Accueil / Équipements / Armoire de stérilisation à bain d’eau / Water-Bath Sterilizer

SED-29SM-Q

Sur devis

SED-29SM-Q

SED · SED-29SM-Q · En vedette

SED-29SM-Q — Water-Bath Sterilizer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-29SM-Q Water-Bath Sterilizer (29 m³ chamber) uses high-temperature circulating water as the sterilising medium with a shower-type sterilisation process. Excellent temperature uniformity and a wide control range of 80

GMP validation interfaces (DN40)Class-1 pressure vessel certification (China)

Délai de livraison

Sur devis

Cadence

Contactez-nous

Fonctionnement

Hot circulating water shower sterilisation in a closed loop. External steam and cooling water exchange heat with the internal circulating water through a plate heat exchanger to heat the circulating water for sterilisation and then cool the load. Double-door pneumatic sliding doors with compressed-air sealing; door interlock prevents opening above 20 kPa. UPS-backed operation continues sterilisation on power loss; auto-resume after full power restoration. When steam pressure is unstable, the system automatically switches to F0-value control.

Processus de fonctionnement

1Hot circulating water shower sterilisation in a closed loop.

2External steam and cooling water exchange heat with the internal circulating water through a plate heat exchanger to heat the circulating water for sterilisation and then cool the load.

3Double-door pneumatic sliding doors with compressed-air sealing; door interlock prevents opening above 20 kPa.

4UPS-backed operation continues sterilisation on power loss; auto-resume after full power restoration.

5When steam pressure is unstable, the system automatically switches to F0-value control.

Caractéristiques techniques

Caractéristiques de la variante : SED-29SM-Q

Caractéristiques

Modèle

SED-29SM-Q

Dimensions

Longueur

10000 mm

Largeur

14400 mm

Hauteur

3200 mm

Matériaux

Matériaux en contact

SUS 304 acier inoxydable; silicone rubber door seal

Matériaux du bâti

SUS 304 stainless steel chamber (10 mm wall); embossed aluminium insulation cladding; carbon-steel painted base; stainless-steel hairline outer cover

Caractéristiques principales

Wide temperature control range 80-126°C

Design pressure 0.3 MPa, design temperature 129°C

Heat uniformity ≤ +2°C, control accuracy ≤ 0.5°C

6 temperature measurement points

Sterilisation time settable 0-99 minutes

F0-value control auto-engages when steam pressure is unstable

UPS-backed continued sterilisation on power loss; auto-resume after full power restoration

Horizontal cylindrical SUS 304 chamber, 10 mm wall, X-ray weld-inspected class-1 pressure vessel

Double-door pneumatic sliding doors with compressed-air seal and door interlock

Silicone rubber seal rated > 200°C

Standard GMP validation ports (DN40 tri-clamp)

Internal surface roughness ≤ 0.8 µm with rounded corners (no cleaning dead zones)

Stainless-steel 304 spray plate for uniform water distribution

Embossed aluminium insulation cladding

Full automatic upper/lower controller; independent lower controller can run stand-alone

Capacity 29 m³ — up to 5,120 × 500 mL bags per cycle

Class-1 pressure vessel with full X-ray weld inspection

Premium imported components (Siemens PLC/HMI, ASCO valves, JUMO temperature sensors, Danfoss pressure transmitter, Spirax Sarco traps, BAODE plate heat exchanger, D-STRING pumps)

Comprehensive safety: door interlock above 20 kPa, low-water alarm, ground/overload/phase-loss/leakage protection

Applications

Terminal sterilisation of liquid pharmaceuticals in glass bottles, ampoules, plastic bottles, and soft bags

Secteurs

Pharmaceutical injectable manufacturing

Marques des composants

PLC

Siemens

HMI / Touchscreen

Siemens

Pressure transmitter

Danfoss

Temperature sensor

JUMO

Water-hammer arrester valve

ASCO

Angle-seat pneumatic valve

ASCO

Plate heat exchanger

BAODE

Water pump

D-STRING

Steam trap

Spirax Sarco

Safety valve

Guangyi

Pressure gauge

Sinad

Recorder / flow meter / conductivity meter

ARS

Industrial PC

Advantech

Imprimante

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP validation interfaces (DN40)

Class-1 pressure vessel certification (China)