Accueil / Équipements / Chambre de séchage / SED-3PHGB-K 3P Mobile Integrated Heat Pump Drying Room

SED-3PHGB-K

Sur devis

SED-3PHGB-K

SED · SED-3PHGB-K · En vedette

SED-3PHGB-K — SED-3PHGB-K 3P Mobile Integrated Heat Pump Drying Room

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

3P mobile integrated closed-loop dehumidifying heat pump drying room (side air outlet). One-piece cabinet with casters for mobility — no installation needed, plug-and-play. Drying chamber temperature 40–75°C, dehumidific

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Closed-loop heat pump drying system. The heat pump evaporator absorbs the latent heat of moisture from materials in the drying room air, achieving condensation dehumidification. The absorbed heat is compressed and transferred via the condenser/fan unit into hot air. The hot air circulates repeatedly inside the drying room — heating, absorbing moisture, and condensing — until the material is dry.

Processus de fonctionnement

1Closed-loop heat pump drying system.

2The heat pump evaporator absorbs the latent heat of moisture from materials in the drying room air, achieving condensation dehumidification.

3The absorbed heat is compressed and transferred via the condenser/fan unit into hot air.

4The hot air circulates repeatedly inside the drying room — heating, absorbing moisture, and condensing — until the material is dry.

Caractéristiques techniques

Caractéristiques de la variante : SED-3PHGB-K

Caractéristiques

Modèle

SED-3PHGB-K

Tension

380V/50Hz

Puissance

2.4 kW

Dimensions

Longueur

2550 mm

Largeur

2000 mm

Hauteur

2300 mm

Matériaux

Matériaux en contact

304 stainless steel mesh (baking trays)

Matériaux du bâti

201 stainless steel (drying trolleys); galvanized powder-coated sheet metal (circulation fan wall); 100 mm polyurethane double-sided color-steel sandwich panel (drying room insulation)

Caractéristiques principales

Integrated closed-loop dehumidifying heat pump dryer (3P side-outlet)

Compressor rated power: 2.4 kW

Internal circulation fan: 0.37 kW

Auxiliary electric heater: 4 kW

Rated heating output: 11 kW

Drying room temperature: 40–75°C

Dehumidification capacity: 9 kg/h (rated conditions: 50°C, RH ≥70%)

Dedicated heat pump dryer controller with 7-inch touch control screen

Exhaust fan: Model 300, 0.06 kW

Motorized damper: 210×210 mm

Circulation fan wall: 0.55 kW × 3 units, galvanized powder-coated sheet metal

Fixed drying trolleys: 1210×870×1750 mm, 15 tiers, 201 stainless steel × 2

Baking trays: 800×600×50 mm, 304 stainless steel mesh × 60

Insulation: 100 mm polyurethane double-sided color-steel sandwich panel

Double-leaf door (1 panel)

Base with casters — mobile, no installation, plug-and-play

Integrated mobile design — no installation, plug-and-play

Closed-loop heat pump for high-efficiency dehumidification and energy saving

Complete package includes drying trolleys and baking trays

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

Periodically start the machine in empty (no-load) heating/drying mode to keep the interior dry. Rinsing the interior with water is not recommended.