Inicio / Equipos / Lavadora de tapones de goma / Antibiotic Powder / Water Injection Equipment – Rubber Stopper Washing Machine
SED-1YX-K
Consultar
SED-1YX-K
SED · SED-1YX-K · Destacado
SED-1YX-K — Rubber Stopper Washing Machine
La descripción completa de este modelo aún se está traduciendo. Consulte los detalles en inglés o solicite información a nuestro equipo. English
Fully automatic rubber stopper washing and drying machine (4th generation). Designed per China GMP, EU cGMP, and US FDA standards. Washing, rinsing, drying, and cooling all completed in a single closed chamber, eliminati
Plazo de entrega
Consultar
Capacidad de producción
Contáctenos
Funcionamiento
Rubber stoppers are loaded via the inlet into the rotating cleaning drum. Stages proceed automatically: feeding → water inlet → coarse wash (high-pressure spray + drum rotation/stirring) → drainage → ultrasonic + spray rinse (self-circulating fine wash saves water) → siliconization → drainage → spin-dry → hot-air drying (circulating clean air heated through a 100-grade filter; dryer temperature 70–150°C) → cooling (≤40°C) → discharge. Entire process controlled by PLC; parameters preset via touchscreen. Three modes: automatic, semi-automatic, and manual.
Proceso de funcionamiento
1Rubber stoppers are loaded via the inlet into the rotating cleaning drum.
2Stages proceed automatically: feeding → water inlet → coarse wash (high-pressure spray + drum rotation/stirring) → drainage → ultrasonic + spray rinse (self-circulating fine wash saves water) → siliconization → drainage → spin-dry → hot-air drying (circulating clean air heated through a 100-grade filter; dryer temperature 70–150°C) → cooling (≤40°C) → discharge.
3Entire process controlled by PLC; parameters preset via touchscreen.
4Three modes: automatic, semi-automatic, and manual.
Especificaciones técnicas
Especificaciones de la variante: SED-1YX-K
Especificaciones
Modelo
SED-1YX-K
Tensión
AC 50Hz, 380V
Suministros
Pure water: pressure ≥ 0.25 MPa, approx. 400 kg/batch; WFI: pressure ≥ 0.25 MPa, approx. 400 kg/batch; compressed air: 0.6–0.8 MPa, 2.0 m³; electricity: AC 50 Hz, 380 V, total power approx. 28 kW. Piping: main inlet DN=25 mm, secondary inlet DN=25 mm, upper discharge DN=100 mm, drain DN=50 mm.
Detalles de conformidad
Designed and manufactured per China GMP standard; materials,surface finish,rounded transitions,process piping welds,and installation fully comply with GMP. Cross-referenced against EU cGMP and US FDA standards. Equipment establishes complete production and quality control records,traceable and auditable. Supports electronic signature and three-level password management.
Potencia
28 kW
Presión de aire
0.6-0.8MPa/2.0m³
Dimensiones
Longitud
1800 mm
Anchura
1600 mm
Altura
1800 mm
Peso
1800 kg
Superficie de instalación
Overall dimensions: 1,800 × 1,600 × 1,800 mm. Requires: pure water ≥ 0.25 MPa / 400 kg; water for injection ≥ 0.25 MPa / 400 kg; compressed air 0.6–0.8 MPa / 2.0 m³; AC 50 Hz, 380 V power.
Materiales
Materiales en contacto
316L stainless steel (cleaning drum); 304 stainless steel (cleaning tank, feed/discharge hopper, piping); PTFE (Teflon) gaskets and seals; medical silicone rubber seals; PDFE/PVDF as needed
Materiales del cuerpo
Carbon steel frame; 304 stainless steel brushed plate (housing,thermal insulation cover); chlorine-free aluminum silicate rock wool insulation
Características principales
Washing, rinsing, drying, and cooling in a single closed chamber
Eliminates cross-contamination
PLC + color LCD touchscreen control; full Chinese/English switchable interface
Three-level password authorization management (operator / process engineer / manager)
Electronic signature and electronic records (USB print supported)
Capacity: 10,000 Φ20 rubber stoppers per batch
Drum rotational speed: 0.5–10 rpm (variable frequency, stepless)
Advanced ultrasonic cleaning with vacuum degassing
Self-circulating fine wash (water-saving)
Hot-air drying: 70–150°C
Interior surface finish: Ra ≤ 0.4 µm
316L stainless steel cleaning drum with spiral guide plates for auto-discharge
External drum drive (bearing outside cleaning tank) — prevents contamination
212B-65 acid/alkali-resistant hard alloy + PTFE double mechanical seal
Insulation: chlorine-free aluminum silicate rock wool; outer cover 304 SS brushed plate
Compliant with China GMP, EU cGMP, US FDA standards
4th-generation product — proven over 10+ years, deployed in 30+ provinces nationwide and exported internationally
Fully closed single-pass process eliminates cross-contamination
Self-circulating fine wash significantly reduces water consumption
Online monitoring, detection, and control; traceable electronic records
Compliant with China GMP, EU cGMP, and US FDA standards
Capacity 10,000 stoppers/batch; drum speed 0.5–10 rpm (VFD stepless)
Aplicaciones
Rubber stopper cleaning and drying
Aluminum cap cleaning
Pharmaceutical injectable component cleaning
Sectores
Pharmaceutical injectable manufacturing
Antibiotic powder injection
Water for injection (WFI) production
Marcas de componentes
Siemens — PLC and color LCD touchscreen
Schneider — AC contactor (LC1N0610), thermal overload relay (CDG3-DA), relay (RXM2ABABD), power supply, rotary switch, signal lights and buttons
Delta — inverter/frequency converter
Wolken — external mechanical seal (212B-65,acid/alkali-resistant hard alloy + PTFE)
Jiangsu Changzhou — cycloidal pin-wheel reducer (BWD131-289, motor 1.1 kW)
Qingdao — blower fan (DE-160, 380V/1.1 kW)
Nanfang Pump Industry (Hangzhou joint venture) — cleaning water pump (8-30)
Wenzhou suppliers — sanitary thin-wall stainless steel piping (304 SS), quick-release clamps, silicone gaskets, fittings
SED
Hable con SED Sales Team
Especialistas en equipos · contacto por WhatsApp
Consulte el horario y la disponibilidad del equipo
Conformidad
GMP (China)
cGMP (EU)
FDA (US) standard reference
Limpieza y mantenimiento
All process steps (washing, rinsing, drying, cooling) complete automatically in sequence. The cleaning drum interior and spiral guides have Ra ≤ 0.4 µm mirror finish; tank interior Ra ≤ 0.4 µm. Self-circulating fine wash uses pump + filtration to recirculate cleaning water through center spray. After each batch, drainage via electromagnetic valve; drum reverse-rotation for automatic discharge. Maintenance access via side and rear doors; large-diameter discharge opening doubles as manhole for internal cleaning.
Documentación
Ficha técnica (PDF)
Resumen del equipo, especificaciones y dimensiones · Documento original (inglés)
Solicitar al equipo comercial
Manual del operador
Instalación, funcionamiento y diagnóstico · Documento original (inglés)
Solicitar al equipo comercial
Ficha comparativa (Estándar y Económica)
Comparación de configuraciones · Documento original (inglés)
Solicitar al equipo comercial
Protocolos IQ / OQ / PQ
Documentación de validación para conformidad GMP · Documento original (inglés)
Solicitar al equipo comercial
Protocolos FAT / SAT
Pruebas de aceptación en fábrica y en sitio · Documento original (inglés)
Solicitar al equipo comercial
Planos CAD (STEP / IGES / DWG)
Planos de ingeniería para la instalación · Documento original (inglés)
Solicitar al equipo comercial
Certificados de calibración
Nivel sonoro, resistencia de tierra, rigidez dieléctrica y rugosidad · Documento original (inglés)
Solicitar al equipo comercial
DQ (cualificación del diseño)
Protocolo completo de cualificación del diseño · Documento original (inglés)
Solicitar al equipo comercial
Certificados de materiales
Composición del acero inoxidable 316L · Documento original (inglés)
Solicitar al equipo comercial