Accueil / Équipements / Sécheur à lit fluidisé GF — production (≥100 kg/batch) / Fluid Bed Dryer – SED-GF Fluidized Bed Dryer

SED-120GF-T

Sur devis

SED-120GF-T

SED · SED-120GF-T · En vedette

SED-120GF-T — SED-GF Fluidized Bed Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

The SED-120GF-T is a round-body fluidized-bed dryer with a batch capacity of 100–120 kg per batch (throughput 80–240 kg/h). Material is suspended in a stream of clean, filtered, heated air under negative pressure, achiev

GMP

Délai de livraison

Sur devis

Cadence

80–240 kg/hour

Fonctionnement

Clean hot air enters from the rear inlet, passes through primary, medium, and HEPA filters and an electric heater, then enters the fluidized bed where powder is brought into a fluidized state. Moisture is evaporated and carried out by the exhaust fan. A dual-chamber pneumatic bag-shake system alternately cleans the filter bags during continuous operation, allowing uninterrupted fluidization and spray-drying.

Processus de fonctionnement

1Clean hot air enters from the rear inlet, passes through primary, medium, and HEPA filters and an electric heater, then enters the fluidized bed where powder is brought into a fluidized state.

2Moisture is evaporated and carried out by the exhaust fan.

3A dual-chamber pneumatic bag-shake system alternately cleans the filter bags during continuous operation, allowing uninterrupted fluidization and spray-drying.

Caractéristiques techniques

Caractéristiques de la variante : SED-120GF-T

Caractéristiques

Modèle

SED-120GF-T

Cadence

80–240 kg/hour

Fluides et énergie

Electrical supply (standard: 600 V / 60 Hz for export; or 380 V / 50 Hz domestic); compressed air 0.4–0.6 MPa, consumption 0.6 m³/min

Matériaux

Matériaux en contact

304 acier inoxydable

Matériaux du bâti

304 stainless steel (all wetted and structural parts)

Caractéristiques principales

Round body with no dead corners; tilting discharge for fast, complete unloading

Anti-static filter bags with explosion-relief port on top of the unit

Dual-chamber alternating bag-shake system for continuous fluidization

Both manual and automatic operation modes

Bladder (air-bag) seal between base ring and body for tight, clean sealing

Material container fitted with sample port, temperature sensor quick-connect, and sight glass

All product-contact parts in 304 stainless steel

CSA-certified electrical components (Siemens) and fan (Jiangsu Dazhong) for North American market

High thermal efficiency: material suspended in hot airflow for maximum heat-transfer surface area

GMP-compliant closed negative-pressure operation with filtered inlet air

Fast colour-change between batches: no dead corners, rapid tilting discharge

Continuous drying possible with dual-chamber shake-down filter system

Touch-screen PLC control; supports both manual and fully automatic modes

Applications

Granule drying in solid dosage manufacturing

Spray granulation and coating (fluidized-bed process)

Powder drying for pharmaceuticals and nutraceuticals

Secteurs

Pharmaceutique

Nutraceutical / health food

Marques des composants

PLC / control panel

Siemens

Exhaust fan (18.5 kW)

Jiangsu Dazhong

Pneumatic components

Airtac

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP