powder coating (outer); mirror stainless steel (inner); 8 cm insulation layer

Caractéristiques principales

655 L blast (forced-air) drying chamber

Control range RT+10°C to 300°C with ±1.0°C uniformity

Microcomputer PID controller with deviation alarm and timer (1–9,999 min)

Mirror stainless steel inner chamber with rounded corners and 4 adjustable shelves

Rear-mounted heaters to prevent liquid drip combustion

8 cm insulation layer for energy efficiency

Independent over-temperature limit alarm system

Continuous-duty high-temperature blower for uniform circulation

New synthetic silicone door seal for long-term high-temperature service

Large 655 L capacity for batch drying

Tight ±1.0°C uniformity at temperatures up to 300°C

Hygienic mirror stainless interior with easy-clean rounded corners

Multi-layer safety: PID over-temp deviation protection + independent limit alarm

Optional 30-segment programmable controller, RS485, touchscreen, and printer

Applications

Sample drying and constant-temperature experiments

Heat treatment or curing of components and materials

Moisture removal from powders, granules, or raw materials

Secteurs

Pharmaceutical R&D

Chemical

Food

Foundry / casting

Automotive

Mechanical manufacturing

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →