Accueil / Équipements / Sécheur sous vide à plateaux carrés (FZG / FZG1 / FZG2) / Static Square Vacuum Dryer (GMP Certified)

SED-10FZG-H

Sur devis

SED-10FZG-H

SED · SED-10FZG-H · En vedette

SED-10FZG-H — Static Square Vacuum Dryer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-10FZG-H Static Vacuum Dryer (Reach GMP). Chamber inside 1500×1800×1220 mm, outside 1924×2500×1513 mm; 10 baking shelves (top layer is steam coil so 9 usable), 48 trays 460×640×45 mm; drying capacity 120 kg/batch; pip

GMP

Choisir une variante (2)

Délai de livraison

Sur devis

Cadence

120 kg/batch

Fonctionnement

Static batch vacuum drying: Material loaded on trays placed in welded SUS304 baking rack inside chamber. Heating source (low-pressure steam, waste steam, hot water, heat-conducting oil, or electric heating tube) circulates through steam coils between shelves and at top to provide uniform heating ≤150°C. Water-ring vacuum pump 5.5 kW (SKA-5111) plus DDC-JQ50 electromagnetic vacuum check valve evacuate chamber; lowering boiling point of solvent so material dries at low temperature without decomposition/oxidation. Vapor leaves through DN50 vacuum port via water-vapor separator; condenser optional for solvent recovery. Top arch design diverts condensate to box sides instead of trays. Auto pump+valve cycle protects against vacuum-pump water/oil intrusion when vacuum is reached.

Processus de fonctionnement

1Static batch vacuum drying: Material loaded on trays placed in welded SUS304 baking rack inside chamber.

2Heating source (low-pressure steam, waste steam, hot water, heat-conducting oil, or electric heating tube) circulates through steam coils between shelves and at top to provide uniform heating ≤150°C.

3Water-ring vacuum pump 5.5 kW (SKA-5111) plus DDC-JQ50 electromagnetic vacuum check valve evacuate chamber; lowering boiling point of solvent so material dries at low temperature without decomposition/oxidation.

4Vapor leaves through DN50 vacuum port via water-vapor separator; condenser optional for solvent recovery.

5Top arch design diverts condensate to box sides instead of trays.

6Auto pump+valve cycle protects against vacuum-pump water/oil intrusion when vacuum is reached.

Caractéristiques techniques

Caractéristiques de la variante : SED-5FZG-H SED-5FZG-H

Caractéristiques

Modèle

SED-10FZG-H

Cadence

120 kg/batch

Fluides et énergie

Steam (low-pressure / waste steam) or hot water / heat-conducting oil / electric heating tube (customizable heat source); cooling water (≤18 °C for condenser); compressed air for valves; grounding resistance <1Ω

Détails de conformité

Meets GMP certification requirements. Pre-drying sterilization possible (C/D direction vent valve with gas filter; sterilization port with steam filter). Grounding resistance <1Ω. 12-month warranty from installation. Warranty: 12 months since installation, no more than 16 months after delivery. All product-contact surfaces SUS304 stainless steel mirror-finish.

Puissance

5.5 kW

Pression d’air

Pipe pressure inside baking shelf ≤0.784 MPa; vacuum port DN50 (rear top)

Dimensions

Longueur

1924 mm

Largeur

2500 mm

Hauteur

1513 mm

Poids

3200 kg

Emprise au sol

Overall dimensions: 1,924 × 2,500 × 1,513 mm. Two 100 mm viewing windows on door. DN50 vacuum port at rear top. Piping connections: steam/cooling water/vacuum/drain — pipes must slope >3/1,000 for condensate drainage. Optional: 4×M24×300 anchor bolts on 400 mm concrete foundation.

Matériaux

Matériaux en contact

SUS304 stainless steel (chamber inner wall 5–6 mm mirror-finish panels, welded baking rack, stamped baking trays, vacuum pipe DN65, vacuum-breaking pipe DN32, vacuum-destruction pipe DN25); food-grade silicone rubber seals

Matériaux du bâti

SUS304 outer panels 1.2 mm; A3 #8 steel external reinforcing; 50 mm aluminium-silicate fibre-cotton insulation

Caractéristiques principales

SUS304 5-6mm + 8#

10 48 460×640×45 mm

120 kg/

，

5.5 kW+ DDC-JQ50

Y-100 + ，

XMTD-3000 + PT100 K

////

2 Φ100mm

；

，//

，

GMP

、

+ ，

120 kg/+ 48

PID + 5.5 kW

Applications

、、API

Marques des composants

(Shanghai Yatai) - XMTD-3000

Zhangpu - SUS304

Magang - A3 8# steel

Richeng -

Huadong -

(Qingdao) - Y-100

(Shandong) - SKA-5111 5.5 kW

(Ningbo) - DDC-JQ50

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Conformité

GMP

Nettoyage et entretien

Static vacuum operation — no moving parts in contact with material, minimizing contamination risk. Drying rack can be pulled out for internal cleaning. Air inlet and outlet can be opened during cleaning.