Accueil / Équipements / Laveuse de bouchons en caoutchouc / Antibiotic / Small-Volume Injection Equipment — Rubber Stopper Washer-Dryer
SED-20YX-K
Sur devis
SED-20YX-K
SED · SED-20YX-K · En vedette
SED-20YX-K — Rubber Stopper Washer-Dryer
La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English
SED-20YX-K Fully-Automatic Rubber Stopper Washer-Dryer — washes, rinses, dries, and cools rubber stoppers (Φ17, 200,000 per batch) in one sealed chamber, eliminating cross-contamination. Combines high-pressure spray + tu
Délai de livraison
Sur devis
Cadence
Contactez-nous
Fonctionnement
Rubber stoppers are loaded through the feed port simultaneously with water. When the water level reaches the set height the level sensor stops water intake. During cleaning, the drum rotates slowly while the auxiliary water inlet opens for washing; overflow removes floating debris. After draining, fresh water is fed for fine wash with ultrasonic cleaning, water-circulation spray, and drum rotation. After draining again, the hot-air circulation system dries at 70–150 °C and then cools to ≤40 °C before discharge. Full sequence: load → fill → coarse wash → drain → fine wash → drain → dry → cool → discharge.
Processus de fonctionnement
1Rubber stoppers are loaded through the feed port simultaneously with water.
2When the water level reaches the set height the level sensor stops water intake.
3During cleaning, the drum rotates slowly while the auxiliary water inlet opens for washing; overflow removes floating debris.
4After draining, fresh water is fed for fine wash with ultrasonic cleaning, water-circulation spray, and drum rotation.
5After draining again, the hot-air circulation system dries at 70–150 °C and then cools to ≤40 °C before discharge.
6Full sequence: load → fill → coarse wash → drain → fine wash → drain → dry → cool → discharge.
Caractéristiques techniques
Caractéristiques de la variante : SED-20YX-K
Caractéristiques
Modèle
SED-20YX-K
Tension
AC 50Hz, 380V
Puissance
40 kW
Pression d’air
0.6~0.8 MPa, 2.0 m³
Dimensions
Longueur
3600 mm
Largeur
1800 mm
Hauteur
2100 mm
Poids
2800 kg
Matériaux
Matériaux en contact
316L stainless-steel washing drum; 316L stainless-steel discharge chute; 304 stainless-steel feed hopper; 304 stainless-steel piping; silicone rubber seals; PTFE
Matériaux du bâti
Carbon-steel frame; 304 stainless-steel brushed-panel casing and thermal insulation cladding
Caractéristiques principales
200,000 stoppers (Φ17) per batch
Integrated sealed washing, rinsing, drying and cooling — eliminates cross-contamination
Multi-stage cleaning: high-pressure spray + tumble coarse wash, water-mix boil rinse, ultrasonic cleaning, self-circulating fine wash, WFI rinse
316L stainless-steel drum with flexible screen-hole structure, no burrs
3 spiral baffles inside drum (tumble + reverse-rotation discharge)
Mirror-polished interior Ra ≤ 0.4 µm
Chlorine-free silicate-cotton insulation
External-drive mechanical seal + sanitary dual seal
Suspended arm support — no rubber particle contamination
Feed and discharge doors in separate cleanroom areas
Hot-air circulation system with 100-class HEPA
Drying temperature 70–150 °C
Moisture after drying ≤ 1‰
Discharge temperature ≤ 40 °C
PLC full-auto control + Delta colour touch-screen
Chinese/English bilingual UI
3-level password management (operator / process engineer / administrator)
Electronic signature and electronic records
USB log printing
Auto / semi-auto / manual selectable
VFD-controlled drum 0.5–10 rpm stepless
Total power ~40 kW
Complies with GMP / EU cGMP / FDA
4th-generation product with over 10 years of manufacturing experience
Compact structure, good performance, easy operation
Ultrasonic cleaning causes no damage to rubber stoppers
Clean-room hot-air drying in sealed environment
3-level password management for full traceability
Applications
Rubber stopper washing and drying
Aluminum cap washing
Secteurs
Pharmaceuticals
Injectable preparations
Antibiotic powder and small-volume injections
Marques des composants
PLC
Delta
Touch-screen HMI
Delta
VFD
Delta (Taiwan)
AC contactor
CHINT
Thermal overload relay
CHINT
Relay
CHINT
Power supply
CHINT
Selector switch
CHINT LA42 Y2
Indicator lamp & pushbutton
CHINT AD17KA/LA42P
Blower
Domestic DE-160 380V/1.1kW
Cycloidal gearbox
Jiangsu Changzhou BWD131-289 1.1kW
Level sensor
Zhejiang 100HZT
Water pump
Nanfang Pump (Hangzhou JV)
Pneumatic triple unit
Taiwan-made
Pneumatic filter
Deyizhou
External mechanical seal
Zhejiang Wolken 212B-65 acid/alkali-resistant carbide/PTFE
Drum bearing
Zhejiang Haining special mixed bearing
SED
Échangez avec SED Sales Team
Spécialistes des équipements · contact sur WhatsApp
Consultez les horaires et la disponibilité de l’équipe
Conformité
GMP
EU cGMP
FDA
Documentation
Fiche technique (PDF)
Aperçu de l’équipement, caractéristiques et dimensions · Document d’origine (anglais)
Demander au service commercial
Manuel opérateur
Installation, fonctionnement et dépannage · Document d’origine (anglais)
Demander au service commercial
Fiche comparative (Standard et Économique)
Comparaison des configurations · Document d’origine (anglais)
Demander au service commercial
Protocoles IQ / OQ / PQ
Documentation de validation pour la conformité GMP · Document d’origine (anglais)
Demander au service commercial
Protocoles FAT / SAT
Essais de réception en usine et sur site · Document d’origine (anglais)
Demander au service commercial
Plans CAD (STEP / IGES / DWG)
Plans d’ingénierie pour l’implantation · Document d’origine (anglais)
Demander au service commercial
Certificats d’étalonnage
Niveau sonore, résistance de terre, rigidité diélectrique et rugosité · Document d’origine (anglais)
Demander au service commercial
DQ (qualification de la conception)
Protocole complet de qualification de la conception · Document d’origine (anglais)
Demander au service commercial
Certificats matières
Composition de l’acier inoxydable 316L · Document d’origine (anglais)
Demander au service commercial