Accueil / Équipements / Autoclave à vide pulsé / Pulsating Vacuum Pressure Steam Sterilizer (Autoclave)
SED-360MM-U
Sur devis
SED-360MM-U
SED · SED-360MM-U · En vedette
SED-360MM-U — Pulsating Vacuum Pressure Steam Sterilizer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-360MM-U Pulsating Vacuum Pressure Steam Sterilizer (autoclave). Horizontal, electric heating with built-in 30kW steam generator. Total power 2.0kW + 30kW steam generator. Chamber 61×61×100cm, capacity 367L (~360L rat
Délai de livraison
Sur devis
Cadence
367 L
Fonctionnement
Pulsating vacuum cycle: water injection → preheating → multiple negative-pressure pulsations to evacuate air, then trans-pressure pulsation, then multiple positive-pressure pulsations to penetrate steam fully → sterilization at 121–134°C with saturated steam from built-in 30kW generator → flash vacuum drying → dormancy. >99% air discharge after >3 pulsations. PLC microprocessor control with two HMI touch screens; 0.22µm air filter (≥99.97% sterilization).
Processus de fonctionnement
1Pulsating vacuum cycle: water injection → preheating → multiple negative-pressure pulsations to evacuate air, then trans-pressure pulsation, then multiple positive-pressure pulsations to penetrate steam fully → sterilization at 121–134°C with saturated steam from built-in 30kW generator → flash vacuum drying → dormancy.
2>99% air discharge after >3 pulsations.
3PLC microprocessor control with two HMI touch screens; 0.22µm air filter (≥99.97% sterilization).
Caractéristiques techniques
Caractéristiques de la variante : SED-360MM-U
Caractéristiques
Modèle
SED-360MM-U
Cadence
367 L
Tension
3N~AC 380V 50/60Hz
Puissance
32 kW
Dimensions
Longueur
1150 mm
Largeur
1300 mm
Hauteur
1800 mm
Poids
950 kg
Matériaux
Matériaux en contact
SUS304 chamber standard, SUS316L optional; SUS316L weld-type angle-seat valves on all chamber-contact lines; SUS304 sanitary-grade internal-polished piping
Matériaux du bâti
SUS304 inner shell (option SUS316L); Q245R reinforcing ribs (option S30408); aluminum embossed insulation cover; SUS frosted anti-fingerprint trim panels
Caractéristiques principales
Pulsating vacuum cycle (multiple negative + 1 trans + multiple positive pulsations)
Three pre-vacuums for faster heat-up and complete sterilization
Built-in 30kW steam generator
Working temperature 121–134°C; design temp 150°C; max working temp 138°C
Ultimate vacuum −96kPa; vacuum leak rate ≤0.13kPa/min
Double automatic sliding lift doors with pressure safety interlock for clean/dirty area separation
10-inch LCD touch screen — full process auto-control
Mirror-polished + electropolished SUS304 chamber (SUS316L optional)
0.22µm sterile air filter (≥99.97% sterilization efficiency)
Modes: liquid, solid, dressing pack, rubber, BD test, high pressure
Multiple safety valves (chamber and jacket, set 0.28MPa)
Temperature uniformity ±1°C; temperature display accuracy 0.1°C
Silicone door seal — 2-year design life (1200 cycles)
Designed service life 15 years / 30,000 cycles
Premium European components: Siemens PLC, GEMU valves, SPECK vacuum pump, JUMO sensors, WIKA pressure transmitters
316L weld-connection angle-seat valves on all chamber-contact lines
Plasma automatic welding for chamber longitudinal seams; mirror + electropolished surfaces
After-drying weight gain ≤0.6% for fabrics, ≤0.1% for utensils (better than national standard)
Water-ring vacuum pump for reliable evacuation
Heat exchanger improves vacuum speed, ensures vacuum depth, extends pump life, reduces drain water temperature
Applications
Hospital sterilization supply rooms
Third-party sterilization supply centers
Operating rooms and laboratories
Pharmaceutical factory sterilization of instruments, dressings, rubber, lumen instruments, implantable instruments, liquids
Secteurs
Hospitals
Pharmaceutique
Sterilization service providers
Marques des composants
PLC
Siemens S7-200
Sterilization program software
Siemens TIA Portal
HMI (10-inch touch screen)
Siemens
Door drive motor
Kosheng
Door control switch
Tend
Door seal solenoid valve
SMC
Angle-seat pneumatic valve (SS316L)
GEMU
Pneumatic pilot components
SMC
Direct-coupled vacuum pump
SPECK
Chamber safety valve
Yong'an A28Y-10P
Jacket safety valve
Yong'an A28Y-10P
Air filter (0.22µm)
Domestic / PALL
Pressure transmitter
WIKA
Temperature sensor
JUMO
Pressure gauge
WIKA
Mini printer
Beijing Weihuang
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Conformité
CE Certification
ISO 13485
ISO 9001
ISO 45001
ISO 14001
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial