Accueil / Équipements / Laveuse de flacons de laboratoire / Fully Automatic Laboratory Glassware / Utensil Washer-Disinfector

SED-260SXP-I

Sur devis

SED-260SXP-I

SED · SED-260SXP-I · En vedette

SED-260SXP-I — Fully Automatic Laboratory Glassware / Utensil Washer-Disinfector

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-260SXP-I fully automatic laboratory glassware/utensil washer-disinfector. Cleans, disinfects and dries glass, ceramic, plastic and metal vessels — test tubes, petri dishes, volumetric flasks, conical flasks, graduate

CEISO 9001ISO 45001ISO 14001CNAS / CMA test reports (TOC, conductivity, particulate, anion, pH)GMP traceability

Délai de livraison

Sur devis

Cadence

800 L chamber capacity

Fonctionnement

Wash-disinfect-dry cycle: water enters via rear basket coupling into rotating upper/lower spray arms (fan nozzles, asymmetric pattern); Swedish circulation pump (0-800 L/min) recirculates wash and rinse solutions through a 3-stage filter; peristaltic pumps dose acid and detergent from internal 2×5 L reservoirs; dual temperature sensors hold the programmed temperature curve; HEPA-filtered fan + 4.5 kW heater dries vessels; dual steam condensers prevent room humidity rise.

Processus de fonctionnement

1Wash-disinfect-dry cycle: water enters via rear basket coupling into rotating upper/lower spray arms (fan nozzles, asymmetric pattern); Swedish circulation pump (0-800 L/min) recirculates wash and rinse solutions through a 3-stage filter; peristaltic pumps dose acid and detergent from internal 2×5 L reservoirs; dual temperature sensors hold the programmed temperature curve; HEPA-filtered fan + 4.5 kW heater dries vessels; dual steam condensers prevent room humidity rise.

Caractéristiques techniques

Caractéristiques de la variante : SED-260SXP-I

Caractéristiques

Modèle

SED-260SXP-I

Cadence

800 L chamber capacity

Tension

380V ±10%, 50Hz

Détails de conformité

Pharmacopoeia 2015 purified-water source; CNAS/CMA test reports for TOC, conductivity, particulate, anion residue, pH; 100% 24-hour leak test on all welds; basket fatigue + salt-spray test reports; pipeline pressure monitoring.

Puissance

10 kW

Dimensions

Longueur

672 mm

Largeur

660 mm

Hauteur

1835 mm

Matériaux

Matériaux en contact

316L 8K mirror-polished stainless inner chamber (Ra <0.51 µm); polished stainless wash piping (Ra <0.51 µm)

Matériaux du bâti

304 stainless outer shell; double-wall detachable heat- and sound-insulated panel; R15 rounded-corner design

Caractéristiques principales

Siemens PLC + 10-inch touch LCD with adjustable brightness, no metal keys (anti-jam)

4 standard wash programs + custom user programs

Self-pulling door lock with 2 closing strokes and 3 photoelectric sensors

Trilingual interface: Chinese / English / Russian

Real-time PID flowchart on HMI showing equipment state

3-level water-level sensors prevent overflow

Interlocked door (cannot open during run — scald protection)

Inflow / dual-temperature / overheat / detergent monitoring with auto-alarm and printer log

Swedish import circulation pump 0-800 L/min with soft-start and overload sensor

Built-in pure-water booster system

USB interface (PC / printer / USB stick); on-board chip stores 20,000 cycles (GMP traceability)

Modular basket system: 4-layer rails, 3 inlets, up to 6 modular baskets

Internal lighting; sight window in door

HEPA drying: 140 m³/h, up to 100 °C, with dual steam condensers

3-stage internal filter to prevent blockage and secondary contamination

Pharmacopoeia-grade cleanliness with TOC/conductivity/particulate/anion/pH verification (CNAS/CMA test reports)

316L 8K mirror chamber polished to Ra <0.51 µm; pipework Ra <0.51 µm; outer Ra ≤0.9 µm

100% 24-hour water-leak test on all welds (GTAW automatic-track welded)

12+ years manufacturing experience; nationwide service network with 1-hour response, 24-hour resolution

Basket fatigue + salt-spray tested; stainless basket electrolytically treated

Applications

Test tubes, petri dishes, volumetric flasks, conical flasks, graduated cylinders

Glass, ceramic, plastic and metal labware

Pharmaceutical and laboratory vessel washing-disinfection-drying

Secteurs

Pharmaceutical (injectable / water-for-injection)

Laboratoire

Hospital / clinical

Marques des composants

PLC

Siemens

Circulation pump (0-800 L/min)

Swedish import

HEPA filter / drying fan

supplier-installed

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

ISO 9001

ISO 45001

ISO 14001

CNAS / CMA test reports (TOC, conductivity, particulate, anion, pH)

GMP traceability

High-tech product certificate