Accueil / Équipements / Mélangeur horizontal à ruban (moyen, 500-2000L) / Ribbon Mixer

SED-1000LD-H

Sur devis

SED · SED-1000LD-H · 1 unités vendues

SED-1000LD-H — Ribbon Mixer

La description complète de ce modèle est encore en cours de traduction. Consultez les détails en anglais ou demandez des informations à notre équipe. English

SED-1000LD-H horizontal full-stainless-steel ribbon mixer, 1000 L total volume. Double-helix ribbon blades on a horizontal stirring shaft — inner spiral drives material near the shaft axially away from the discharge port

Délai de livraison

Sur devis

Cadence

800–4800 L total volume

Fonctionnement

Horizontal stirring shaft carries inner and outer double-helix ribbon blades. The inner ribbon pushes material near the shaft axially away from the discharge port; the outer ribbon pushes material near the cylinder wall axially toward the discharge port. The resulting convective counter-flow creates rapid uniform mixing in a short time at low power. PTFE seals at both shaft ends prevent material leakage and ensure cleanliness.

Processus de fonctionnement

1Horizontal stirring shaft carries inner and outer double-helix ribbon blades.

2The inner ribbon pushes material near the shaft axially away from the discharge port; the outer ribbon pushes material near the cylinder wall axially toward the discharge port.

3The resulting convective counter-flow creates rapid uniform mixing in a short time at low power.

4PTFE seals at both shaft ends prevent material leakage and ensure cleanliness.

Caractéristiques techniques

Caractéristiques de la variante : SED-1000LD-H

Caractéristiques

Modèle

SED-1000LD-H

Cadence

800–4800 L total volume

Fluides et énergie

7.5 kW electrical power; No.20 mechanical oil for cycloid gear reducer (replace every 3 months); high-temperature grease for rolling bearings

Détails de conformité

12-month warranty from installation (maximum 16 months after delivery). Engineer site startup available; all travel expenses (flights, accommodation, local transport) borne by buyer.

Puissance

7.5 kW

Dimensions

Longueur

2800 mm

Largeur

920 mm

Hauteur

1320 mm

Poids

1700 kg

Emprise au sol

2.80 m × 0.92 m (L × W); height 1.32 m; install indoors with operator clearance around the machine

Matériaux

Matériaux en contact

SUS304 (mixing cylinder 5 mm, ribbon blades 10 mm, cylinder cover 3 mm, discharge valve)

Matériaux du bâti

SUS304; PTFE seal rings; stainless steel castings for sealing seat and cover

Caractéristiques principales

1000 L total volume; loading factor 0.4–0.8

Motor power 7.5 kW

Weight 1700 kg; dimensions 2800 × 920 × 1320 mm

Full SUS304 construction: cylinder 5 mm, ribbon blades 10 mm, cover 3 mm

Double-helix convective counter-flow mixing for fast uniformity at low power

Cycloid gear reducer drive

PTFE shaft seals at both ends

Cast stainless steel sealing seat and cover

Discharge valve with time relay, delay switch, and emergency stop control panel

Brand-name suppliers: Zhangpu cylinder/wallboard, Hazhou bearings, Wuxi discharge valve, Delixi electrical

Low power, high efficiency — convective double-helix achieves uniform mixing quickly

Compact footprint, easy to clean and operate

Full SUS304 contact surfaces — suitable for pharmaceutical and food-grade applications

10 mm thick ribbon blades for extra durability and long service life

Brand-name components: Delixi electrical, Zhangpu cylinder, Hazhou bearings, Wuxi valve

12-month installation warranty (max 16 months from delivery); engineer site startup available

Applications

High-uniformity powder mixing

Powder + paste or liquid blending

Pharmaceutical raw material blending

Food and chemical powder mixing

Secteurs

Pharmaceutique

Food

Chemical

Marques des composants

Zhangpu mixing cylinder and wallboard

Hazhou bearings and bearing seat

Wuxi discharge valve

Delixi electrical

Cycloid gear reducer

SED

Échangez avec SED Sales Team

Spécialistes des équipements · contact sur WhatsApp

Consultez les horaires et la disponibilité de l’équipe

+86 139 5885 3738

Envoyer un e-mail Discuter sur WhatsApp →Demander un appel de 30 minutes →

Nettoyage et entretien

After each batch, open the cylinder cover, brush down material residue, and wipe clean with stainless tools. PTFE seals at both shaft ends prevent material leakage. Keep electrical wiring and motor free from moisture.