Accueil / Équipements / Mélangeur horizontal à ruban (moyen, 500-2000L) / Ribbon Mixer (Horizontal Double-Spiral) - SED-1500LD-H

SED-1500LD-H

Sur devis

SED-1500LD-H

SED · SED-1500LD-H · En vedette

SED-1500LD-H — Ribbon Mixer - SED-1500LD-H

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1500LD-H Horizontal Double-Spiral Ribbon Mixer. 1500 L total volume, load efficiency 0.4–0.8 (effective working capacity 600–1200 L). Full SUS304 construction with 5 mm cylinder wall and 10 mm ribbon blades. Counter-

Choisir une variante (15)

Délai de livraison

Sur devis

Cadence

600–1200 L (total volume)

Fonctionnement

Mounted on the horizontal stirring shaft are inner and outer helical ribbon blades. The inner spiral conveys material near the shaft axially away from the discharge port; the outer spiral conveys material near the cylinder wall toward the discharge port. The opposing convective motion of the double helix achieves rapid, uniform, low-power mixing.

Processus de fonctionnement

1Mounted on the horizontal stirring shaft are inner and outer helical ribbon blades.

2The inner spiral conveys material near the shaft axially away from the discharge port; the outer spiral conveys material near the cylinder wall toward the discharge port.

3The opposing convective motion of the double helix achieves rapid, uniform, low-power mixing.

Caractéristiques techniques

Caractéristiques de la variante : SED-100LD-H (100 L

Caractéristiques

Modèle

SED-1500LD-H

Cadence

600–1200 L (total volume)

Tension

AC 380V 50Hz, 3-phase

Fluides et énergie

AC 380V 50Hz 3-phase; 11 kW motor; 20# mechanical oil for reducer (replace every 3 months); high-temperature grease for rolling bearings

Détails de conformité

Full SUS304 construction; PTFE seal rings; SUS304 discharge valve

Puissance

11 kW

Dimensions

Longueur

3180 mm

Largeur

1020 mm

Hauteur

1550 mm

Poids

1800 kg

Emprise au sol

3180 × 1020 × 1550 mm; install indoors with adequate operating clearance

Matériaux

Matériaux en contact

SUS304 acier inoxydable; PTFE (seal ring)

Matériaux du bâti

SUS304 acier inoxydable; stainless steel castings

Caractéristiques principales

Total volume 1500 L (working 600–1200 L at 0.4–0.8 load efficiency)

Full SUS304 stainless construction

5 mm thick mixing cylinder wall (Zhangpu SUS304)

10 mm thick SUS304 ribbon blades

Counter-flow double-helix design for rapid convective mixing

11 kW cycloid gear reducer drive

PTFE (tetrafluoroethylene) shaft seals + stainless cast seal seat

SUS304 discharge valve (Wuxi)

Delixi electrical components

Compact, easy-to-clean stainless exterior frame with top cover for inspection

Low power, high efficiency mixing in short cycle

Full stainless steel — sanitary and clean

Mature LD series design (100 L to 15,000 L)

Reliable PTFE seal rings and cycloid gear reducer

Compact footprint relative to capacity

Applications

Mixing of dry powders and granules

Premix preparation

Solid-solid blending

Powder homogenization

Secteurs

Pharmaceutique

Food

Chemical

Animal feed

Health products

Marques des composants

Zhangpu — SUS304 mixing cylinder and wallboard

Hazhou — bearings and bearing seats

Wuxi — SUS304 discharge valve

Delixi — electrical components

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

SUS304 construction throughout for easy cleaning; PTFE seal rings at shaft ends prevent contamination; remove top cover for material inspection and cleaning